Bauknecht ESNA 4462 WS Program Chart

Category
Hobs
Type
Program Chart
5019 410 53231
ESNA 4462
PRODUCT DESCRIPTION SHEET
CH
0
Off
Oven light
BOTTOM HEATING FUNCTION
Use:
-
To finish baking fruitcakes or cheesecakes.
-
To thicken sauces.
Use the lower heating function for the last 10 or 15 minutes of cooking time.
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Preheat the oven to the required cooking temperature and place the food inside as soon as the red
thermostat indicator light switches off.
-
Ideally, the shelf should be on the second runner level when using the static function.
GRILL FUNCTION
Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.
-
The oven door must be closed during the cooking cycle.
-
Preheat the grill for about 5 minutes.
-
Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover
the bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through cooking time.
Turn the selector knob to the required symbol.
The oven light switches on.
Turn the thermostat knob clockwise to the required temperature.
The red thermostat indicator light switches on.
When the required temperature is reached, the red thermostat indicator light switches off.
End of cooking cycle:
Return the knobs to the OFF position (0 - ).
OVEN
First
Last
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element
5.
Oven light
6.
Lower heating element (not visible)
7.
Door hinge
8.
Oven cool door
Accessories:
Grid
Baking tray
Drip tray
CONTROL PANEL
1.
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Cooktop control knob (front left)
Functions:
01...10
*
5.
Cooktop control knob (rear left)
Functions:
01...10
*
6.
Cooktop control knob (rear right)
Functions:
01...10
*
7.
Cooktop control knob (front right)
Functions:
01...10
*
8.
Cooktop ON indicator light
*The cooktop control knobs are not interchangeable. After cleaning or servicing, they mus
t
returned to their original positions.
The cooling fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the oven and/or the cooktop.
After the oven and/or the cooktop switch off, the cooling fan may, however, continue to ru
n
a certain time to ensure proper cooling.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
The cooktop control knobs are marked with a numerical scale corresponding to different power
settings, and a series of function symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food can be kept warm when cooking is terminated.
How to operate:
1.
Turn the knob to .
2.
To deactivate the keep warm function, change the knob position.
DUAL ZONE FUNCTION (Dependent on cooktop model)
This function is available on the front left and rear left cooking zones. The dual zone function extends
the heated area of the cooktop so that you can use large, oval or rectangular pans.
How to operate:
1.
Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start
flashing.
2.
Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit
to show that the cooktop is switched on.
3.
To deactivate the function return the knob to
0
.
FAST BOILING FUNCTION
This function makes it possible to bring water to the boil fast; the fast boiling function remains active
for a preset time. At time elapsed the cooktop returns automatically to maximum power level. The fast
boiling function can be activated also once you have already started cooking.
Warning:
make sure you have placed the pan on the cooking zone before activating the fast boiling
function or the glass-ceramic surface may be damaged.
Specified performance values for the fast boiling function are guaranteed for all types of glassceramic
cooktops.
How to operate:
1.
Place the pan on the chosen cooking zone.
2.
Set
the knob to .
GENTLE HEAT FUNCTION
Can be used to prove dough, soften hard butter from the fridge, keep a baby's bottle or baby food
warm, for yoghurt making, softening chocolate, etc. This function is only available when the relative
cooking zone residual heat indicator light is switched off.
How to operate:
1.
Make sure the residual heat indicator light for the cooking zone you intend to use is switched off.
2.
Turn the knob to .
3.
To deactivate the function change the knob position.
COOKTOP FUNCTIONS
This symbol is not linked to an appliance function: the heating element is switched off.
  • Page 1 1
  • Page 2 2

Bauknecht ESNA 4462 WS Program Chart

Category
Hobs
Type
Program Chart

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI