Hanover HANCARPRT19X10-GRY User manual

Type
User manual

Hanover HANCARPRT19X10-GRY is a versatile outdoor structure designed to provide protection from the elements while enjoying your garden or patio. It features a sturdy aluminum alloy frame with a white powder-coated finish for durability and resistance to corrosion. The polycarbonate panels are UV-protected, ensuring longevity and protection from harmful sun rays. The sloped roof design allows for proper drainage, preventing water accumulation and ensuring the stability of the structure. Assembly is straightforward, with all necessary tools and hardware included.

Hanover HANCARPRT19X10-GRY is a versatile outdoor structure designed to provide protection from the elements while enjoying your garden or patio. It features a sturdy aluminum alloy frame with a white powder-coated finish for durability and resistance to corrosion. The polycarbonate panels are UV-protected, ensuring longevity and protection from harmful sun rays. The sloped roof design allows for proper drainage, preventing water accumulation and ensuring the stability of the structure. Assembly is straightforward, with all necessary tools and hardware included.

IMPORTANT
You must read these instructions carefully before you start to assemble this .Please ensure that you find all parts
in the carton box in the correct type and quantity as mentioned in the list illustrated in every page accordingly.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
size/cm:576L×300W×192/219H
size/inch:227L×118W×75.6/86H
9820201
Do not tighten the steps until completing the assembly of all the polycarbonate panels.
Installation Tool:
5.Electric screwdriver+5mm Hexagon
2.Spanner 10mm/(25/64) (Ratchet Wrench is better)
1.Triangle Stairs≈
9.Percussion bit(10mm)9.Percussion bit(10mm)(25/64)
3.Spanner 14mm/(35/64) (Install the expansion screw)
4.Hexagon wrench 5mm(13/64)inch
wrench (suggest)
6.Wooden Mallet
7.Marking Pen
10.Knife
11.Phillips screwdriver
4.9 Feet Height
(13/64)inch
2.Angle Square
3.Level Meter
(16.4Feet)
Dispose of all plastic bags safely and keep them out of reach of children.
assembly
5 hours
rinse
Measurement Tools:
1.Tape Measure
206cm / 81inch
576cm / 227inch
300cm / 118inch
276cm / 108.7inch
204cm / 80inch
204cm / 80inch
219cm / 86inch
192cm / 75.6inch
Make sure you choose a correct installation location
high
that
e
8.If injuries occur, please take immediate action to
locate and use a first-aid kit. In case of emergency,
please go to the nearest emergency room.
F4-2 12
6mm
37
R1 x2 R3 x2
F9 33
6-12mm
F4 60
T4.8(3/16)
M6(15/64)
T5(13/64)
M4(5/32)
M6(15/64)
M6(15/64)
M8(5/16)
M6(15/64)
M4(5/32)
116inch
112.7inch
3inch
4.7inch
113inch
113inch
113inch
112.7inch
76.8inch
Schematic diagram of Aluminum frames
Face the white film side towards the sun as they are UV protected
!
1
F4 x4
F9 x9
F9
F9
F4
F4
F9
F4-1
F4-1 x13
F9
F9
F9
56.1inch /
56.1inch /
Skeleton Assembly
Screws Reservation
6
F9 x24
F9
F4-1
F9
Roof Frame Installation
Long Beam Assembly
R1 x2
R1
Connection between long beams and roof skeleton
PC Panels Installation
Frame stators and stoppers
installation
F4-2
Eaves,water outlets Installation
F4-2
R3
R3 x2
Insert the eaves into the grooves
of the long beams.
Caps of long beams
installation
Studdle of columns
installation
F9
3.54inch
Columns Installation
Team Work
Cover all F6, tapping it with wooden hammer ensure it will not fall off.
F6
F6
F6
F6
B1
B1
S8
276cm / 108.7inch
204cm / 80.3inch
204cm / 80.3inch
Cover of roof studdle
installation
1.WARNING: If there is lightening, do not stay in or under the product. The frames are constructed of aluminum alloy, which
2.If there is any distorting with the calibration, please fix immediately. Any distortion can cause the skylight to fall.
1.The frames are made of aluminum alloy structure. If white spots or dirt is shown, please wipe with a wet cloth.
4.The boards/panels have flame retardant polycarbonate material applied to them and is recommended to keep away from
1.When using the product, please do not use sharp objects on collision films to avoid cuts. Be careful not to have a sharp
Maintenance:
1.If the ground is not level, the unit may tilt to one side. If you find this is the case, please fix immediately to avoid damage.
2.Please prevent adding any increased weight to the product.
3.Avoid any vine/climbing plants, fruits, or vegetables from growing on the canopy as to not
compromise the structure
and durability of the product. If the structure is compromised, it can easily cause the frame to
crack, break, or collapse.
PC Panel Maintenance:
2.If films rupture, you may use glue to repair or use transparent tape. Polyurethane adhesive is also available for repairs.
3.Clean films regularly to keep the light transmittance as clear as possible.
object touch the film as it may scratch.
fire to avoid softening or deformation.
Frame Maintenance:
3.If any connection piece rusts, change out the screws to ensure the connection part is firm and stable.
White spots are normal in a wet/warm environment.
Please refer to the instruction manual for repairs.
Weather Protection:
3.Clear any leaves on top of canopy to reduce heat preservation.
4.During snowy months, please remove any snow from pavilion to avoid any walls or roofs from collapsing.
is conductive, and may cause serious damage.
2.When wind power reaches 40mph or above, you may need to set up defense equipment and fix
the shed walls.
To fix the walls, use a strong rope or cable and connect to the four angles of the
anchors with a block
inserted into the
soil or tied to a nearby tree at least 4in.in diameter. When
wind decreases, please remove safety measures of ropes.
Overall Dimension Figure
281cm
10cm
10cm
576cm
75cm 213cm 213cm 75cm
1:20 cm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Hanover HANCARPRT19X10-GRY User manual

Type
User manual

Hanover HANCARPRT19X10-GRY is a versatile outdoor structure designed to provide protection from the elements while enjoying your garden or patio. It features a sturdy aluminum alloy frame with a white powder-coated finish for durability and resistance to corrosion. The polycarbonate panels are UV-protected, ensuring longevity and protection from harmful sun rays. The sloped roof design allows for proper drainage, preventing water accumulation and ensuring the stability of the structure. Assembly is straightforward, with all necessary tools and hardware included.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI