Dale Tiffany TT10956 Installation guide

ASSEMBLY INSTRUCTIONS:

Item No: TT10956

1. Place the lamp base on a level surface.

2. Place spacer (B) over body (A) and screw the

socket assembly (C) into the base. Pull balance of

cord from base to tighten excess.

3. Screw threaded rod (D) into the socket assembly (C)

and place spacer (E) over threaded rod

4. Place washer (F) onto threaded rod.

5. Place shade (G) over threaded rod and secure

shade in place using finial (H).

6. Insert bulbs into bulb socket.

Uses (2) Maximum 60WATT Type “A” Bulbs or (2) 13Watt CFL Bulbs

(Bulbs not included)

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision 08/16/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...

Download PDF