Whirlpool ART 695 Program Chart

Whirlpool
Brand
Whirlpool
Model
ART 695
Type
Program Chart

This manual is also suitable for

PRODUCT SHEET
GB
I
RO
PL SK H RUS BG
GB
CZ
A. Refrigerator Compartment
1. Light
2. Shelves / Shelf area
3. Crispers
4. Door trays
5. Removable bottle retainer (depending
on model)
6. Rating plate (at the side of the crispers)
7. Fan (depending on model)
7a. Fan intake area
B. Freezer compartment
8. Rack for ice cube trays or ice packs
(depending on model)
9. Upper basket (area for freezing)
10. Baskets for storing frozen food
11. Freezer compartment door
C. Control panel
Least cold zone
Intermediate temperature zone
Coldest zone
N.B.: The number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: Fridge-freezer accessories must not be washed in a dishwasher.
5019 637 33054
I
RO
PL SK H RUS BG
GB
CZ
The fridge-freezer has two compressors which allow independent control of the
refrigerator and freezer compartments.
Control panel
1. Refrigerator compartment "ON" button.
2. Green LED indicating operation of the
refrigerator compartment.
3. Refrigerator compartment temperature
controls.
3a. Display indicating the refrigerator
temperature setting.
4. Freezer compartment "ON" button.
5. Green LED indicating operation of the
freezer compartment.
6. Freezer compartment temperature controls.
6a. Display indicating the freezer temperature
setting.
7. Fast freeze button.
8. Fast freeze indicator LED (yellow).
9. Red LED alarm for indicating critical
temperatures within the freezer (see chapter
“How to operate the freezer compartment”).
10. Button to deactivate the freezer temperature
acoustic alarm.
11. Fast cooling button.
12. Fast cooling indicator LED (yellow).
Refrigerator compartment internal temperature control
The temperature is factory set to +5°C (display 3a). Adjusting the temperature:
Press the button (3) until the display shows the desired value (3a).
Temperature selection limit: from +2°C (minimum)
a +8°C (maximum)
Freezer compartment internal temperature control
The temperature is factory set to -19°C (display 6a). Adjusting the temperature:
Press button (6) until the display shows the desired value (6a).
Temperature selection limit: from -18°C (maximum)
to -24°C (minimum)
Note: The ambient air temperature, the frequency of opening the door and the position of the appliance can
affect the internal temperatures of the refrigerator. These factors should therefore be taken into account
when setting the temperature with buttons (3) and (6).
Fan (depending on model):
The fan gives more even temperature distribution inside the refrigerator compartment, thus allowing better
conservation of stored food.
The fan can be switched off by pressing the specific button (if provided - depending on the model).
Important: The fan is electrically operated. The electronic device activates the fan when it is necessary.
DO NOT obstruct the fan intake area (7a) with food.
LOW ENERGY CONSUMPTION (blank display function).
The power consumption values take into account the active function. To disable this function, press button
10 (press for at least 5 seconds) until the display becomes blank; it will switch on again for approx. 1 minute
whenever the door is opened or a button is pressed. To disable the function, press button 10 again until the
acoustic signal sounds.
The function switches off automatically when the alarm is deactivated.
The fridge-freezer can operate at ambient temperatures between +16°C and +38°C.
  • Page 1 1
  • Page 2 2

Whirlpool ART 695 Program Chart

Whirlpool
Brand
Whirlpool
Model
ART 695
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents