Bauknecht KGE335 PROFRESH A++ IO Program Chart

KGE335 PROFRESH A++ IO
Bauknecht
Brand
Bauknecht
Model
KGE335 PROFRESH A++ IO
Category
Fridge-freezers
Type
Program Chart

This manual is also suitable for

A. Refrigerator Compartment
2. Lighting
3. Shelves / Shelf area
4. Multi-flow cold air system
5. Cooler compartment
6. Rating plate with commercial name
8. Crisper divider
9. Reversibility kit
10. Egg tray
11. Separator
12. Door trays
B. Freezer Compartment
13. Upper basket (freezing zone)
14. Ice tray and/or cold accumulator
15. Storage basket for frozen food items
16. The freezer door trays for pizza or other frozen products with a
short storage time (2** storage compartment)
Depending on the model the number and type of accesories may vary.
C. Control panel
Anti-bacterial protection:
1. Filter in fan (depending on the model)
7. Crisper with antibacterial additives (depending on the model)
17. Door seals
The crisper and the door seals are manufactured from materials that
inhibit bacterial growth.
Freezer using:
- The freezer compartment can be used without the baskets to increase
storage for large food. Place the food directly on the racks.
After inserting food, ensure that the freezer compartment door closes
properly.
Notes:
- In case of power failure the cold accumulator helps to keep optimal
storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depends on the ambient
temperature, frequency of opening the doors, as well as location of the
appliance. Temperature setting must consider these factors.
- The appliance accessories are not suitable for washing in dishwasher.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the upper part
of the condenser at the rear of the appliance.
After plugging the appliance to the mains, it
starts the operation automatically.
After starting the appliance, wait at least 4-6
hours before placing food into the appliance.
Particular control elements are activated:
• The indicator LEDs on the control panels light up for 2 seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
CONTROL PANEL DESCRIPTION
(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON)
- fridge cabinet temp. setting - (green LED light OFF)
(3) Temperature selection button "Temp.°C".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Reset alarm" pushbutton.
(8) Internal light switch.
Temperature Adjustment between cabinets is made
with the "Fridge / Freezer" button (1). When the
LED (2) is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartment may be set by
the temperature setting pushbutton (3) on the control panel.
On the left there are described the 5 set
points for the fridge compartment.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
To adjust the temperature in the freezer
compartment, use the "Fridge / Freezer" button
(1) to control the temperature in the freezer cabinet.
The green LED (2) turns ON.
The temperature in the freezer compartment may be set by the
temperature setting pushbutton (3) on the control panel.
On the left are described the 5 set points for
the freezer compartment and fast freezing.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
After setting the "Fast Freezing" (automatically disabled after 24 hours)
the freezer temperature is set to previous displayed setpoints.
When the product is disconnected from the power supply and then
reconnected, the control unit remembers previously set temperatures
for freezer and refrigerator.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "ProFresh" function can
work and also when the ambient air temperature is over 27 ÷ 28°C or
if you perceive drops of water on the glass shelves or in the severe
humidity conditions. If fridge is too cold the fan can be switched off.
Note:
Do not obstruct the air intake area with food items.
When ProFresh is disabled remember to turn off the fan when
there is a lower ambient air temperature.
To turn off the fan press the button (1a).
If the appliance has the fan it can be equipped with the antibacterial
filter.
Remove it from the box (found in the crisper drawer (item 7) and insert
into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
DEFROSTING THE REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment
indicate that the automatic defrost phase is in progress. The defrost
water is automatically run into a drain hole and collected in a container,
where it evaporates.
DEFROSTING THE FREEZER COMPARTMENT
The freezer should be defrosted once or twice a year or when excessive
frost is present (3 mm thickness). The formation of frost is normal. The
amount and rate at which frost accumulates depends on room
conditions and how often the door is open.
PRODUCT SHEET
GB
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Description:
LED OFF
LED ON
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
fast freezing (Freezer)
Description:
LED OFF LED ON
IGB FINDKNSGRPENLFD
To defrost the unit, switch off the freezer
compartment or the whole appliance,
depending on the model, and remove all food
products. Leave the freezer door open to
allow the frost to melt.
For appliances in figure only pull out the
defrost water drain and place a container
under the drain.
When the operation is completed, put back
the defrost water drain.
Clean the inside of the freezer. Rinse and dry thoroughly. Switch the
freezer compartment, or the whole appliance, back on and store the
food inside.
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from
the power supply before replacing any
light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: put the fingers into the side ventilation holes
(1), stretch the cover gently and move it upwards.
2. Check the bulb. If necessary unscrew the broken bulb and replace it
with the new one (use maximum 15W bulb).
3. Put on the light cover.
Do not leave the bulb uncovered.
GUIDE TO SELECTING FUNCTIONS
Functions and settings
Fast Freezing: For more efficient freezing activate this function 24
hours before freezing fresh products.
- Select Freezer compartment by using button (1), LED (2) shall turn
ON.
- Press and hold the temperature setting button Te m p . ° C until 3 green
LEDs light up simultaneously (4) (5) (6).
After 24 hours place the food to be frozen in the upper basket of the
freezer compartment.
This function is automatically disabled after 24 hours.
To deactivate it earlier follow the procedure:
- Press and hold by 3 sec. the temperature setting button Te m p . ° C
again while the LED (2) remains ON - the temperature selection lights
will return to previous displayed temperature setpoint.
Reset alarm
If any alarm appears, the user could reset the acoustical sound by
pressing once Reset alarm pushbutton.
"Black-out alarm" (power supply failure) - in case of power failure,
the appliance automatically monitors the temperature changes in the
freezer compartment after the power supply returns. The "Black-out
alarm" will activate, if the temperature has risen above the admissible
level.
This is indicated by:
- Flashing of the green LED (2)
- Activation of a beep.
When the "Black-out alarm" is actived, it is recommended to proceed
as follows:
- If the food in the freezer is not frozen but is still cold, transfer it
promptly to the refrigerator compartment and consume within 24
hours.
- If the food in the freezer is frozen, it has re-frozen after thawing
caused by the power failure. The consumption of re-frozen food is not
recommended because it has lost its nutritive value and may be
hazardous to your health.
Note
The "Black-out alarm" does not guarantee the food quality and its
safety in case of consumption. It only indicates the necessity to assess
the quality of food in the freezer and refrigerator compartments.
To deactivate the alarm, press once Reset alarm pushbutton, the
flashing of the green LED (2) go off.
- The temperature will return to the normal operating cycle level and
the beep will stop.
Door open alarm
When the refrigerator compartment door remains open for more than 2
minutes, the beep is activated.
When the door is closed the product returns to normal operation, the
beep will stop.
Overtemperature alarm in freezer compartment.
Overtemperature alarm activation is indicated by:
- Flashing of the green lamps (4) (5) (6).
- Activation of a beep.
The alarm is activated when:
• The appliance is connected to the power supply for the first time or
after prolonged disuse.
• The freezer compartment temperature is too high.
• The quantity of foods loaded into the freezer exceeds that indicated
on the data plate.
• The freezer door has been left open for a long time .
To deactivate the beep of the alarm, press Reset alarm pushbutton.
The flashing LEDs (4) (5) (6) go off when the minimum required
temperature is reached.
"Dynamic Intelligence" function
The "Dynamic Intelligence" function helps to maintain optimal
conditions to storage of food and is automatically activated when:
• a large amount of food is loaded into the refrigerator and freezer;
• the freezer door is left open for a long time;
• a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
ProFresh
The ProFresh is activated by default and is working only with Fan on.
To disactivate the ProFresh function press for at least 3 sec. both
buttons Cavity selection "Fridge / Freezer" and "Temp.°C". A long
sound signal will be provided for the deactivation of the ProFresh.
In order to activate this function follow the same procedure (keeping
pressed the 2 buttons for 3 sec.). A short sound signal will be provided
for the activation of the ProFresh.
This function controls the fridge fan in order to optimize food
preservation in any ambient temperature conditions.
To minimize the Energy consumption is suggested to disable the
ProFresh function and fan.
5019 437 01025
Printed in Poland 03/10
OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs
In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To check the code alarm user have to
press and hold the temperature setting Temp.°C & Reset alarm pushbuttons and alarm code will be showing on the temperature LEDs (possible
alarm codes are explained in the table below).
When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs, the fridge/freezer functions
such as temperature adjustment, super freezing are not available until the fault is eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest priority).
Alarm Priority
Codification to be displayed by
temperature lamps
Action
LED 4 LED 5 LED 6
Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.
Evaporator Temperature Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.
Ambient Temperature Sensor Alarm - Fridge compartment 3 Contact the After-Sales Service and provide the alarm code.
Description: LED OFF LED ON
PRODUCT SHEET
GB
FINDKNSGRIPENLFGBD
  • Page 1 1
  • Page 2 2

Bauknecht KGE335 PROFRESH A++ IO Program Chart

KGE335 PROFRESH A++ IO
Bauknecht
Brand
Bauknecht
Model
KGE335 PROFRESH A++ IO
Category
Fridge-freezers
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents