2. Autonics
  3. MT4N Series Digital Multi Panel Meter
MT4N Series Digital Multi Panel Meter

Autonics MT4N Series Digital Multi Panel Meter User manual

  • Hello! I am an AI chatbot trained to assist you with the Autonics MT4N Series Digital Multi Panel Meter User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
-|Transparent Guide|-
Thank you for choosing our Autonics product.
Read and understand the instruction manual and manual thoroughly before
using the product.
For your safety, read and follow the below safety considerations before using.
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
󸠱
󸠱


Safety Considerations
• 
• 
 
01. Fail-safe device must be installed when using the unit with machinery that
may cause serious injury or substantial economic loss. (e.g. nuclear power
control, medical equipment, ships, vehicles, railways, aircraft, combustion
apparatus, safety equipment, crime / disaster prevention devices, etc.)
󸠱
02. 󸠳
high humidity, direct sunlight, radiant heat, vibration, impact or salinity
may be present.
󸠱
03. Install on a device panel to use.
󸠱
04. Do not connect, repair, or inspect the unit while connected to a power source.
󸠱
05. Check ‘Connections’ before wiring.
󸠱
06. Do not disassemble or modify the unit.
󸠱
 
01. 
22)cable or over and tighten the
terminal screw with a tightening torque of 0.78 to 0.98 N m.
Use the wiring suitable for the load current capacity.
󸠱
failure.
02. 󸠲
󸠱
03. Use a dry cloth to clean the unit, and do not use water or organic solvent.
󸠱
04. 󸠳
into the unit.
󸠱
Cautions during Use
• 

• 
supply device.
• 
disconnecting the power.
• 
• Keep away from high voltage lines or power lines to prevent inductive noise.
󸠱
power line and shielded wire at input signal line.
Do not use near the equipment which generates strong magnetic force or high
frequency noise.
󸠲 Connection with the varistor
󹌍󹌍󹌍
󹌍󹌍󹌍󹌍

󹌍


󹌍 

󹌍

• 
󸠱



4-Digit Multi Panel Meters
MT4N Series

TCD210231AB
Manual

considerations in the manuals.

Software
󹌍󹌍󹌍󸠱󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌕
DAQMaster
󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌐󹌍󹌓󹌍󹌍
󹌍󹌓󹌍󹌍󹌍󹌍󹌕
Product Components
󹌍 Product 󹌍 󹌍
Dimensions
• 
3 83

48

Bracket 󹌖
48.6
 11.6


36.3


+0.3
0
45+0.6
0
Ordering Information
󹌍󹌍󹌍󹌍󹌍󹌍󹌍.
󸠱
MT 4 N - - 
type









Preset output Sub output
Nindicator
0 -
1 -
2 -
3 Transmission
4 communication
5 Transmission



• 󸠱


Connections
Input
• DC voltage







123456
• DC current







123456
• AC voltage







123456
• AC current







123456
Output
• 0: Relay
7 8 9 10 11 12

• 1: NPN open collector
 
7 8 9 10 11 12

• 2: PNP open collector
 
7 8 9 10 11 12

• 3: RelayTransmission (DC 4 - 20 mA)

7 8 9 10 11 12

+ -
• 4:
Relaycommunication

7 8 9 10 11 12

 
• 5:
Relay
Transmission (DC 4 - 20 mA)

7 8 9 10 11 12


 
- +
Communication Interface
RS485
󹌗 󹌍
Application standard 󹌍󹌍󹌍󹌍
󹌗 󹌔󹌍󹌑󹌗󹌍󹌍󹌍󹌒󹌍
󹌗 Asynchronous
󹌗 󹌔󹌍󹌍󹌍
󹌗 󹌍󹌍
󹌗 󹌓󹌍󹌖󹌍󹌓󹌍󹌖󹌍󹌓󹌍󹌖󹌍󹌓󹌍󹌖󹌍󹌓󹌍󹌖󹌍󹌓󹌍
Start bit 󹌔󹌍󹌑󸠱󹌒󹌍
Data bit 󹌔󹌍󹌑󸠱󹌒󹌍
Parity bit 󹌓󹌍󹌓󹌍
Stop bit 󹌔󹌓󹌍󹌔
EEPROM life cycle 󹌍󹌓󹌓󹌍󹌍󹌑󹌍󹌖󹌍󹌒
󸠲
Model MT4N-DV- MT4N-DA- MT4N-AV- MT4N-AA-
Input type    
 allowable input 
Display method c
Display accuracy 󹌍󹌍󹌍󹌍
 󹌍󹌒 
 
󹌗
A / D conversion
method
󹌍󹌍󹌍󹌍󹌍
Sampling cycle 50 ms 16.6 ms
Unit weight
(packaged) 
Approval 
󹌍󹌒󹌍󹌍
󹌍󹌒
Preset output 󹌍󹌑󹌒󹌍󹌖󹌍󹌍󹌖󹌍󹌍󹌍󹌍󹌖󹌍󹌍󹌍󹌍
󹌍
 󹌍󹌗󹌍󹌍󹌍󹌕󹌍󹌓󹌍󹌍󹌍󹌍
󹌍󹌗󹌍󹌕󹌍󹌑󹌒

open collector 󹌍󹌗󹌍󹌍󹌍󹌔󹌍󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌍󹌍
Sub output 󹌍󹌑󹌒󹌍󹌖󹌍󹌍󹌑󹌍󹌍󹌔󹌍󹌍󹌒󹌍󹌖󹌍󹌍
󹌍󹌍󹌍
Transmission

󹌗󹌍󹌖󹌓󹌍󹌑󹌍󹌗󹌍󹌍󹌍󹌒
󹌍󹌗󹌍󹌍󹌍
communication 󹌗󹌍󹌍
Power supply 󹌍󹌔󹌍󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌔󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌖󹌍󹌍󹌍󹌖
󹌍󹌔󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌖󹌍󹌍󹌍
Power consumption
󹌓󹌘󹌔 󹌍󹌍󹌖󹌍󹌍󹌍󹌍󹌒
Power consumption
󹌓󹌔 󹌍
Insulation resistance 󹌍󹌍󹌍󹌑󹌍󹌍󹌒
Dielectric strength
󹌓󹌘󹌔
B󹌍󹌍󹌍󹌍󹌗󹌍
Dielectric strength
󹌓󹌔
B󹌍󹌍󹌍󹌍󹌗󹌍
Noise immunity 󹌒󹌍󹌍󹌍󹌍
Vibration 󹌕󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌑󹌍󹌍󹌒󹌍󹌍
󹌍󹌓󹌍󹌓󹌍󹌍󹌍󹌍󹌍
Vibration
󹌓󹌔
󹌕󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌑󹌍󹌍󹌒󹌍󹌍
󹌍󹌓󹌍󹌓󹌍󹌍󹌍󹌍󹌍
Shock 
󹌓󹌔 
󹌗 󹌔󹌍󹌍󹌍󹌓󹌍󹌗󹌍󹌔󹌍󹌍󹌍󹌍󹌑󹌍󹌍󹌍󹌒
󹌗 󹌍󹌍󹌍󹌓󹌍󹌗󹌍󹌍󹌍󹌍󹌍󹌑󹌍󹌍󹌍󹌒
Insulation type
󹌗󹌍 󹌍󹌍󹌍
󹌍

󹌓󹌍󹌔󹌍󹌔󹌓󹌍󹌔󹌓󹌍󹌓󹌍󹌍󹌍󹌓󹌍
󹌗󹌗󹌖󹌖󹌖󹌗
-|Transparent Guide|-
Mode Setting
RUN
sec Parameter 1
group 󹌍
RUN
sec Parameter 2
group 󹌍
 Parameter 0
group 󹌍
󹌍 Zero adjustment Auto
󹌍 Reset 
Parameter Setting
󹌍 󹌍󹌍󹌍󹌍󹌖󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍
󹌍󹌕󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌕
󹌍 󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌍󹌍󹌍󹌕
󹌍 󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌍󹌚󹌛󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌍󹌍
󹌍󹌕
󹌍 󹌚󹌛󹌍󹌗󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌕
󹌚󹌛󹌍󹌗󹌍󹌍󸠱󹌍󹌍󹌖󹌍󹌍󹌍󹌕
󹌚󹌛󹌓󹌍󹌚󹌛󹌍󹌗󹌍󹌍󹌍󹌕
Parameter 1 group
Parameter Mark Defaults Setting range
Display
condition
1-1 range
IN-R
50 
• 
-
500 
• 
-
250 
• 
-
5
• 
-
 󹌍
method
DISP STND

standard

scale

frequency

-
1-3
󹌍
method
IN-T tRMS

󹌕󹌗󹌍󹌍󹌓󹌍󹌕󹌗󹌍󹌍󹌓󹌍

󹌍 󹌍󹌍 A1󹌍󹌍󹌍󹌍󹌟󹌟󹌟󹌍󹌍n
󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍
󹌍 A󹌍󹌍󹌍
A1󹌍󹌍󹌍󹌍󹌟󹌟󹌟󹌍󹌍n
󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌍
󹌍󹌍
󹌑󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌓󹌍
󹌍󹌍󹌍󹌒

󹌍
󹌗


1-4

value
󸠱
STND
5)00 
󹌕󹌍󹌍󹌍󹌍
󹌔󹌍
󹌍
󹌗󹌍

50)0 
󹌕󹌍󹌍󹌍󹌍
25)0 
󹌕󹌍󹌍󹌍󹌍
%000 
󹌕󹌍󹌍󹌍󹌍
1-5
High-limit
display value
gradient
correction
INbH !000 
1-6

display value
deviation
correction
INbL 00 

󹌍
󹌍
position
DOT
)00 

󹌍
󹌗

&

Decimal
point


0.000
)0 

)000 
1-8
󹌔󹌍
H-SC -
Display value against max. measurement input*

󹌔󹌍
L-SC -
Display value against min. measurement input*
1-10
󹌍 dUNT
V

A

1-11
High-limit
display value
gradient
correction
INbH !000 


display value
deviation
correction
󹌍󹌒
INbL 00 
1-13
󹌍󹌍
position
󹌍󹌒
DOT )0 

󹌍
󹌗

)000  
1-14
High-limit
display value
gradient
correction
INbH !000 
1-15

INbE 10-0 0-11

󹌍󹌒

0

-1
digit regardless of decimal point position.
󹌍󹌒
Dot Display range Frequency measurement range
0 
)0  
)00  
)000  
Parameter 2 group
Parameter Mark Defaults Setting range
Display
condition


󹌍
mode
OU!T OFF


• 
-


󹌍
mode
OU@T OFF


• 
-
 󹌍
hysteresis HYs1 0)01 󹌚󹌍󹌍



󹌍
mode
except
OFF
 
hysteresis HYs2 0)01 󹌚󹌍󹌍



󹌍
mode
except
OFF

Startup
compensation
time
STaT 0)0

 -

Peak
monitoring
delay time
PEkT 00 S 00 to 30 sec -
 󹌍 DIsT )2 S 0.1 to 5.0 sec -

󹌍󹌍
󹌍󹌍
color
COLR RED



󹌍󹌗󹌍󹌍󹌖󹌍󹌍
-
 󹌍󹌍󹌍
󹌍 ZERO NO

󹌍 󹌗󹌍󹌍󹌍󹌚󹌛󹌍󹌍󹌚󹌛󹌍󹌍󹌍󹌍
󹌍󹌍󹌍󹌕󹌍
-

󹌍
󹌍
terminal
EVLN HOLD

 
󹌍 󹌍󹌍󹌍󹌍󹌍󹌍
󹌔󹌍󹌍󹌍󹌍󹌍󹌓󹌍󹌍
󹌍󹌍󹌍󹌍󹌕
-

󹌔󹌍
󹌍󹌍
󹌍
output
FS-H
5)00
Transmission

󹌕󹌍󹌍󹌍󹌍
-
50)0
Transmission

󹌕󹌍󹌍󹌍󹌍
25)0
Transmission

󹌕󹌍󹌍󹌍󹌍
%000
Transmission

󹌕󹌍󹌍󹌍󹌍

󹌔󹌍
󹌍󹌍
󹌍
output
FS-L
0)00
Transmission

󹌕󹌍󹌍󹌍󹌍
-
00)0
Transmission

󹌕󹌍󹌍󹌍󹌍
)0
Transmission

󹌕󹌍󹌍󹌍󹌍
)000
Transmission

󹌕󹌍󹌍󹌍󹌍
 󹌕
Address ADRS 01 communication
 -
 󹌕󹌍
speed BPS 9600 communication
 -
  PRTY NONE communication
 -
  STP 2communication
  -
 
waiting time RSwT 5communication
 -
  LOC OFF

󹌍󹌍
󹌍󹌍󹌓󹌍
󹌍󹌍󹌓󹌍󹌍󹌍
-
Parameter 0 group
Parameter Mark Defaults Setting range
Display
condition
0-1 󹌍󹌔
󹌍󹌍
󹌍
OU!H
5)00 

󹌔󹌍󹌍
operation

󹌍
OFF
25)0 

%000 

 󹌍󹌔
󹌍󹌍
󹌍
OU!L
0)00 

00)0




)000 

0-3 󹌍󹌔
󹌍󹌍
󹌍
OU@H
5)00
󹌍 󹌍󹌍󹌍󹌍󹌍󹌍󹌔
󹌍󹌍󹌍 󹌔󹌍󹌍
operation

󹌍
OFF
25)0
%000
0-4 󹌍󹌔
󹌍󹌍
󹌍
OU@L
0)00
󹌍 󹌍󹌍󹌍󹌍󹌍󹌍󹌔
󹌍󹌍󹌍
00)0
)000
0-5 󹌍󹌕󹌍
󹌍󹌍󹌒 hPEK
)00 

󹌔󹌍󹌍
operation

󹌍
or
󹌔󹌍󹌍
operation

󹌍
&

monitoring

󹌍
)0 

)000 

0-6 󹌍󹌕󹌍
󹌍󹌍󹌒 lPEK
)00 

)0 

)000 

󹌍󹌒󹌗󹌍󹌍󹌍󹌍󹌍󹌚󹌛󹌓󹌍󹌚󹌛󹌓󹌍󹌚󹌛󹌍󹌕
Input range Display range Input
impedance
Diaplay method󸠲 Diaplay method: SCAL 01)
0 - 5 A 0.000 to 5.000 5Decimals Display range
0
)0 
)00 
)000 
󹌕󹌍
  @5 󹌕󹌍
0 - 500 mA 0.0 to 500.0 500 󹌕󹌍
  250 󹌕󹌍
0 - 100 mA 0.0 to 100.0 100 󹌕󹌍
0 - 50 mA 0.00 to 50.00 50 󹌕󹌍

range to measure.

Input range Display range Input
impedance
Diaplay method󸠲 Diaplay method: SCAL 01)
  250 Decimals Display range
0
)0 
)00 
)000 

  125 
 0.00 to 50.00 50 
  25 
 0.000 to 5.000 5
  @5 

range to measure.

Input Range and Display Range
󹌍󹌍󹌕󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌓󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌕
DC voltage model
Input range Display range Input
impedance
Diaplay method󸠲 Diaplay method: SCAL 01)
 0.00 to 50.00 50 Decimals Display range
0
)0 
)00 
)000 

 0.00 to 10.00 10 
 0.000 to 5.000 5
 0.000 to 1.000 1
  250 
 0.00 to 50.00 50 

range to measure.

DC current model
AC voltage model
AC current model
Input range Display range Input
impedance
Diaplay method󸠲 Diaplay method: SCAL 01)
0 - 500 mA 0.0 to 500.0 500 Decimals Display range
0
)0 
)00 
)000 
󹌕󹌍
  200 󹌕󹌍
0 - 50 mA 0.00 to 50.00 50 󹌕󹌍
  4-20 󹌕󹌍
0 - 5 mA 0.000 to 5.000 5󹌕󹌍
  2󹌕󹌍

range to measure.

Output Operation Mode
• 
• 󹌍
operation mode.
󹌍󹌍󹌍󹌍󹌕󹌍

• 󹌔󹌍󹌖󹌍󹌔󹌍󹌍󹌍󹌓󹌍
are reset.
MODE Output operation Preset output
ON OFF
OFF
󹌍󹌍
󹌍output
HI
Hys

󹌕
󹌍󹌍
󹌕󹌍
󹌍󹌍
󹌕󹌍󹌔󹌍󹌕󹌍󹌍
󹌍
LO Hys

󹌕
󹌍󹌍
󹌕󹌍
󹌍󹌍
󹌕󹌍󹌍󹌕󹌍󹌍
󹌍
HL
Hys

󹌕
󹌕
󹌍󹌍
󹌕󹌍
󹌍󹌍󹌍
󹌖󹌍
󹌕
󹌍󹌍
󹌕󹌍󹌍󹌕󹌍
󹌍󹌍󹌍
󹌖󹌍
󹌕󹌍󹌔󹌍󹌕󹌍
󹌍󹌍
HL-G Hys

󹌕
󹌕
󹌍󹌍
󹌕󹌍
󹌍󹌍󹌍
󹌍󹌕󹌍
󹌍󹌕
󹌕󹌍󹌔󹌍󹌕󹌍
󹌍󹌍󹌍
󹌖󹌍
󹌕󹌍󹌍󹌕󹌍
󹌍󹌍
Error

Display Description Troubleshooting
HHHH 󹌍󹌍󹌍󹌍󹌍󹌍󹌍
󹌕󹌍󹌍󹌍󹌑󹌍󹌒 Disconnect power supply

LLLL 󹌍󹌍󹌍󹌍󹌍󹌍󹌍
󹌕󹌍󹌍󹌍󹌑󹌔󹌍󹌒
D-HH 
scale setting value 
range.
D-LL 
scale setting value
F-HH 
max. display value of measured range -
OVER 󹌍󹌍󹌍󹌍󹌍󹌍󹌍󹌑󹌒󹌍
󹌍󹌍󹌍󹌍 
󹌍.
Reset
01. 󸠳
alternately for 0.5 sec in turn.
02. Change the setting value as YES by pressing the direction keys.
03. 
to run mode.
/