Magnadyne WC-USBHD-B Operating instructions

Magnadyne
Brand
Magnadyne
Model
WC-USBHD-B
Type
Operating instructions

This manual is also suitable for

Magnadyne WC-USBHD-B is a wall mount USB and HDMI pass-through outlet that allows you to charge devices and connect them to your TV. The USB ports can charge two devices simultaneously at 2 Amps each, making it ideal for charging phones, tablets, and other USB-powered devices. The HDMI pass-through allows you to connect your devices to your TV without the need for additional cables. The outlet is designed for continuous operation and includes a green LED power indicator. It is easy to install and use, making it a great addition to any home or office.

Magnadyne WC-USBHD-B is a wall mount USB and HDMI pass-through outlet that allows you to charge devices and connect them to your TV. The USB ports can charge two devices simultaneously at 2 Amps each, making it ideal for charging phones, tablets, and other USB-powered devices. The HDMI pass-through allows you to connect your devices to your TV without the need for additional cables. The outlet is designed for continuous operation and includes a green LED power indicator. It is easy to install and use, making it a great addition to any home or office.

Wall Mount USB / HDMI Pass Thru Outlet
Models: WC-USBHD-B and WC-USBHD-W
Installation Instructions
WC-USBHD-X-INS Rev. A 10-20-14
© 2014 Copyright Magnadyne Corporation
Installation
Black Wire with Red Stripe
Connect to a 12V power source.
TV
HDMI Female/Female Pass Through
(side view)
HDMI cable
connect toTV
(cable not included)
HDMI cable
connect to device
(cable not included)
Warnings
•
ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY
VOID THE USER’S AUTHORITY TO OPERATE IT.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INSTALL THE
UNIT IN A PLACE EXPOSED TO DIRECT SUNLIGHT OR EXCESSIVE HEAT OR
HUMIDITY. AVOID PLACES WITH TOO MUCH DUST OR THE POSSIBILITY OF
WATER SPLASHING OR GETTING WET.
• THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
• IN CERTAIN VEHICLES THE
ADAPTER WILL DRAW POWER EVEN WHEN VEHICLE
IS TURNED OFF AND DEPENDING ON USAGE MAY DRAIN THE VEHICLE’S BATTERY
.
•
Use the proper power supply. This product is designed for operation with a neg-
ative grounded 12V DC battery system. If the product is used with the improper
system it may cause a fire or an accident.
• This product must be installed and used in accordance with this installation
instructions. Any alterations to this product that enables it to be used in any way
other than intended or designed could result in an accident causing injury or death.
Magnadyne Corporation disclaims any and all liability that may result from failure
to install and operate in any other manner in which this unit was intended.
•
Do not disassemble, modify the unit or attempt to repair the product yourself. If
the product needs to be repaired, consult your dealer.
Caution
1
1
/4”
2
3
/4”
Template
Patent Pending
Black Wire
Connect to chassis ground.
Faceplate
(Not Supplied)
Faceplate Screws
(Not Supplied)
Mounting Screws
(Not Supplied)
+12 Volt
Ground
Wall Mount USB / HDMI Pass Thru Outlet
Models: WC-USBHD-B and WC-USBHD-W
Operation Instructions
© 2014 Copyright Magnadyne Corporation
USB Charging Ports
Power Indicator
Do not insert any metal objects into
the sockets as fire or electrical shock
may occur.
USB Charging:
USB ports are capable of charging at 2 Amps simultaneously. Charge
most USB powered devices: i-series devices, smart phones, Mp3
players and USB powered devices.
Inserting a USB Cable:
Gently insert the USB drive into the slot.
Note 1: If a USB connector does not insert, DO NOT FORCE it into the
slot, flip the connector over and try again.
Removing a USB Cable:
Pull the USB connector straight out of the socket. Do not pull the USB’s
cable to remove the USB connector from its socket. Damage may occur.
HDMI Female/Female Pass Thru
Warnings Power Indicator
The green LED illuminates when the
outlet has power.
HDMI Socket Accepts Standard Male HDMI Plug
Gently insert the HDMI connector into the slot.
Note 1: If connector does not insert, DO NOT FORCE it into the slot, flip
the connector over and try again.
Removing HDMI Connector:
Pull the HDMI connector straight out of the socket. Do not pull the
HDMI cable to remove the HDMI connector from its socket. Damage
may occur.
WC-USBHD-X-INS Rev. A 10-20-14
Patent Pending
  • Page 1 1
  • Page 2 2

Magnadyne WC-USBHD-B Operating instructions

Magnadyne
Brand
Magnadyne
Model
WC-USBHD-B
Type
Operating instructions
This manual is also suitable for

Magnadyne WC-USBHD-B is a wall mount USB and HDMI pass-through outlet that allows you to charge devices and connect them to your TV. The USB ports can charge two devices simultaneously at 2 Amps each, making it ideal for charging phones, tablets, and other USB-powered devices. The HDMI pass-through allows you to connect your devices to your TV without the need for additional cables. The outlet is designed for continuous operation and includes a green LED power indicator. It is easy to install and use, making it a great addition to any home or office.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents