ADLINK Technology AmITX-HL-G User manual

AmITX-HL-G

User’s Manual

Mini-ITX Motherboard with

4th Gen Intel

®

Core™ i7/i5/i3 Processor

and Intel

®

Q87/H81 Chipset

Manual Revision: 1.00

Revision Date: November 24, 2015

Part Number: 50-1X012-1000

Page 2 AmITX-HL-G

Revision History

Revision Description Date By

1.00 Initial release 2015-11-24 JC

AmITX-HL-G Page 3

Preface

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by

any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not

represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such

damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's

Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and

raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to

dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

AmITX-HL-G is a RoHS compliant and leadfree product

Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their

respective companies.

Page 4 AmITX-HL-G

Table of Contents

Revision History ............................................................................................................ 2

Preface............................................................................................................................ 3

1. Introduction .......................................................................................................... 7

1.1. Packing List ............................................................................................................................7

1.2. Optional Accessories .............................................................................................................7

2. Specifications........................................................................................................ 8

2.1. Core System...........................................................................................................................8

2.2. Rear I/O Connectors ..............................................................................................................8

2.3. Internal Headers and Connectors..........................................................................................8

2.4. Form Factor ...........................................................................................................................9

2.5. SEMA Board Controller..........................................................................................................9

2.6. Debug Header........................................................................................................................9

2.7. Video......................................................................................................................................9

2.8. Audio......................................................................................................................................9

2.9. LAN.........................................................................................................................................9

2.10. Trusted Platform Module (TPM) ...........................................................................................9

2.11. Power Specification ............................................................................................................ 10

2.12. Temperatures ..................................................................................................................... 10

2.13. Environmental .................................................................................................................... 10

2.14. Operating Systems.............................................................................................................. 10

2.15. Power Consumption ........................................................................................................... 11

2.16. Functional Diagram............................................................................................................. 13

3. Mechanical Layout .............................................................................................

14

3.1. Connector Locations ........................................................................................................... 14

3.2. Mechanical Dimensions...................................................................................................... 15

3.3. Thermal Solutions............................................................................................................... 17

4. Connectors and Jumpers ................................................................................... 18

4.1. Rear IO Connectors............................................................................................................. 18

4.1.1. DisplayPort ........................................................................................................................................18

4.1.2. USB Connectors.................................................................................................................................18

4.1.3. Ethernet Connectors (LAN1, LAN2) ...................................................................................................19

4.1.4. Audio Connectors ..............................................................................................................................19

4.2. Internal Connectors ............................................................................................................ 20

4.2.1. ATX Power Connector (ATX_PWR, proprietary) ................................................................................20

4.2.2. SATA Connectors (SATA0/1/2) ..........................................................................................................21

AmITX-HL-G Page 5

4.2.3. SATA Power Connector (ST_PWR1/2) ...............................................................................................21

4.2.4. USB Header........................................................................................................................................22

4.2.5. PS/2 Keyboard and Mouse Connector ..............................................................................................23

4.2.6. Internal Audio Connector ..................................................................................................................23

4.2.7. CPU Fan and System Fan Connectors................................................................................................24

4.2.8. Serial COM Port Connectors..............................................................................................................24

4.2.9. LVDS Connector.................................................................................................................................26

4.2.10. LVDS Auxiliary Connector ................................................................................................................27

4.2.11. Front Panel Connector.....................................................................................................................28

4.2.12. Feature Connector...........................................................................................................................29

4.2.13. SPI Header .......................................................................................................................................30

4.2.14. DB40 Debug Board Connector.........................................................................................................31

4.3. Jumper and Switch Settings................................................................................................ 32

4.3.1. Jumper and Switch Locations ............................................................................................................32

4.3.2. ATX/AT Mode Selection (JPATX)........................................................................................................32

4.3.3. Clear CMOS (CMOS) ..........................................................................................................................32

4.3.4. Mini-PCE/mSATA Selection (JPMSATA) .............................................................................................33

4.3.5. COM Port (SER1) Power Selection (JPS3P) ........................................................................................33

4.3.6. LVDS Backlight Power Selection (JPL1)..............................................................................................33

4.3.7. LVDS Panel Power Selection (JPL2)....................................................................................................33

4.3.8. LVDS Backlight Enable Selection (JPL3) .............................................................................................33

4.3.9. BIOS Switch Setting (SW2, SW3)........................................................................................................34

4.4. Onboard Connector Information........................................................................................ 35

5. Driver Installation............................................................................................... 36

6. Smart Embedded Management Agent (SEMA) ..............................................

37

6.1. Board Specific SEMA Functions .......................................................................................... 37

6.1.1. Voltages.............................................................................................................................................37

6.1.2. Main Current .....................................................................................................................................38

6.1.3. BMC Status ........................................................................................................................................38

6.1.4. Exception Codes ................................................................................................................................38

6.1.5. BMC Flags ..........................................................................................................................................39

7. System Resources............................................................................................... 40

7.1. System Memory Map ......................................................................................................... 40

7.2. Direct Memory Access Channels ........................................................................................ 40

7.3. I/O Map............................................................................................................................... 40

7.3.1. I/O Map .............................................................................................................................................40

7.3.2. IRQ Lines PIC mode............................................................................................................................42

7.3.3. IRQ Lines APIC mode .........................................................................................................................43

Page 6 AmITX-HL-G

7.4. PCI Configuration Space Map ............................................................................................. 44

7.5. PCI Interrupt Routing Map.................................................................................................. 45

7.6. SMBus Slave Address.......................................................................................................... 45

8. BIOS Setup .......................................................................................................... 46

8.1. Menu Structure................................................................................................................... 46

8.2. Main.................................................................................................................................... 47

8.2.1. System Information ...........................................................................................................................47

8.2.2. Processor Information.......................................................................................................................47

8.2.3. PCH Information ................................................................................................................................47

8.2.4. System Management.........................................................................................................................48

8.2.5. System Date and Time.......................................................................................................................52

8.3. Advanced ............................................................................................................................ 52

8.3.1. CPU ....................................................................................................................................................52

8.3.2. Audio .................................................................................................................................................53

8.3.3. SATA ..................................................................................................................................................53

8.3.4. Thermal .............................................................................................................................................54

8.3.5. Memory .............................................................................................................................................54

8.3.6. Graphics.............................................................................................................................................55

8.3.7. USB ....................................................................................................................................................57

8.3.8. ACPI and Power Management...........................................................................................................57

8.3.9. PCI and PCIe.......................................................................................................................................58

8.3.10. Super IO...........................................................................................................................................59

8.3.11. Serial Port Console ..........................................................................................................................59

8.3.12. Network...........................................................................................................................................60

8.3.13. Security............................................................................................................................................61

8.3.14. Miscellaneous..................................................................................................................................61

8.4. Boot .................................................................................................................................... 62

8.4.1. Boot Configuration ............................................................................................................................62

8.5. Security ............................................................................................................................... 63

8.5.1. Password Description ........................................................................................................................63

8.6. Save & Exit .......................................................................................................................... 63

Safety Instructions ...................................................................................................... 64

Getting Service ............................................................................................................ 65

AmITX-HL-G Page 7

1. Introduction

The AmITX-HL-G is a Mini-ITX motherboard supporting the Desktop 4

th

Generation Intel

®

Core™ i7/i5/i3 and Pentium

®

/Celeron

®

Processor

with Intel

®

Q87/H81 Chipset. The AmITX-HL-G is specifically designed for customers who need high-level processing and graphics

performance with a long product life solution.

The AmITX-HL-G features three DisplayPorts, dual Gigabit Ethernet ports, USB 3.0 ports, USB 2.0 ports, SATA 6 Gb/s ports, and High

Definition Audio with 7.1 channels. Expansion is provided by one PCIe x16, one PCIe x1, and two mini-PCIe slots. The onboard feature

connector provides GPIO, SMBus, and I

2

C support. The board is equipped with SPI AMI EFI BIOS, supporting embedded features such as

hardware monitor and watchdog timer.

Available Models

Model Number Chipset

AmITX-HL-G-Q87 Q87

AmITX-HL-G-H81 H81

Latest revision of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage:

http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1446.

1.1. Packing List

• AmITX-HL-G Mini-ITX motherboard

• ATX/AT power cable (P/N: 30-20872-0000)

• SATA dual power cable (P/N: 30-20875-0000)

• SATA cable (P/N: 30-10057-0600)

• Rear I/O shield (P/N: 34-25314-0000 )

1.2. Optional Accessories

• COM port cable, 1 port (P/N: 30-20876-0000)

• PS/2 KB/MS cable (P/N: 30-20873-0000)

• USB 2.0 cable, 2 ports (P/N: 30-20874-1000)

Page 8 AmITX-HL-G

2. Specifications

2.1. Core System

¾ CPU: Desktop 4th Generation Intel® Core™ i7/i5/i3 and Pentium®/Celeron® Processor, Socket H3, LGA1150 package

• Core™ i7-4770S Processor, 3.1 GHz, 4C, 65W

• Core™ i7-4770TE Processor, 2.3GHz, 4C, 45W

• Core™ i5-4570S Processor, 2.9 GHz, 4C, 65W

• Core™ i5-4570TE Processor, 2.7 GHz, 2C, 35W

• Core™ i3-4330 Processor, 3.5 GHz, 2C, 54W

• Core™ i3-4330TE Processor, 2.4 GHz, 2C, 35 W

• Pentium® G3420 Processor, 3.2GHz, 2C, 3M, 54W

• Pentium® G3320TE Processor, 2.3GHz, 2C, 3M, 35W

• Celeron® G1820 Processor, 2.7GHz, 2C, 2M, 54W

• Celeron® G1820TE Processor, 2.2GHz, 2C, 2M, 35W

“Haswell Refresh”

• Core™ i7-4790S Processor, 3.2GHz, 4C, 8M, 65W

• Core™ i5-4590S Processor, 3.0GHz, 4C, 4M, 65W

• Core™ i3-4360 Processor, 3.7GHz, 2C, 4M, 54W

• Core™ i3-4350T Processor, 3.1GHz, 2C, 4M, 35W

¾ Chipset: Intel® Q87/H81 Chipset

¾ Memory: Dual channel non-ECC 1333/1600 MHz DDR3/DDR3L(1.5V support) memory up to 16GB in dual stacked SODIMM sockets

¾ Embedded BIOS: AMI EFI in 16MB/8MB(Q87/H81) SPI BIOS

2.2. Rear I/O Connectors

¾ Display: 3x DisplayPort

¾ LAN: Dual GbE RJ-45

¾ USB: 4x USB 3.0, 4x USB 2.0 (Q87); 2x USB 3.0, 6x USB 2.0 (H81)

¾ Audio: 7.1 channel audio via 5 jacks and S/PDIF output on rear I/O

2.3. Internal Headers and Connectors

¾ PCI Express: PCIe x16 (Gen3), PCIe x1 (Gen2)

¾ 2x Mini PCIe: one PCIe+USB (top side); one PCIe+USB or mSATA by jumper setting (bottom side)

¾ USB: 2x USB 2.0 via onboard header, 2x USB 2.0 via front panel connector, one vertical USB 2.0 port

¾ SATA: 3x SATA ports (Q87 supports 3x SATA 6 Gb/s, H81 supports 2x SATA 6 Gb/s, 1x SATA 3 Gb/s)

¾ SATA Power Connector

¾ Serial: 3x RS-232 headers, 1x RS-232/422/485 headers with 5V power (12V by BOM option)

¾ LVDS (optional): Supports non-EDID type LCD panels only

¾ Front Panel Header

¾ Audio Header

¾ Feature Connector Header

AmITX-HL-G Page 9

¾ PS/2 KB/MS Connector

¾ SPI Header

¾ ATX Power Connector

2.4. Form Factor

¾ Mini-ITX: 170mm x 170mm

2.5. SEMA Board Controller

¾ ADLINK Smart Embedded Management Agent (SEMA)

• Voltage/Current monitoring

• Power sequence debug support

• AT/ATX mode control

• Logistics and Forensic information

• Flat Panel Control

• General Purpose I2C

• Failsafe BIOS (dual BIOS )

• Watchdog Timer and Fan Control

2.6. Debug Header

¾ 40-pin Multipurpose Flat Cable Connector:, used in combination with DB-40 debug module providing BIOS POST code LED, BMC

access, SPI BIOS flashing, Power Testpoints, Debug LEDs

2.7. Video

¾ GPU Feature Support

• Intel® HD Graphics 4600 supports DirectX11.1, OpenGL 3.2 and OpenCL 1.2; triple simultaneous display output on Q87 and dual

simultaneous display output on H81

¾ Display Interface support

• 3x DisplayPort v1.2 with resolution up to 3840 x 2160 @ 60Hz

• LVDS (optional): Supports non-EDID type LCD panels only; Single/Dual Channel 18 and 24-bit; 1920 x 1200 @ 60 Hz resolution in

dual LVDS bus mode

2.8. Audio

¾ Integrated: Intel® HD Audio on chipset

¾ Audio Codec: ALC886

2.9. LAN

¾ Intel PHY: Intel® i218LM (PHY) Ethernet controller

• Supports Intel® AMT 9.0 on Q87

• Supports Intel® vPro™ on Q87

¾ Intel MAC/PHY: Intel® i211AT (MAC/PHY) Ethernet controller

¾ Interface: 10/100/1000 GbE connection

2.10. Trusted Platform Module (TPM)

¾ Chipset: Atmel AT97SC3204 (optional)

¾ Type: TPM1.2

Page 10 AmITX-HL-G

2.11. Power Specification

¾ Power Modes: AT and ATX mode (AT mode start controlled by BMC)

¾ Standard Voltage Input: ATX = 12V ±5%, 5Vsb ±5% or AT = 12V ±5%

¾ Power Management: ACPI 4.0 compliant

¾ Power States: Supports C1-C6, S0, S1, S4, S3, S5, (Wake-on-USB S3/S4, WoL S3/S4/S5)

2.12. Temperatures

¾ Operating Temperature: 0°C to 60°C

¾ Storage Temperature: -20°C to 80°C

2.13. Environmental

¾ Humidity: 10-90% RH operating, non-condensing

5-95% RH storage (and operating with conformal coating)

¾ Shock and Vibration: IEC 60068-2-64 and IEC-60068-2-27

MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D

¾ HALT: Thermal Stress, Vibration Stress, Thermal Shock and Combined Test

2.14. Operating Systems

¾ Standard Support: Windows 7/8 32/64-bit, Linux 32/64-bit

¾ Extended Support (BSP): WES7, WE8S, Linux, VxWorks

AmITX-HL-G Page 11

2.15. Power Consumption

System Configuration

Memory Slot1 Kingston 8G KVR16LS11/8 DDR3L SODIMM (1600MHZ)

Memory Slot2 Kingston 8G KVR16LS11/8 DDR3L SODIMM (1600MHZ)

Graphics Intel® HD Graphics 4600

HDD ADLink ASD26-MT1064-CT SSD 64GB

Monitor Hanns.G HZ222

Cooler CoolJag JYC9L06AGC-A

Power Supply FSP Group INC. FSP600-80PSA 600W

Video Resolution 1920 x 1080 x32bit

BIOS 1.06

FW 2v0

Utility PassMark BurnInTest 7.1

¾ Intel® Core™ i7-4770S 3.1GHz (65W)

BIOS EIST/C-state Enabled BIOS EIST/C-state Disabled

Power State

Current (A)/Voltage (V) Power (W) Current (A)/Voltage (V) Power (W)

S1(1) N/A N/A

S3 0.29/5.01 1.45

S5(2) 0.21/5.01 1.05

Windows 7 (Idle) 1.22/12.05 14.70 1.37/12.13 16.62

Windows 7 (Typical) 5.21/12.02 62.62 4.32/12.06 52.10

Windows 7 (Max loading) 7.56/11.96 90.42 7.41/11.96 88.62

Notes: (1) ACPI/S1 mode not supported by BIOS.

(2) ECO mode not supported by BIOS.

¾ Intel® Core™ i5-4570S Processor 2.9GHz (65W)

BIOS EIST/C-state Enabled BIOS EIST/C-state Disabled

Power State

Current (A)/Voltage (V) Power (W) Current (A)/Voltage (V) Power (W)

S1(1) N/A N/A

S3 0.23/5.01 1.15

S5(2) 0.16/5.01 0.80

Windows 7 (Idle) 1.18/12.05 14.22 1.32/12.09 15.96

Windows 7 (Typical) 3.63/12.06 43.78 3.25/12.08 39.26

Windows 7 (Max loading) 7.27/11.96 86.95 6.66/11.97 79.72

Notes: (1) ACPI/S1 mode not supported by BIOS.

(2) ECO mode not supported by BIOS.

Page 12 AmITX-HL-G

¾ Intel® Core™ i3-4330 Processor 3.5GHz (54W)

BIOS EIST/C-state Enabled BIOS EIST/C-state Disabled

Power State

Current (A)/Voltage (V) Power (W) Current (A)/Voltage (V) Power (W)

S1(1) N/A N/A

S3

0.18/5.06 0.91

S5(2)

0.14/5.06 0.71

Windows 7 (Idle)

1.08/12.1 13.07 1.18/12.1 14.28

Windows 7 (Typical)

3.62/12.09 43.77 3.13/12.16 38.06

Windows 7 (Max loading) 6.04/12.09 73.02 5.92/12.04 71.28`

Notes: (1) ACPI/S1 mode not supported by BIOS.

(2) ECO mode not supported by BIOS.

¾ Intel® Pentium® Processor G3420 3.2GHz (53W)

BIOS EIST/C-state Enabled BIOS EIST/C-state Disabled

Power State

Current (A)/Voltage (V) Power (W) Current (A)/Voltage (V) Power (W)

S1(1) N/A N/A

S3

0.18/5.06 0.91

S5(2)

0.17/5.06 0.86

Windows 7 (Idle)

1.07/12.1 12.95 1.17/12.1 14.16

Windows 7 (Typical)

2.52/12.18 30.69 2.43/12.18 29.6

Windows 7 (Max loading) 4.73/12.08 57.14 4.75/12.08 57.38

Notes: (1) ACPI/S1 mode not supported by BIOS.

(2) ECO mode not supported by BIOS.

AmITX-HL-G Page 13

2.16. Functional Diagram

USB

USB Vertical

DP

USB3.0*

PS/2

SPI0/1 header

Optional

DisplayPort B

BMC

Intel® Q87/H81

Chipset

Super I/O

ITE

IT8783

4

th

Gen Intel®

Core™ i7/i5/i3

Pentium®

Celeron®

Socket H3 Socket

LGA1150

USB3.0

1x SATA 6Gb/s Q87 [SATA 3Gb/s H81] port 2

LPC

2x SATA 6Gb/s port 0/1

FDI

DMI

Vertical SODIMM (channel A)

8 GB DDR3/DDR3L(supports 1.5V)

at 1333/1600 (

non ECC)

SATA SATA

Front Panel

2x USB 2.0 port 8/9

SMbus

GPIO

Sensor

CPU Fan

Feature Connector

System Signals

SPI 0/1

SPI0 SPI1 socket

SPI0

GPIO

Failsafe

switch

System Fan1

Rear I/O Connectors Internal Connectors Functional Components

SATA

System Signals

PCIe x1 port 1

PCIe x1 slot

DisplayPort D

USB 3.0 port 0/1

Q87: 2x USB 3.0 port 4/5

*[H81: 2x USB 2.0]

USB2.0

DisplayPort C

GbE i218LM

RJ45

10/100/1000

top

PCIe port 6

RJ45

10/100/1000

bottom

GbE i211AT

PCIe port 5

HDA

Codec

ALC886

Center Line IN

Surround L/R Line Out

SPDIF Out Mic IN

Audio Header

COM1 Header

COM2 Header

COM3 Header

COM4 Header

1x RS-232/422/485

mSATA/

Mini PCIe

full size, bottom

Mini PCIe

half size

top

USB 2.0 port 3

USB

Hub

x4

USB 2.0

Switch

1x SATA 6Gb/s Q87 port 3

[1x SATA 3Gb/s H81]

USB 2.0 port 10/11

MIC2-IN / LINE2 / AGND

USB

HUB

x4

1x USB 2.0 port 2

USB 2.0

PCIe x1 port 3

Temp input for System Fan

PCIe x1 port 4

System Fan2

TPM

Atmel

eDP to

LVDS

eDP

2 lane

LVDS

Fine Wire Conn.

LVDS control

LVDS AUX

Connector

DDC

Brightness

LVDS Dat/Clk

PCIe x16

PCIe x16 slot

3x RS-232

USB2.0

4x USB 2.0

Vertical SODIMM (channel B)

8 GB DDR3/DDR3L(supports 1.5V)

at 1333/1600 (

non ECC)

Page 14 AmITX-HL-G

3. Mechanical Layout

3.1. Connector Locations

DP

LAN

USB

DP

USB

DP

USB

Audio

Front Panel Connector

2x SODIMM

ATX/AT Power

Feature Connector

LVDS

Mini PCIe

USB Vertical Connector

SATA Connectors

Audio Header

PCIe x1

PCIe x16

SPI Header

USB 2.0

SPI Socket

DB40 Connector

PS/2 KB/MS

3x RS-232

1x RS-232/422/485

System Fans

LVDS AUX

CPU Fan

SATA Power

AmITX-HL-G Page 15

3.2. Mechanical Dimensions

Top View

Dimensions: mm

All tolerances ±0.2mm

Page 16 AmITX-HL-G

Side View

Dimensions: mm

All tolerances ±0.2mm

AmITX-HL-G Page 17

3.3. Thermal Solutions

LGA1150 CPU Cooler, H=30.0mm, 45W

Standard Temp.: 0°C to 60°C

P/N: 32-20513-0000

LGA1150 CPU Cooler, H=46.05mm, 45W

Standard Temp.: 0°C to 60°C

P/N: 32-20512-0000

LGA1150 CPU Cooler, H=50.2mm, 95W

Standard Temp.: 0°C to 60°C

P/N: 32-20113-0000

LGA1150 CPU Cooler, H=61.4mm, 95W

Standard Temp.: 0°C to 60°C

P/N: 32-20495-0000

Page 18 AmITX-HL-G

4. Connectors and Jumpers

See 3.1 Connector Locations on page 14 for connector locations.

4.1. Rear IO Connectors

4.1.1. DisplayPort

Three DisplayPort v1.2 specification ports up to 3840x2160 @ 60 Hz.

Pin # Signal Pin # Signal

1 CN_DP0_P 2 Ground

3 CN_DP0_N 4 CN_DP1_P

5 Ground 6 CN_DP1_N

7 CN_DP2_P 8 Ground

9 CN_DP2_N 10 CN_DP3_P

11 Ground 12 CN_DP3_N

13 CN_CAD-L 14 CN_CEC

15 CN_AUX_P 16 Ground

17 CN_AUX_N 18 DDP_HPD

19 Ground 20 P3V3

4.1.2. USB Connectors

Q87: 4x USB 3.0, 4x USB 2.0 [H81: 2x USB 3.0, 6x USB 2.0]

 5V supply for external devices;

 5Vsb is supplied during power down to allow wakeup on USB device activity during S3~S4 state

 1.5A for device power supply protected by a resettable 2A fuse

Pin # Signal

1 Vcc

2 UV0-

3 UV0+

4 GND

Pin # Signal

1 USB3.0_P5VA

2 USB2_CMAN

3 USB2_CMAP

4 GND

5 USB3A_CMRXN

6 USB3A_CMRXP

7 GND

8 USB3A_CMTXN

9 USB3A_CMTXP

1

2

19

20

AmITX-HL-G Page 19

4.1.3. Ethernet Connectors (LAN1, LAN2)

Dual 10/100/1000Mbit/s LAN Ethernet controllers based on Intel® i218LM/i211AT, support PXE and WOL over both LANs.

Pin # 10BASE-T/100BASE-TX 1000BASE-T

1 TX+ LAN_MDI0+

2 TX- LAN_MDI0-

3 RX+ LAN_MDI1+

4 -- LAN_MDI2+

5 -- LAN_MDI2-

6 RX- LAN_MDI1-

7 -- LAN_MDI3+

8 -- LAN_MDI3-

LED1 (Speed) LED2 (Link/Activity)

Status Description Status Description

Off 10 Mb connection Off No Link

Green 100 Mb connection Orange Linked

Orange 1 Gb connection Blinking Data Activity

4.1.4. Audio Connectors

 7.1 channel audio via 5 jacks and S/PDIF output on rear I/O

 Intel® High Definition Audio on chipset

 Realtek ALC886 codec

Page 20 AmITX-HL-G

4.2. Internal Connectors

4.2.1. ATX Power Connector (ATX_PWR, proprietary)

AmITX-HL-G supports a proprietary internal ATX Power Connector (ATX_PWR). An adapter cable is provided for connection to a standard

ATX power supply.

Pin # Signal Pin # Signal

1 SB5V 8 P_OK

2 GND 9 PS_ON#

3 GND 10 +12V

4 GND 11 +12V

5 GND 12 +12V

6 GND 13 +12V

7 3.3V 14 +5V

ATX Adapter Cable: ADLINK Part. No. 30-20872-0000 (length 250 mm)

Motherboard

ATX Power

Connector

(ATX_PWR)

ATX Power

Supply

Page is loading ...

ADLINK Technology AmITX-HL-G User manual

ADLINK Technology AmITX-HL-G User manual

Related papers

Other documents