Page is loading ...
TBS25
The CE declaration of conformity can be requested at info@telecogroup.com
TELECO s.p.a
Via Ettore Majorana, 49 - 48022 LUGO (RA)
Tel. +39 0545 25037 - Fax. +39 0545 32064
4 di 4
TBS25
1 TBS25 Bluetooth loudspeaker
All new LED TVs, because of their ultra-flat design, have small speakers and they
don’t always put out the audio levels needed to ensure optimal clarity. This Blue-
tooth loudspeaker, linked to the Teleco TB25 mini-transmitter, provides an ideal
wireless connection to your TV to give audio volume a welcome boost. Moreover,
the TBS25 is a multi-function Bluetooth loudspeaker. This means it can be paired
with a Bluetooth music source or smartphone, letting you take calls in hands-free
mode.
1.1 Description of TBS25 controls
Figure 1: TBS25 controls
1. Keep pressed to switch the TBS25 on/off. Press briefly to select source;
2. Keep pressed to lower the volume. Press briefly to go to previous trac k;
3. Keep pressed to increase the volume. Press briefly to go to next track;
4. USB memory housing;
5. Micro USB battery charge connector;
6. Micro USB battery charge connector;
7. AUX input;
8. Status LED.
1 di 4
TBS25
1.2 TBS25 Bluetooth pairing
First pairing
Enable Bluetooth on the device you wish to pair (smartphone, TV, etc.) with the
TBS25 loudspeaker and switch on the TBS25. The LED flashes rapidly. Select
the TBS25 from the available Bluetooth devices listed on the smartphone, TV
or other compatible device. If a password is requested, type 0000. If pairing is
successful the status LED flashes slowly. (flashing inter val about 1 second)
Subsequent pairings
If the Bluetooth function on the device you wish to pair is enabled, pairing will
occur automatically when the TBS25 loudspeaker is switched on.
1.3 USB or Micro SD memory
Switch on the TBS25 loudspeaker and insert the USB or Micro SD memory. Audio
files in the memory will be played automatically. While they are playing, buttons
2 and 3 can be used to skip to the next or previous track. If the USB or Micro
SD memory is removed while files are being played the TBS25 will switch to FM
Radio mode.
1.4 AUX Input
Switch on the TBS25 loudspeaker and insert the jack in the AUX input; the TBS25
loudspeaker will now play audio from the source connected to the AUX input.
When the TBS25 loudspeaker is switched on it starts reproducing from the last
source to which it was connected before it was switched off.
2 Charging the battery
When the battery charge expires (after about 5 hours of operation at maximum
volume), charge the battery by connecting the TBS25 loudspeaker to the micro
USB connector on the back via the supplied USB cable. During charging the LED
is red. It takes about 5-6 hours to fully charge the battery.
2 di 4
TBS25
3 Specifiche
• Bluetooth 3.0+EDR loudspeaker
• Output 2X3W
• Loudspeaker dimensions 3.81 cm
• USB/Micro SD/AUX inputs
• 3.7 V/1200mAh lithium ion battery
• Battery duration 4-5 hours
at maximum volume
• Charge time 5-6 hour s
• USB charge connector
• Impedance 4 ohm
• Power supply 5 V DC
• Maximum range 10 metres
3 di 4
/