Home » elvid » elvid 944689 SHOE-HD Heavy Duty Camera Shoe Mount Adapter User Manual

THANK YOU FOR CHOOSING ELVID

The Elvid’s SHOE-HD-MICRO is a rugged, strong, yet extremely low-profile ball head that mounts devices and

accessories that weigh up to 3.3 pounds to a camcorder, camera, or camera cage.

Contents

1 MOUNT THE BALLHEAD TO A SHOE

MOUNT

2 SHOE-HD-MICRO

MOUNT THE BALLHEAD TO A SHOE MOUNT

1. Unscrew the mounting foot and locking wheels from the ball head.

elvid 944689 SHOE-HD Heavy Duty Camera Shoe Mount

Adapter User Manual

Manuals+ — User Manuals Simplified.

2. Slide the mounting foot into the shoe mount, and tighten the bottom locking wheel until it’s secure.

3. Screw the ball head onto the mounting foot until it’s at the desired orientation, and turn the top locking wheel

until it’s tight against the ballhead.

4. Use the locking knob to position and secure the ball head.

replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty

shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal

use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s)

shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves

the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER

ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty

provides you with specific legal rights, and you may also have additional rights that vary from state to state.

Elvid is a registered trademark of the Gradus Group.