Whirlpool AKZ 308 WH Owner's manual

Whirlpool
Brand
Whirlpool
Model
AKZ 308 WH
Category
Barbecues & grills
Type
Owner's manual

This manual is also suitable for

AKZ 308 PRODUCT DESCRIPTION
SHEET
BE ES PT
5019 100 56001
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Oven light
6.
Seat for turnspit
7.
Lower heating element (not visible)
8.
Door hinge
9.
Oven door
1.
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Control knob for front, left cooking zone*
0 1 ...10
5.
Control knob for rear, left cooking zone*
0 1 ...10
6.
Control knob for rear, right cooking zone*
0 1 ...10
7.
Control knob for front, right cooking zone*
0 1 ...10
8.
Cooktop “ON” indicator light
*The cooktop control knobs are not
interchangeable. After cleaning or servicing, they
must be returned to their original positions.
The cooling fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the
oven and/or cooktop.
After the oven and/or the cooktop switch off, the
cooling fan may, however, continue to run for a
certain time to ensure proper cooling.
Important:
An optional kit consisting of an oven
door glass and of relevant mounting components, is
available by the After-Sales Service. The use of the
kit reduces the temperature of the outer oven
surface and is strongly recommended if there are
Kids in the house.
Code N°: 4819 310 39186
.
i
OVEN
CONTROL PANEL
Accessories:
•Grid
• Baking tray
•Drip tray
Last
First
5019 100 56001
GB
0
Off
Oven light
BOTTOM HEATING FUNCTION
Use:
-
To finish baking fruitcakes or cheesecakes.
-
To thicken sauces.
Use the lower heating function for the last 10 or 15
minutes of cooking time.
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Pre-heat the oven to the required cooking
temperature and place the food inside as soon as
the red thermostat indicator light switches off.
-
Ideally, the shelf should be on the second runner
level when using the static function.
GRILL FUNCTION
Use the grill function to cook small pieces of meat
(steaks, sausages) and for making toasts.
-
The oven door must be closed during the
cooking cycle.
-
Preheat the grill for about 5 minutes.
Arrange the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover the
bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through
cooking time.
GRILL +TURNSPIT FUNCTION
- Place the food on the spit and secure it with the
two forks.
- Place the grid supporting the spit inside the oven
on the second runner.
- Insert the spit in the hole provided on the rear wall,
laying it on the support grid.
- Remove the handle from the spit.
- Place the drip tray under the grid. We suggest you
poured some water in the drip tray to reduce
smokes and grease spatters.
- Close the oven door.
.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the
required temperature.
The red thermostat indicator light switches on
.
• When the required temperature is reached, the
red thermostat indicator light switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - •).
.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
5019 100 56001
GB
The cooktop control knobs are marked with a
numerical scale corresponding to different power
settings, and a series of function symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food
can be kept warm when cooking is finished.
How to operate:
1.
Turn the knob to .
2.
To deactivate the Keep Warm function, change
the knob position.
DUAL ZONE FUNCTION
(dependent on model)
This function is available on the front left and rear left
cooking zones. The dual-zone function extends the
heated area of the cooktop so that you can use
large, oval or rectangular pans.
How to operate:
1.
Turn the knob to and wait for the residual
heat indicator for the chosen hotplate to start
flashing.
2.
Select the required power by turning the knob anti-
clockwise. The residual heat indicator remains lit to
show that the cooktop is switched on.
3.
To deactivate the function return the knob to
“0”
.
FAST BOILING FUNCTION
This function makes it possible to bring water to the
boil fast; the Fast Boiling function remains active for
a preset time. Once the preset time has elapsed, the
cooktop returns automatically to maximum power
level. The Fast Boiling function can be activated also
once you have already started cooking.
Warning:
Make sure you have placed the pan on the
cooking zone before activating the fast boiling
function or the glass-ceramic surface may be
damaged.
Specified performance values for the Fast Boiling
function are guaranteed for all types of glass-
ceramic cooktops.
How to operate:
1.
Place the pan on the chosen cooking zone.
2.
Set
the knob to .
GENTLE HEAT FUNCTION
Can be used to raise dough, soften hard butter from
the fridge, keep a baby's bottle or a baby food warm,
for yoghurt making, melting chocolate, etc...
This function is available only when the residual heat
indicator light is on.
How to operate:
1.
Make sure that the relative cooking zone residual
heat indicator light is on.
2.
Turn the knob to .
3.
To deactivate the function change the knob
position.
COOKTOP FUNCTIONS
This symbol does not correspond to any
cooktop mode; the heating element is not
powered
  • Page 1 1
  • Page 2 2
  • Page 3 3

Whirlpool AKZ 308 WH Owner's manual

Whirlpool
Brand
Whirlpool
Model
AKZ 308 WH
Category
Barbecues & grills
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents