Vello OCS-FAC User manual

Brand: Vello

Model: OCS-FAC

Type: User manual

This manual is also suitable for

OCS-FAN

FLEXIBLE

TTL ROD

FOR CANON / NIKON FLASHES

OCS-FAC / OCS-FAN

 

The Vello OCS-FAC/

OCS-FAN is a ﬂexible

rod with an integrated

TTL cable that mounts

directly to your camera’s

hot shoe. Ideal for macro

and portrait photography,

it allows photographers

of all levels to experiment

with ﬂash angles while

maintaining all of the TTL ﬂash

functionality of the camera.

The TTL rod sets your ﬂash

o-camera and enables you

to achieve a more natural

or dramatic look. It also

reduces the harsh shadows

of a direct, on-camera ﬂash

as well as the possibility of

red-eye when shooting in

dim light. The gooseneck

design of this TTL rod makes

it possible to be creative

with ﬂash angles either from

above or the side. But once

you’ve decided on an angle,

the sturdy metal construction

assures that your ﬂash will

stay in place while you shoot.

THANK YOU FOR CHOOSING VELLO

LOCK

BottomTo p

Mounting Foot

Locking Wheel

Flexible Rod

Hot Shoe

OVERVIEW

LOCK

• Exercise caution when using

the Flexible TTL Rod. Do

not bend the rod more than

80° or rotate the rod’s hot

shoe. Doing so may damage

the rod.

PRECAUTIONS

• Switch o all devices

(camera and ﬂashes) before

adding or removing a ﬂash

unit.

• Do not attempt to modify

or disassemble the rod,

shoe, or contacts. Do not

attempt to daisy-chain rods.

• This device is not water-

resistant. Do not immerse

in or expose to water, rain,

or snow.

• Do not clean the rod with

solvents. Use a soft, dry

cloth to clean the rod and

connections.

• Do not use the device

in conditions of extreme

heat, severe cold, or high

humidity.

• Images are for illustrative

purposes only.

MOUNTING ON THE CAMERA

. Loosen the locking wheel by

turning it counterclockwise.

2. Position the TTL rod’s

mounting foot with the

Lock indicator facing the

rear of the camera, and

insert the mounting foot

completely into the hot

shoe of your camera.

Note: Make sure the TTL

rod’s mounting foot is facing

the right direction, or your

ﬂash will not be able to

communicate with your

camera.

3. Tighten the locking wheel

by turning it clockwise until

secure.

MOUNTING THE FLASH

. Make sure that both the

camera and ﬂash are

turned o.

2. Set the camera and rod

assembly onto a ﬂat,

stable surface and insert

the mounting foot of the

ﬂash into the hot shoe of

the rod.

3. Use your ﬂash’s locking

mechanism to secure the

ﬂash to the TTL rod.

4. Turn on the ﬂash and the

camera.

SHOOTING WITH THE FLEXIBLE TTL ROD

Bend the rod to position your

ﬂash at the desired angle.

Be careful not to bend the

rod beyond 80° or rotate

the rod’s hot shoe. Doing

so may damage the rod.

When shooting with the TTL

Flexible Rod, hold your camera

with one hand while holding

the TTL rod with the other.

SPECIFICATIONS

OCS-FAC / Canon OCS-FAN / Nikon

Length 3.5" (34.3 cm)

Weight 8.0 oz. (227 g)

Compatible Cameras Canon EOS DSLR Nikon DSLR

Compatible Flashes Canon E-TTL / E-TTL II Nikon i-TTL

0

This VELLO product is warranted to the original purchaser to be free from defects in materials

and workmanship under normal consumer use for a period of one () year from the original

purchase date or thirty (30) days after replacement, whichever occurs later. The warranty

provider’s responsibility with respect to this limited warranty shall be limited solely to repair or

replacement, at the provider’s discretion, of any product that fails during normal use of this product

in its intended manner and in its intended environment. Inoperability of the product or part(s)

shall be determined by the warranty provider. If the product has been discontinued, the warranty

provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident,

alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,

THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you

with speciﬁc legal rights, and you may also have additional rights that vary from state to state.

ONE-YEAR LIMITED WARRANTY



To obtain warranty coverage, contact the Vello Customer Service Department to

obtain a return merchandise authorization (“RMA”) number, and return the defective

product to Vello along with the RMA number and proof of purchase. Shipment

of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com

or call Customer Service at 22-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group.

www.vellogear.com

All other trademarks are the property of their respective owners.

GG1

Vello OCS-FAC User manual

Brand: Vello

Model: OCS-FAC

Type: User manual

This manual is also suitable for

OCS-FAN

Download PDF

report

Vello OCS-FAC User manual

This manual is also suitable for

Vello OCS-FAC User manual

Related papers

Other documents