Whirlpool AKZ 316 IX Program Chart

Whirlpool
Brand
Whirlpool
Model
AKZ 316 IX
Category
Hobs
Type
Program Chart

This manual is also suitable for

4
AKZ 316
PRODUCT DESCRIPTION SHEET
D E
First... Last. Runner positions
1. Control panel
2. Cooling fan (not visible)
3. Upper heating element
4. Grill element
5. Oven light
6. Fan
7. Lower heating element (not visible)
8. Door hinge
9. Door
Last
First
OVEN
Accessories (the number of accessories varies
according to the model):
• Grid
• Baking tray
is a registered trademark
of Whirlpool, U.S.A.
1. Oven function selector knob
2. Oven thermostat knob
3. Thermostat indicator light
CONTROL PANEL
* The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned
to their original positions.
N.B.: The cooling fan may run at two different speeds, which are:
1) Full speed
2) Low speed
The operation with the two speeds is related to the temperature attained by the oven and/or by the hob.
The cooling fan may however operate for a certain period of time after switching off the oven and/or hob
to ensure correct cooling.
Important: An optional kit consisting of an oven door glass and of relevant mounting components, is available
by the After-Sales Service. The use of the kit reduces the temperature of the outer oven surface and is strongly
recommended if there are Kids in the house.
Code N° 4819 310 39186.
4. Cooktop control knob (front left).
Functions: 0 1 ... 1 0
*
5. Cooktop control knob (rear left).
F u n c t i o n s : 0 1 ... 1 0
*
6. Cooktop control knob (rear right).
F u n c t i o n s : 0 1 ... 1 0
*
7. Cooktop control knob (front right).
F u n c t i o n s : 0 1 ... 1 0
*
8. Cooktop “ON” indicator light
5
0 Off
Oven light
STATIC FUNCTION
Use when all the food is on the same runner level.
- Preheat the oven to the required cooking
temperature and place the food inside as soon as
the red thermostat indicator light switches off.
- Ideally, the shelf should be on the second runner
level when using the static function.
STATIC FUNCTION + FAN
Use this function when cooking on two different levels.
- Oven preheating is not necessary (except for
pizzas and focaccia).
- Switch the position of the dishes in the oven 10
minutes before the end of cooking time.
- Remove the cooked dish and, if necessary, continue
cooking the other one for as long as required.
GRILL FUNCTION
Use the grill function to cook small pieces of meat
(steaks, sausages) and for making toast.
- The oven door must be closed during the cooking
cycle.
- Preheat the grill for about 5 minutes.
- Arrange the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover
the bottom to reduce smoke and fat spatters.
- Turn over the meat about half-way through
cooking time.
GRILL + FAN
Ideal for large joints, pork, chicken and roast beef.
- The oven door must be closed during the cooking cycle.
1. Place the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover
the bottom to reduce smoke and fat spatters.
2. Turn over the meat about half-way through
cooking time.
DEFROST FUNCTION
Ideal for thawing frozen foods to room temperature.
- The food should be inserted in the oven in its
wrapping to prevent it from drying out.
OVEN FUNCTIONS
• Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the
required temperature.
The red thermostat indicator light switches on.
When the required temperature is reached the
red thermostat indicator light switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - ●).
SWITCHING THE OVEN ON
6
The cooktop control knobs are marked with a
numerical scale corresponding to different power
settings, and a series of function symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food
can be kept warm when cooking is terminated.
How to operate:
1. Turn the knob to .
2. To deactivate the keep warm function, change
the knob position.
DUAL ZONE FUNCTION
(Dependent on cooktop model)
This function is available on the front left and rear
left cooking zones. The dual zone function extends
the heated area of the cooktop so that you can use
large, oval or rectangular pans.
How to operate:
1 . Turn the knob to and wait for the residual heat
indicator for the chosen hotplate to start flashing.
2 . Select the required power by turning the knob
anti-clockwise. The residual heat indicator remains
lit to show that the cooktop is switched on.
3. To deactivate the function return the knob to "0".
GENTLE HEAT FUNCTION
Can be used to prove dough, soften hard butter
from the fridge, keep a baby's bottle or baby food
warm, for yoghurt making, softening chocolate, etc.
This function is only available when the relative
cooking zone residual heat indicator light is
switched off.
How to operate:
1. Make sure the residual heat indicator light for the
cooking zone you intend to use is switched off.
2. Turn the knob to .
3 . To deactivate the function change the knob
p o s i t i o n .
This symbol is not linked to an appliance function:
the heating element is switched off.
COOKTOP FUNCTIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3

Whirlpool AKZ 316 IX Program Chart

Whirlpool
Brand
Whirlpool
Model
AKZ 316 IX
Category
Hobs
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents