magnadyne.com
Wall Mount USB / 12V Power Outlet
Models: WC-12V-B and WC-12V-W (Rev. D)
Models: WCP-12V-B and WCP-12V-W
Operation Instructions
© 2019 Copyright Magnadyne Corporation
USB Charging Ports
Power Indicator
Do not insert any metal objects into
the sockets as fire or electrical shock
may occur.
USB Charging:
USB ports are capable of charging 2 devices simultaneously.
Charges most USB powered devices: i-series devices, smart phones,
Mp3 players and USB powered devices.
Inserting a USB Cable:
Gently insert the USB drive into the slot.
Note 1: If a USB connector does not insert, DO NOT FORCE it into the
slot, flip the connector over and try again.
Removing a USB Cable:
Pull the USB connector straight out of the socket. Do not pull the USB’s
cable to remove the USB connector from its socket. Damage may occur.
12V Power Socket (APO)
Warnings Introduction Power Indicator
The green LED illuminates when the
outlet has power.
Inserting a VPA:
Insert the VPA into the socket making sure to fully insert the charger.
Removing a VPA:
To remove the charger pull the VPA charger out of the socket. Do not
pull the vpa’s cable to remove the charger.
DO NOT USE CIGARETTE
LIGHTERS WITH THIS UNIT.
WC-12V-IMUM Rev. G 10-08-19
The WC-12V-B/W USB Charger offers two
USB charging ports and an automotive
power outlet (APO). The WC-12V-B/W USB
outlet is able to charge most current
electronic devices, two at a time, including
smart phones, tablets, cameras, e-readers
and MP3 players.
Specifications:
Automotive Power Outlet Output Rating: 12VDC, 15A
Charging Output Rating:
USB #1: 5V3A/9V2A/12V1.5A
USB #2: 5V2.4A
Wire Terminals: #16 AWG
Working Temperature: 32˚ to 104˚F (0 to 40˚C)
USB Connector Compatibility: USB-A
Type 1.1/2.0/3.0 devices
Maximum Power Consumption: 120 watts