Analog way SMART BOOSTER SMB413 User manual

Analog way
Brand
Analog way
Model
SMART BOOSTER SMB413
Category
Video switches
Type
User manual
ANALOG WAY
®
SMART BOOSTER™ EDITION : 04/02
.
SMART BOOSTER
™
(SMB413)
User’s Manual
TABLE OF CONTENTS
SAFETY INSTRUCTIONS...........................................................................................................................................................2
Chapter 1 : INTRODUCTION.......................................................................................................................................................4
Chapter 2 : INSTALLING .............................................................................................................................................................5
Chapter 3 : TECHNICAL DESCRIPTION....................................................................................................................................6
Chapter 4 : TECHNICAL SPECIFICATIONS..............................................................................................................................7
Chapter 5 : CONNECTIONS.........................................................................................................................................................9
WARRANTY...............................................................................................................................................................................11
Page is loading ...
Page is loading ...
Chapter 1 : INTRODUCTION SMART BOOSTER™
PAGE 4
SMART BOOSTER
™
Chapter 1 :
INTRODUCTION
1-1. SUPPLIED EQUIPMENT
• 1 SMART BOOSTER
™
(SMB413).
• 1 AC Power Supply Cord.
• 1 VGA M / M HD 15 Cable (1.8 m / 6 ft).
• 1 S.VIDEO (Y / C) Cable (1.8 m / 6 ft).
• 1 RCA / RCA (M / M) Cable (1.2 m / 4 ft).
• 1 RCA F / BNC M adapter.
• 1 Set of 19" brackets.
• 1 User's manual.
1-2. GENERAL INFORMATION
The SMART BOOSTER
™
is a Multi-Way 4 x {1 Input to a 3 way Output} Distribution Amplifier for RGB HV,
RGB/S, RGsB, YUV, Computer, Video & HDTV signals.
Each of the 4 Inputs can be split into 3 separately buffered and amplified Outputs. It is the equivalent of integrating in
the same enclosure, 4 different Distribution Amplifiers of 1 to 3 Outputs each.
The SMART BOOSTER
™
splits and boosts any Computer, HDTV and TV sources such as PC, MAC , Laptop, any
Workstation, Line Doubler, Scaler, Video Presenter, Video & Industrial Camera, VCR, DVD, Laser Disc ….
SMART BOOSTER™ Chapter 2 : INSTALLING
PAGE 5
Chapter 2 :
INSTALLING
2-1. TABLE TOP MOUNTING
The SMART BOOSTER
™
can be used directly on a table. The unit is delivered with 4 plastic feet.
2-2. RACK MOUNTING
The SMART BOOSTER
™
is compatible with a 19" enclosure. Please follow the instructions below to install the
SMART BOOSTER
™
into a 19” rack:
• Screw the supplied 19" brackets to the sides of the SMART BOOSTER
™
.
• Put the SMART BOOSTER
™
into the rack.
NOTE: The 19" front panel screws are not included.
• Be sure that no weight is added on the SMART BOOSTER
™
in excess of 2 kg (4.4 lbs.).
• The maximum ambient operating temperature must not exceed 40 °C (104 °F).
• The rack and all mounted equipment in it must be reliably grounded to national and local
electrical codes.
2-3. STARTING
Note : All devices must be OFF before connecting.
c Connect the AC Power Cord to the rear of the SMART BOOSTER
™
and to a power outlet.
d Connect your Video & Computer Sources to the INPUTS.
e Connect your corresponding Video / Data Display Devices (TV, VCR, Data Projector, Plasma Screen, LCD
Screen, ….) or SMART CUT 2
™
to the OUTPUTS (up to 3 for each Input).
f Turn ON your Display Devices and all of your Input Sources.
Chapter 3 : TECHNICAL DESCRIPTION SMART BOOSTER™
PAGE 6
Chapter 3 :
TECHNICAL DESCRIPTION
3-1. FRONT PANEL
POWER: LED Indicator.
3-2. REAR PANEL
POWER INPUT: Standard IEC connector (100-250 VAC, 50-60 Hz, Automatic).
COMPUTER
INPUT: On HD 15 female connector.
OUTPUTS (1→3): On HD 15 female connector.
RGB / YUV / HDTV (Compatible for both Video and Computer Rates).
INPUT: On 3 or 4 BNC female connectors.
OUTPUTS (1→3): On 3 or 4 BNC female connectors.
S.VIDEO – Y/C
INPUT: On 4 pin mini DIN female connector or 2 BNC female connectors.
OUTPUTS (1→3): On 4 pin mini DIN female connector (S.VIDEO 1 & S.VIDEO 2)
On 2 BNC female connectors (S.VIDEO 3).
COMPOSITE VIDEO
INPUT: On 1 BNC female connector.
OUTPUTS (1→3): On 1 BNC female connector.
SMART BOOSTER™ Chapter 4 : TECHNICAL SPECIFICATIONS
PAGE 7
Chapter 4 :
TECHNICAL SPECIFICATIONS
4-1. COMPUTER INPUT(ON HD 15 OR BNC CONNECTORS)
Software compatibility: All software compatible.
Hardware compatibility: PC, MAC , WORKSTATION.
Resolution : From VGA (640 x 480) to UXGA (1600 x 1280).
RGsB, RGBS, RGBHV compatible.
Line Frequency : From 31.5 kHz to 150 kHz.
Frame Rate : From 24 Hz to 170 Hz.
RGB Bandwidth : 300 MHz.
Levels: R, G, B = 0.7 Vp/p.
H & V Sync. = TTL.
COMP Sync. = 0.3 Vp/p or TTL.
SOG = 0.3 Vp/p.
Impedance: 75 Ohms (R, G, B) ; Hi-Z (H & V and COMP Sync.).
4-2. RGB / YUV / HDTV INPUT
Accepts signals from both Computer & Video Sources (RGsB, RGBS, YUV, HDTV Compatible Sync & Rate).
Line Frequency: from 15 kHz to 150 kHz.
Frame Frequency: from 24 Hz to 170 Hz.
Bandwidth: 300 MHz.
• RGsB & RGBS INPUT (ON 3 OR 4 BNC CONNECTORS).
Line Frequency: from 15.625 kHz to 150 kHz.
Levels: R, G, B = 0.7 Vp/p.
COMP SYNC = 0.3 Vp/p or TTL.
SOG = 0.3 Vp/p.
Impedance: R, G, B = 75 Ohms.
• YUV INPUT (ON 3 BNC CONNECTORS).
15.625 kHz / 50 Hz (625 L) .…. 15.735 kHz / 60 Hz (525 L).
Levels: Y = 0.7 Vp/p (Luma) + 0.3 Vp/p (Sync.).
U, V = 0.7 Vp/p.
Impedance: 75 Ohms.
• HDTV INPUT (ON 3 BNC CONNECTORS)
Levels: Y = 0.7 Vp/p with ± 0.3 V Tri-level Sync.
Dr = 0.7 Vp/p (with Tri-level Sync.).
Db = 0.7 Vp/p (with Tri-level Sync.).
RGB = 0.7 Vp/p with ± 0.3 V Tri-level Sync.
Impedance: 75 Ohms.
4-3. S.VIDEO (Y/C) (ON 4 PIN MINI DIN OR 2 BNC FEMALE CONNECTORS)
15.625 kHz / 50 Hz (625 L) ….. 15.735 kHz / 60 Hz (525 L).
Levels: Y = 1 Vp/p (0.7 Vp/p Luma + 0.3 Vp/p Sync.).
C = 0.3 Vp/p (Chroma Burst).
Impedance: 75 Ohms (Chroma & Luma).
Chapter 4 : TECHNICAL SPECIFICATIONS SMART BOOSTER™
PAGE 8
4-4. C.VIDEO (ON 1 BNC FEMALE CONNECTOR)
15.625 kHz / 50 Hz (625 L) ..… 15.735 kHz / 60 Hz (525 L).
Levels: 1 Vp/p (0.7 Vp/p Luma + 0.3 Vp/p Sync.).
Impedance: 75 Ohms.
4-5. COMPUTER & VIDEO OUTPUTS (ON HD 15 AND 1 TO 5 BNC FEMALE CONNECTORS)
RGB, YUV, Luma (Y) & Composite Video = 0.7 Vp/p (75 Ohms).
For HD15 Output : SYNC. = H&V (TTL), COMP.Sync. (TTL), SOG (0.3 Vp/p).
For BNC Output : SYNC. = COMP Sync. (TTL or 0.3 Vp/p), SOG (0.3 Vp/p).
For S.VIDEO & Composite Video Output : SYNC. = 0.3 Vp/p.
4-6. ENVIRONMENTAL
Power Supply: Internal CE / UL / CSA / IEC 950 (25 W), Universal, Automatic.
Input : 100 VAC to 250 VAC ; 50-60 Hz ; I = 0.5 A Max.
Storage Temperature: -25 °C to +85 °C. (-13 °F to +185 °F)
Operating temperature: 0 °C to 50 °C (32 °F to 122 °F)
Maximum ambient operating temperature: < 40 °C (<104 °F)
Hygrometry: 10% to 80% (without condensation).
Dimensions: D 185 x W 440 x H 44 mm / D 7.2" x W 17.3" x H 1.74".
(Compatible with a standard 19" rack, Height = 1 unit).
Weight: 2.3 kg / 5.1 Lbs.
SMART BOOSTER™ Chapter 5 : CONNECTIONS
PAGE 9
Chapter 5 :
CONNECTIONS
5-1. SMART BOOSTER ALONE
COMPUTER
PC/MAC)
VIDEOTAPE
(YUV)
CAMERA
(S.VIDEO)
VCR (C.VIDEO)
DATA
MONITOR
TV
MONITOR
UP TO 3
AC POWER
SUPPLY
TV
MONITOR
TV
MONITOR
UP TO 3
UP TO 3
UP TO 3
Chapter 5 : CONNECTIONS SMART BOOSTER™
PAGE 10
5-2. SMART BOOSTER WITH SMART-CUT 2
SMART BOOSTER™
PAGE 11
WARRANTY
Analog Way warrants the product against any defects in materials and workmanship for a period of three years from the date of
purchase (back à the factory).
In the event of any malfunction during the warranty period, Analog Way will, at its option, repair or replace the defective units,
including free materials and labor.
This warranty does not apply if the product has been :
- improperly installed or abused,
- handled with improper care,
- used or stocked in abnormal conditions,
- modified, opened,
- damaged by fire, war, or Natural disasters (Acts of God).
In no way shall Analog Way be responsable for direct or indirect loss of profit or consequential damages resulting from any
defect in this product.
In case of any problem, get the serial number of the unit, a description of the problem, and then call your authorized dealer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Analog way SMART BOOSTER SMB413 User manual

Analog way
Brand
Analog way
Model
SMART BOOSTER SMB413
Category
Video switches
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents