Bauknecht ESN 3461/01 WS Program Chart

Bauknecht
Brand
Bauknecht
Model
ESN 3461/01 WS
Category
Hobs
Type
Program Chart

This manual is also suitable for

ESN 3461
PRODUCT DESCRIPTION SHEET
DE FR NL
5019 410 54631
0 Off
Oven light
BOTTOM HEATING FUNCTION
Use:
- To finish baking fruitcakes or cheesecakes.
- To thicken sauces.
Use the lower heating function for the last 10 or 15 minutes of cooking time.
STATIC FUNCTION
Use when all the food is on the same runner level.
- Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red
thermostat indicator light switches off.
- Ideally, the shelf should be on the second runner level when using the static function.
TOP HEATING FUNCTION
Use:
- To brown top surface of foods.
Use top heating function for the last 10-15 minutes of cooking time.
• Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature.
The red thermostat indicator light switches on.
• When the required temperature is reached, the red thermostat indicator light switches off.
End of cooking cycle:
Return the knobs to the OFF position (0 - •).
OVEN
First
Last
First... Last: runner positions
1. Control panel
2. Cooling fan (not visible)
3. Upper heating element
4. Oven light
5. Lower heating element (not visible)
6. Oven door hinges
7. Oven door
Accessories
:
•Grid
• Baking tray
CONTROL PANEL
1.
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Cooktop control knob (front left).
Functions: 0 1 ... 10 *
5.
Cooktop control knob (rear left).
Functions: 0 1 ... 10 *
6.
Cooktop control knob (rear right).
Functions: 0 1 ... 10 *
7.
Cooktop control knob (front right).
Functions: 0 1 ... 10 *
8.
Cooktop “ON” indicator light
*The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be
returned to their original positions.
N.B.: the cooling fan runs continuously at two different speeds according to the temperature
value of the components when the appliances are in use. Full speed: for high temperature of the
components. Half speed pulsing: for low temperature of the components. The pulsing speed
has to be considered a normal appliance condition at half speed. The fan may continue to run for
the time necessary to ensure sufficient cooling of the components and adjacent kitchen units after
the appliances have been switched off.
Important:
an optional kit consisting of an oven door glass and of relevant mounting components,
is available by the After-Sales Service. The use of the kit reduces the temperature of the outer oven surface
and is strongly recommended if there are kids in the house. Code N°: 4819 310 39186.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
The cooktop control knobs are marked with a numerical scale corresponding to different power
settings, and a series of function symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food can be kept warm when cooking is terminated.
How to operate:
1. Turn the knob to .
2. To deactivate the keep warm function, change the knob position.
DUAL ZONE FUNCTION (dependent on cooktop model)
This function is available on the front left and rear left cooking zones. The dual-zone function extends
the heated area of the cooktop so that you can use large, oval or rectangular pans.
How to operate:
1. Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start
flashing.
2. Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit
to show that the cooktop is switched on.
3. To deactivate the function return the knob to “0”.
FAST BOILING FUNCTION
This function makes it possible to bring water to the boil fast; the fast boiling function remains active
for a preset time. At time elapsed the cooktop returns automatically to maximum power level. The fast
boiling function can be activated also once you have already started cooking.
Warning: make sure you have placed the pan on the cooking zone before activating the fast boiling
function or the glass-ceramic surface may be damaged.
Specified performance values for the fast boiling function are guaranteed for all types of glass-ceramic
cooktops.
How to operate:
1. Place the pan on the chosen cooking zone.
2.
Set
the knob to .
GENTLE HEAT FUNCTION
Can be used to raise dough, soften hard butter from the fridge, keep a baby's bottle or a baby food
warm, for yoghurt making, melting chocolate, etc...
This function is only available when the relative cooking zone residual heat indicator light is switched off.
How to operate:
1. Make sure the residual heat indicator light for the cooking zone you intend to use is switched off.
2. Turn the knob to .
3. To deactivate the function change the knob position.
This symbol is not linked to an appliance function: the heating element is switched off.
COOKTOP FUNCTIONS
  • Page 1 1
  • Page 2 2

Bauknecht ESN 3461/01 WS Program Chart

Bauknecht
Brand
Bauknecht
Model
ESN 3461/01 WS
Category
Hobs
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents