dji Zenmuse X3 Quick start guide

Type
Quick start guide

This manual is also suitable for

INSPIRE 1
1345 Propeller Locks Quick Start Guide
The Inspire 1 Propeller Lock is designed to secure the
1345 propellers in place during ight.
Installation:
1. Tighten the propellers on the motor by hand, and
ensure they are securely mounted before installing
the propeller locks.
2. Align the tips of propeller lock with the ventilation
holes on the motor and slide the propeller lock onto
the nut of propeller. Press the propeller lock against
the motor rmly to ensure it is installed securely.
1
2
Removal:
Press the tips of the propeller locks to release the lock.
After removing, store the propeller locks in a proper
place for future use.
3. Installation complete. Examine to ensure the propeller
lock is tight on the motor.
Ensure the propeller locks are securely installed
before each ight.
©
2015 DJI. All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3

dji Zenmuse X3 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI