5019 410 53271
ESN 4483 PRODUCT DESCRIPTION SHEET
CH
1. Oven functions selector knob
2. Oven thermostat knob
3. Thermostat indicator light
4. Cooktop control knobs
5. Cooktop “ON” indicator light
OVEN
Last
First
First...Last: Runner positions
1. Control panel
2. Upper/grill heating element
3. Oven light
4. Lower heating element (not visible)
5. Oven door hinges
6. Oven cool door
Accessories:
•Grid
• Baking tray
• Drip tray
CONTROL PANEL
0 Off
Oven light
BOTTOM HEATING FUNCTION
Use:
- To finish baking fruitcakes or cheesecakes.
- To thicken sauces.
Use the lower heating function for the last 10
or 15 minutes of cooking time.
STATIC FUNCTION
Use when all the food is on the same runner
level.
- Pre-heat the oven to the required cooking
temperature and place the food inside as
soon as the red thermostat indicator light
switches off.
- Ideally, the shelf should be on the second
runner level when using the static function.
GRILL FUNCTION
Use the grill function to cook small pieces of
meat (steaks, sausages) and for making toasts.
- The oven door must be closed during the
cooking cycle.
- Preheat the grill for about 5 minutes.
- Arrange the meat on the grid with the drip
tray underneath. Pour water in the drip tray
to cover the bottom to reduce smoke and
fat spatters.
- Turn over the meat about half-way through
cooking time.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the
required temperature.
The red thermostat indicator light switches on.
• When the required temperature is
reached, the red thermostat indicator light
switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - •)..
The control panel is provided with four
adjustable knobs controlling the hotplates.
The double zone control knobs (4) and (5) are
marked from 0 to 12 and the symbol .
The control knobs (6) and (7) are marked from
0 to 12.
Note: the yellow indicator light on the panel
switches on every time one of the hotplates is
in operation.
SWITCHING ON THE COOKTOP:
Follow the instructions provided with the
cooktop.
Importante:
• When the hotplates are used for the first
time, turn the selector knobs to position
(12) and leave on for approx. 3 minutes,
without anything on the hotplates.
• Never operate the hotplates without
anything on them.
• Use pots and pans that are suitable for
electric hotplates, with thick base.
• The diameter of the base of pots and pans
must be the same or slightly greater than
that of the hotplate..
OVEN FUNCTIONS
SWITCHING THE OVEN ON
HOW TO USE THE COOKTOP CONNECTED TO THE OVEN
/