IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT OVERSTOCK.COM CUSTOMER SERVICE AT
1-800-843-2446
260106rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT CONSUMER SUPPORT AT
1-800-843-2446
Warranty Information:
Products for Home Use
For warranty issues please contact the retailer directly at:
1-800-843-2446
or
www.Overstock.com
Made in China
Distributed by:
Overstock.com
6350 South 3000 East
Salt Lake City, UT 84121
OV SKU No. 10090627-000-000, 10090628-000-000,
10090629-000-000, 10090630-000-000,
10090631-000-000
Model No. 50104082, 50105107, 50105108,
50105109, 50105110
Calabria Dining Armchairs,
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
PARTS LIST
PART # DESCRIPTION QUANTITY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT CUSTOMER SERVICE AT
1-800-843-2446
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
A Chair Back 2
B Left Chair Leg 2
C Right Chair Leg 2
D Seat Frame 2
E Short Bolt 8
F Long Bolt 8
G Wrench 1
H Plastic Bolt Cap 16
J Chair Cushion 2
NOTE: This product is intended for residential, non-commercial use.
Parts Detail
A
B
C
D
E
F
G
H
1
2
Attach Chair Seat
1.(SEE FIGURE 2) Align seat frame (D)
with chair back (A) and left chair leg (B)
as shown.
2.Attach seat frame (D) to chair back (A)
using long bolt (F).
3.Attach seat frame (D) to left chair leg (B)
using short bolt (E).
4.Loosely tighten bolts using wrench (G).
Do not completely tighten.
Figure 3
Figure 2
Attach Right Chair Leg
1.(SEE FIGURE 3) Align right chair leg (C)
with chair back (A).
2.Attach right chair leg (C) to chair back (A)
using long bolt (F).
3.Attach right chair leg (C) to seat frame (A)
using short bolt (E).
4.Tighten all bolts using wrench (G).
C
D
E
H
F
F
E
ASSEMBLY INSTRUCTIONS
Attach Left Chair Leg to Chair Back
1.(SEE FIGURE 1) Align chair back (A)
with left chair leg (B).
2 Attach left chair leg (B) to chair back (A)
using long bolt (F). Loosely tighten bolt
using wrench (G).
Do not completely tighten.
CAUTION: Do not over tighten
hardware.
F
G
B
A
Figure 4
Install Bolt Caps
1.(SEE FIGURE 4) Place plastic bolt caps (H)
on end of each chair leg.
Repeat assembly instructions for
second chair.
Install Chair Cushions
1.Place one chair cushion (J) on each chair,
attach using velcro straps before using.
NOTE: To ensure your satisfaction,
this product has been tested to meet
or exceed a capacity of at least 300
pounds during normal use.
J
A
B
A
/
