IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT OVERSTOCK.COM CUSTOMER SERVICE AT
1-800-843-2446
180106rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT CONSUMER SUPPORT AT
1-800-843-2446
Warranty Information:
Products for Home Use
This item and or product is not covered under original manufacturer's warranty.
For warranty issues please contact the retailer directly at
1-800-843-2446
or
www.Overstock.com
Made in China
Distributed by:
Overstock.com
6350 South 3000 East
Salt Lake City, UT 84121
OV SKU No. 10100568-000-000
Model No. 50103305
Cassimira Chair
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-800-843-2446.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 2Chair Back Assembly
B 2Left Chair Leg
C 2Right Chair leg
D 2Seat Assembly
E 12Flat Head Screws
Join Chair Legs And Top Of Chair
1. (SEE FIGURE 1) Join together left chair leg (B), right chair leg (C) and top of chair
back assembly (A). Slide mounting posts of left and right chair legs completely into
top of chair assembly.
Attach Chair Legs to Chair Back
2. Align left and right chair leg assemblies with sides of chair back (A). Attach chair legs to sides
of chair back using flat head screws (E), loosely fasten.
Attach Seat to Chair Legs
3. Place seat assembly (D) between left and right leg assemblies. Align mounting posts of seat
with mounting holes on legs assemblies. Fasten using flat head screws (E).
NOTE: The front of the seat rests on the two mounting post from the legs,
as shown in Figure 1.
4. Tighten all hardware.
A
A
B
D
D
E
C
B
E
ASSEMBLY INSTRUCTIONS
Figure 1
C
1
2
CAUTION:
D
o
not
ove
r
ti
ghten
hardware.
This
ma
y res
ult in
stripp
ed thre
ads
.
Mounting
Holes
Parts Detail
Mounting
Posts
E
E
E
E
E
Place seat on top
of mounting posts
from legs.
/
