Teleco Telesat BT User manual

Brand: Teleco

Model: Telesat BT

Type: User manual

TeleSat BT

INSTALLATION GUIDE AND USER MANUAL

Telesat BT 65 - Telesat BT 85

Telesat BT Smart 65 - Telesat BT Smart 85

Automatic antenna for satellite TV reception

Translation of the original instructions

Rev. 001 - 03/2020

The original version of this manual was written in Italian. The Manufacturer cannot be held liable for

any translation errors in other language versions.

This manual has been drawn up by the Manufacturer to provide essential information and instruc-

tions in order to perform all operations for maintenance and use of the machine correctly and safely.

The manual is an integral part of the machine’s accessories. It must be kept carefully for the entire

working life of the machine and must be protected against any damage.

The manual must accompany the machine if it is re-installed in a new vehicle or a change of own-

ership occurs.

The information contained in this manual is intended for personnel who will install the machine and

all persons involved in its maintenance and usage.

The manual denes the purpose for which the machine is designed and contains all the information

necessary to ensure its safe and correct use.

Constant observance of the information contained in it will ensure user safety, low running costs

and a longer machine service life.

For ease of reference, the manual has been divided into sections covering the main topics. Use the

descriptive index to browse the various topics quickly.

Read the manual and reference documents carefully; this is essential to ensure the automatic

antenna works properly and remains reliable over time and to prevent any damage or injury to

property or persons.

The drawings in this manual are provided for illustrative purposes only. Although the machine in

your possession may dier in some details from the illustrations contained in this manual, the safety

and accuracy of the information are nevertheless guaranteed.

“Safety symbols” are used in this document to identify various hazard levels or important informa-

tion:

- 2 - Rev.001Telesat BT

Information to prevent a potentially dangerous situation that could cause serious

injury or damage health.

Information to prevent a situation that could potentially cause damage to objects.

Important information for proper execution of the tasks described or correct use of the ma-

chine.

Before carrying out any work on the device, read this manual carefully and make sure

you have understood its contents.

Before starting work, wear personal protective equipment (goggles, gloves, dust

masks, etc.) suitable for the type of work you intend to perform.

 The machine must be installed solely and exclusively by qualied and authorised

personnel, in accordance with the instructions provided by the manufacturer.

The Manufacturer is not liable for damages resulting from improper use of the ma-

chine.

Before doing any installation/maintenance work involving access to internal parts of

the machine, all electrical power supplies MUST be disconnected. Failure to follow

this instruction could expose workers to electrical shock or damage the machine.

The information contained in this publication is accurate at the time of going to press but

may be changed without notice.

- 3 -Rev.001 Telesat BT

WARRANTY

TELECO Teleco guarantees its satellite and terrestrial antennas against faulty mate-

rials and/or workmanship. The TELECO warranty is limited to expense-free replace-

ment or repair of all those parts deemed faulty by TELECO. The warranty lasts for a

3 year period starting from the date of product purchase; nevertheless, it shall only

be deemed valid if the customer can produce a written document stating the date of

purchase (invoice or receipt).

The TELECO Warranty does not cover:

• Damage caused by improper installation and/or use and/or maintenance

• Damage resulting from product modications that have not been authorised by

Teleco

• Damage resulting from use of spare parts that are not Teleco originals

• Damage resulting from repairs carried out by personnel who have not been au-

thorised by Teleco

• Normal wear of parts

• Cost of spare part shipping between customer and service centre

• Damages that occur during transport (risks associated with transport are always

borne by the customer)

- 4 - Rev.001Telesat BT

Via E. Majorana , 49 48022 Lugo (RA) ITALY

EC DECLARATION OF CONFORMITY

pursuant to the Machine Directive 2006/42/EC

We hereby declare that the automatic antenna, the specications of which are

provided below, is designed and built to comply with the essential safety and health

requirements of the European Directive on Machine Safety.

This declaration is rendered null and void in the event of incorrect assembly, improp-

er use or modications made to the machine without our written approval.

Machine: AUTOMATIC ANTENNA FOR SATELLITE TV

RECEPTION

Model: Telesat BT 65 - Telesat BT 85

Telesat BT Smart 65 - Telesat BT Smart 85

Serial no. .........................................

Reference Directives:

Machine Directive 2006/42/EC

Low Voltage Directive 2014/35/EU

Electromagnetic Compatibility Directive 2014/30/EU - Regulation 10 UN/ECE Rev. 5

Technical documentation manager: Raul Fabbri, engineer Raul Fabbri

Lugo, 15/04/2019 THE PRESIDENT

Raul Fabbri

- 5 -Rev.001 Telesat BT

Contents

1. GENERAL INFORMATION ..................................................................................................7

2. SPECIFICATIONS ................................................................................................................9

3. TRANSPORT, HANDLING AND STORAGE .....................................................................11

4. INSTALLATION ..................................................................................................................12

4.1 Safety precautions .........................................................................................................12

4.2 Preparing for installation ................................................................................................12

4.3 Pre-assembling the automatic antenna .........................................................................13

4.4 Installing the external drive unit .....................................................................................15

4.5 Installing the control unit and the control panel .............................................................18

4.6 Connections ...................................................................................................................19

4.7 LNB angle adjustment ...................................................................................................22

5. INSTRUCTIONS FOR USE ................................................................................................23

5.1 Safety precautions .........................................................................................................23

5.2 Preliminary information ..................................................................................................23

5.3 DVB-S2 control unit .......................................................................................................24

5.3.1 Control functions .......................................................................................................24

5.3.2 Messages and Icons on the display ..........................................................................25

5.4 Automatic antenna operationTelesat BT ........................................................................25

5.4.1 Satellite search .........................................................................................................25

5.4.2 Switchingoandparkingtheantenna ......................................................................26

5.4.3 Vehiclestart-up:theantennaisautomaticallyswitchedoandparked...................26

5.5 Control via Smartphone .................................................................................................26

5.5.1 Pairing Bluetooth devices .........................................................................................27

5.5.2 Deleting the list of smartphones paired for Bluetooth connection .............................28

5.6 SMART Function ...........................................................................................................28

6. TROUBLESHOOTING .......................................................................................................30

6.6.1 Firmware upgrade .....................................................................................................30

7. MAINTENANCE ................................................................................................................31

7.1 Spare parts ...................................................................................................................31

8. DISPOSAL .........................................................................................................................31

9. SPARE PARTS LIST ..........................................................................................................32

- 6 - Rev.001Telesat BT

1. GENERAL INFORMATION

This user manual provides information on the operation, installation and conguration of the auto-

matic satellite TV reception antenna.

Read this user manual carefully before installation and conguration.

The manufacturer may make changes without prior notice, in accordance with its policy of

continuous product development and upgrading.

For additional information, please contact your local dealer or:

TELECO S.p.A.:

Via E. Majorana 49 - 48022 LUGO (RA)

Web site: www.telecogroup.com

Technical assistance: 899,899,856

1.1 Safety

The automatic antenna complies with safety parameters concerning signals

emitted by mobile devices. Protect the internal control unit and wall-mount-

ed control panel from direct sunlight. Install the internal control unit and

wall-mounted control panel in areas where there is no risk of liquid spillage.

This is to prevent the breakdowns that can be caused by electrical discharges.

Each task must ONLY be carried out after disconnecting from the power sup-

ply and ONLY by authorised personnel.

To prevent electrical shock do not disassemble the automatic antenna or its

accessories.

To prevent damage that may result from electrostatic discharges, do not open

or touch components.

Install the internal control unit in a cool, ventilated area to aid dissipation of the

heat produced during operation.

- 7 -Rev.001 Telesat BT

1.2 Intended use

The automatic Telesat BT antenna is designed for installation on vehicle roofs, although this does

not exclude its use in stationary applications.

The automatic antenna has been designed for satellite TV reception and operates on a 12-24 V DC

(10 - 31 V DC) power supply.

The following reasonably foreseeable uses entail residual risks:

• Removal of protective devices on mechanical or electrical parts during operation.

• Disassembly of mechanical or electrical parts on the machine during operation.

• Operating the machine with the electrical panel open.

These uses, which are unavoidable on account of design, must not be permitted.

 Anyuseotherthanthatwhichisspeciedisnotpermittedbythemanufacturer.

1.3 Unintended uses

All uses not explicitly indicated as INTENDED USES are unintended uses, in particular:

• Connecting the machine to power sources other than those specied.

Using the automatic antenna at voltages other than those indicated could compro-

miseitseciencyanddamagetheequipment.

• Using the machine with the protective devices by-passed or removed.

• Using commercial devices for purposes other than those intended by the manufacturer.

- 8 - Rev.001Telesat BT

2. SPECIFICATIONS

2.1 TechnicalSpecications

Telesat BT

Power supply

12-24 V DC

(10 - 31 V DC)

Absorbed current 4 A @ 12 V DC maximum

Current in stand-by < 20 mA @ 12 V DC

Self-resetting fuse incorporated in the

electronics

4 A

Bluetooth-connectible phones 4

Control unit dimensions

(H x L x D)

30 x 165 x 115 mm

“Automatic antenna” diameter

635 x 590 mm

850 x 780 mm

“Control unit” weight 0.25 kg

Weight of “External motor unit” for

automatic antenna Ø 650 mm

9.0 kg

Weight of “External motor unit” for

automatic antenna Ø 850 mm

10.6 kg

Search system

Fully automatic, NID recognition as per DVB-SI EN 300 468

standards with DVB-S2 Tuner

Satellites that can be set 16

Telesat BT

Model Automatic antenna diameter

TeleSat BT 65 635 x 590 mm

TeleSat BT 85 850 x 780 mm

TeleSat BT Smart 65 635 x 590 mm

TeleSat BT Smart 85 850 x 780 mm

 Some technical specications in this table may vary. Users must take the specications

provided on the automatic antenna nameplate as exact.

- 9 -Rev.001 Telesat BT

2.2 Components

1. External motor-driven unit

2. Dish (650 mm / 850 mm)

3. Universal LNB

4. n° 4 screws and n° 4 locknuts

5. Control unit

6. Power cable

7. External switch cable

8. Heat-shrink sheaths

9. n° 4 M6 locknuts

10. Waterproof box to pass leads through to in-

terior

11. External drive unit motors / control unit con-

nection cable extension

12. External drive unit / control unit coaxial con-

nection cable extension

13. Instruction handbook

14. Control unit/control panel connection cable

(optional)

15. Wall-mounted control panel (optional)

16. External switch (optional)

OPTIONAL

TeleSat BT

MANUALE PER L’INSTALLAZIONE

E ISTRUZIONI D’USO PER L’UTENTE

Telesat BT 65 - Telesat BT 85

Telesat BT Smart 65 - Telesat BT Smart 85

Antenna parabolica per la ricezione televisiva satellitare

Istruzioni in lingua originale

Rev. 000 - 01/2020

Fig. 1

- 10 - Rev.001Telesat BT

2.3 Identicationplates

1. Adhesive ID plate applied on the base of the

external drive unit

2. Adhesive ID plate applied on the control unit

Model

Serial number

Model

Serial number

Fig. 2

The nameplate shown here is an exam-

ple. The user must take the specica-

tions provided on the automatic antenna

nameplate as exact.

The adhesive plates provide the following data:

• Model

• Serial number

• CE symbol certifying the device

3. TRANSPORT, HANDLING

AND STORAGE

3.1 Storage

During transport and storage, the automatic an-

tenna and its components are protected in two

cardboard packages, divided as follows:

• A package containing just the dish (“Fig. 1”

- 2).

• A package containing the remaining compo-

nents (external drive unit, control unit etc.).

Do not place weights on top of the

package containing the dish as doing

socouldcompromiseitsatnessand

integrity.

Do not turn the package upside down.

The correct position is indicated by the

‘this way up’ symbol printed on the pack-

aging(↑↑).

The packaged product must be stored horizon-

tally, in a roofed area that is protected from dust

and moisture.

The electrical equipment has been designed to

withstand shipping and storage temperatures

ranging from:

-20 °C to +40 °C.

- 11 -Rev.001 Telesat BT

3.2 Handling

Observe accident prevention and

safety regulations during lifting and

transport.

Use lifting and transport equipment

with a capacity that is greater than the

load to be lifted.

The automatic antennas, complete with their

packaging, can be moved with standard lifting

and handling equipment.

4. INSTALLATION

4.1 Safety precautions

The power cable must come direct-

ly from the battery and must not

have any splices. Minimum cable

cross-section is 2.5 mm

For cables with a length of 6 m or

more the minimum cross-section is

4 mm

. Only the Telesat BT must be

connected to this cable; all other de-

vices must be connected to another

power supply cable.

Cutting the cables supplied with the

Telesat BT is strictly forbidden.

If a cable is too long it is advisable to

wind it into a coil in a free area of the

vehicle.

Leave a portion of cable in the exter-

nal drive unit area; if technical work

needs to be carried out, this will make

drive unit removal easier.

Failure to observe these instructions auto-

matically renders the Warranty null and void.

4.2 Preparing for installation

When opening packages it is impor-

tant to check the integrity of the com-

ponents.

Check that the dish (“Fig. 1” - 2) has not been

damaged during transport. Proceed as follows:

• Place the edge of the dish against a at sur-

face (e.g. oor or wall) and check for proper

planarity.

If contact between the surface and the

edge of the dish is continuous then pla-

narity is correct (1).

- 12 - Rev.001Telesat BT

The 3-way power connector (3) must

only be inserted in the “12/24 V DC”

socket on the control unit.

Inserting this connector in any other

socket will irreparably damage the

board and render the warranty null

and void.

3. Connect the BLACK cable (5) to the NEG-

ATIVE POLE (-) of the 12/24 V DC service

battery.

4. Connect the RED cable (6) to the POSITIVE

POLE (+).

 Use two cables with a cross-section of

2.5 mm.

WARNING Do not invert the connec-

tions between positive pole and neg-

ative pole.

MOTOR

12/24 Vdc

service

2.5 mm

BLACK

RED

BLACK

RED

Fig. 4

• If it is not (2), contact the Assistance Service.

Fig. 3

4.3 Pre-assembling the automatic

antenna

Components - Tools - Accessories

First name Notes

External motor-driven unit (“Fig. 1” - 1)

Dish (“Fig. 1” - 2)

n° 4 screws and n° 4

locknuts

(“Fig. 1” - 4)

Control unit (“Fig. 1” - 5)

Power cable (“Fig. 1” - 6)

External service battery 12-24 V DC

Electric cable

cross-section 2.5

Once it has been veried that the components

are in good condition, proceed with installation

of the dish on the external drive unit:

1. Temporarily connect the grey motor cables

(1) exiting the external drive unit to the “Mo-

tor” (2) sockets on the control unit.

2. Connect the power cable connector (3) to

the “12/24 V DC” socket (4) on the control

unit.

- 13 -Rev.001 Telesat BT

5. Press the SAT button (7) on the Control Unit

and wait for the satellite dish support arm

(8) to be raised. Once the vertical position is

reached, switch o the Telesat BT by discon-

necting the power cable (“Fig. 4” - 3) from

the control unit.

SAT

Fig. 5

6. Apply the dish on the support arm, lining it

up with the four holes.

7. Use the four supplied screws with nuts (9)

and (10) to secure the dish in position.

Warning: NEVER loosen the two sup-

port arm lock screws (11) when se-

curing the dish as this would compro-

mise proper antenna alignment.

8. Reconnect the power cable (“Fig. 4” - 3) to

the control unit and wait for the support arm

to re-close.

Fig. 6

9. Disconnect both the external drive unit com-

plete with dish and the service battery from

the control unit.

- 14 - Rev.001Telesat BT

4.4 Installing the external drive unit

Components - Tools - Accessories

First name Notes

External drive unit

(“4.3 Pre-assem-

bling the automatic

antenna”)

Heat-shrink sheaths (“Fig. 1” - 8)

n° 4 M6 locknuts (“Fig. 1” - 9)

Waterproof box to pass

leads through

(“Fig. 1” - 10)

External drive unit motors/

control unit connection

cable extension

(“Fig. 1” - 11)

External drive unit/control

unit coaxial connection

cable extension

(“Fig. 1” - 12)

Protective cable raceway -

Silicon glue SIKAFLEX

4.4.1 Installation solutions

Before climbing on top of the vehicle

check that the roof is strong enough

to be walked on. Check with the vehi-

cletter.Ifnot,ascaoldframework

will be required.

1. Carefully check that the vehicle roof can

bear the weight of the external drive unit; if

not, have it strengthened.

2. Select an area in the centre of the roof, large

enough to allow rotation of the automatic an-

tenna. Clean the roof thoroughly at the ex-

ternal drive unit installation point.

3. Identify the on-roof access point to the in-

terior through which the external drive unit

wiring can be run.

4. When attaching, position the external drive

unit base (1) with the shorter side (L min)

perpendicular to the direction of vehicle trav-

el.

L min

L max

850 mm

1500 mm

650 mm

1100 mm

L max

L min

Fig. 7

- 15 -Rev.001 Telesat BT

4.4.2 Installation

To install the external drive unit process as de-

scribed:

1. Remove any transparent lms from the base

plate.

2. Thoroughly clean the underside surfaces

of the base plates (1) and apply a layer of

silicon glue (2) over the entire surface (e.g.

Sikaex).

3. Position the cables exiting the external drive

unit - the motor cables (3) and coaxial cable

(4) - towards the front or rear part of the base

along the direction of travel of the vehicle.

4. Fix the external drive unit on the vehicle roof

as per the previously illustrated installation

solutions (“Fig. 7”).

Fig. 8

5. Apply silicone adhesive along the entire

perimeter of the xing plate to make it com-

pletely watertight.

Fig. 9

If the external drive unit needs re-

pairing, unscrew the 4 locknuts (5) to

remove the unit. When reassembling

the external drive unit, to ensure op-

timal nut tightening and avoid any

pin breakage tighten the nuts with a

torque wrench set at 8 N/m.

8 N/m

Fig. 10

- 16 - Rev.001Telesat BT

4.4.3 Wiring

The cables exiting the base of the external

drive unit (“Fig. 8” - 3 “Motor Cable”) (“Fig. 8”

- 4 “Coaxial cable”) are normally long enough

to connect to the control unit installed inside the

vehicle.

If they are not use the supplied extension leads

(Sect. “4.4.4 Wiring with extension leads”).

1. Insert the cables in the protective raceway

(1) until they reach the point where they are

introduced into the vehicle interior (2).

2. Introduce the cables into the watertight ca-

ble box (3) through which they are passed.

3. Seal the watertight box (3) with silicon seal-

ant to prevent any water inltration.

Fig. 11

4.4.4 Wiring with extension leads

When installing the antenna, position (if

possible) the connections between the

cables exiting the drive unit base and the

extension leads inside the vehicle.

1. Insert the heat-shrink sheaths (1).

2. Connect the motor lead wiring exiting the ex-

ternal drive unit to the extension (2).

3. Connect the coaxial cable exiting the exter-

nal drive unit to the extension (3).

4. Place the heat-shrink sheaths (1) over the

just-made connections.

5. Heat the sheaths (1) so they adhere to the

connections and make them watertight.

Warning: danger of burns!

Fig. 12

- 17 -Rev.001 Telesat BT

4.5 Installing the control unit and

the control panel

Components - Tools - Accessories

First name Notes

Control unit (“Fig. 1” - 5)

Wall-mounted control

panel (Optional)

(“Fig. 1” - 15)

Control unit attachment

screws

The automatic antenna complies with

safety parameters concerning signals

emitted by mobile devices. Protect the

internal control unit and wall-mount-

ed control panel from direct sunlight.

Install the internal control unit and

wall-mounted control panel in areas

without any risk of liquid spillage.

This is to prevent the breakdowns

that can be caused by electrical dis-

charges.

Install the internal control unit in a

cool, ventilated area to aid dissipa-

tion of the heat produced during op-

eration.

1. Install the control unit (1) in an easily acces-

sible compartment in a way that takes into

account the position and curvature of the

leads (2).

2. Install the control panel (Optional) (3) in an

easily accessible and visible position.

OPTIONAL

Fig. 13

- 18 - Rev.001Telesat BT

4.6 Connections

Components - Tools - Accessories

First name Notes

Power cable (“Fig. 1” - 6)

Control unit / control panel

connection cable

(“Fig. 1” - 14)

Wall-mounted control

panel (Optional)

(“Fig. 1” - 15)

External switch (optional) (“Fig. 1” - 16)

Electric cable

cross-section 2.5

After completing the wiring tasks (Sect. “4.4.3

Wiring”), proceed as described:

1. Connect the GREY motor cables (1) to the

“Motor” connectors on the control unit (2).

2. Connect the WHITE coaxial cable (3) to the

“LNB” connectors on the control unit.

3. Connect the control panel (Optional) (4) to

the “Panel” connector on the control unit us-

ing the connection cable (Optional) (5 “Con-

trol unit / control panel connection cable”).

OPTIONAL

MOTOR

PANEL

LNB

GREY

WHITE

Fig. 14

4. Connect the power cable connector (“Fig.

15” - 6) to the “12/24 V DC” connector on the

control unit.

The 3-way power connector (3) must

only be inserted in the “12/24 V DC”

socket on the control unit.

Inserting this connector in any other

socket will irreparably damage the

board and render the warranty null

and void.

- 19 -Rev.001 Telesat BT

5. Use an electrical lead with a minimum

cross-section of 2.5 mm

to connect the

BLACK CONNECTOR (7) to the NEGATIVE

POLE (-) of the 12/24 V DC vehicle battery

(8).

6. Use an electrical lead with a minimum

cross-section of 2.5 mm

to connect the RED

CONNECTOR (9) to the POSITIVE POLE

(+) of the 12/24 V DC vehicle battery (8).

WARNING Do not invert the connec-

tions between positive pole and neg-

ative pole.

Should you use 12/24 V DC power

adapters instead of batteries, make

sure you are using a stabilised power

supply able to provide 5 A continu-

ously and at least 10 A for short peri-

ods. NEVER use low quality, non-sta-

bilised battery chargers.

7. Use an electrical cable to connect the

GREEN safety connector (10) to the con-

sensus of the vehicle ignition console (11)

(in many cases this consensus is located on

Pin 15 on the main terminal board).

The vehicle ignition console safety connec-

tion allows vehicle status to be monitored.

When the engine is started a positive + 12/24

V DC signal is sent to the control unit; this

automatically starts the antenna closure pro-

cedure and locks all control unit functions.

8. Connect the coaxial cable of the receiver or

TV with receiver (12) to the “Receiver” con-

nector on the control unit. You can connect

any satellite receiver.

9. Connect the external switch (Optional) (13)

to the “AUX” connector on the control unit

using the supplied cable (14 “Optional switch

connection cable”).

NOT SUPPLIED

12/24 Vdc

AUX

RECEIVER

12/24 Vdc

OPTIONAL

2.5 mm

107

BLACK

GREEN

RED

BLACK

GREEN

RED

Fig. 15

- 20 - Rev.001Telesat BT

Page is loading ...

Teleco Telesat BT User manual

Teleco Telesat BT User manual

Teleco Telesat BT User manual

Related papers

Other documents