Hagerco 3470 Classroom Lockset Lever - Grade 1 Cylindrical Lever Operating instructions

3400 SERIES

LFIC Timing Instructions

I-LS01987

Rev -, Rev Date: 8/17/2015 27390092 Page 1 of 2

Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com

LH, LHR RH, RHR

1. USING A SCREWDRIVER, ROTATE THE CAM CLOCKWISE UNTIL THE CAM PROFILE LOOKS LIKE THE

PICTURE ABOVE (BASED ON HANDING).

2. INSERT THE CONTROL KEY INTO THE LFIC CYLINDER AND INSTALL PER INSTRUCTIONS.

3. WHEN INSERTING THE CYLINDER INTO THE LEVER, DO NOT FORCE! INSERT UNTIL THE FACE PLATE

IS FLUSH WITH THE LEVER FACE.

3470 / 3473 LEVER SET TIMING INSTRUCTIONS

[SEE PAGE 2 FOR 3495 TIMING INSTRUCTIONS]

3400 SERIES

LFIC Timing Instructions

I-LS01987

Rev -, Rev Date: 8/17/2015 27390092 Page 2 of 2

Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com

LH, LHR OUTSIDE LH, LHR INSIDE

RH, RHR INSIDE RH, RHR OUTSIDE

3495 LEVER SET TIMING INSTRUCTIONS

1. USING A SCREWDRIVER, ROTATE THE CAM CLOCKWISE UNTIL THE CAM PROFILE LOOKS LIKE THE

PICTURE (BASED ON HANDING AND INSIDE / OUTSIDE).

2. INSERT THE CONTROL KEY INTO THE LFIC CYLINDER AND INSTALL PER INSTRUCTIONS.

3. WHEN INSERTING THE CYLINDER INTO THE LEVER, DO NOT FORCE! INSERT UNTIL THE FACE PLATE IS

FLUSH WITH THE LEVER FACE.

4. REPEAT STEPS 1-3 FOR THE OPPOSITE SIDE OF THE LOCK.

NOTE: BOTH CYLINDERS NEED TO BE INSTALLED FOR THE LEVER SET TO FUNCTION

This manual is also suitable for

Download PDF