NOTE: Read these installation instructions thoroughly before beginning. Retain these Installation
Instructions for future reference.
Arctic Cat
®
Prowler
Installation Instructions - Accessory Kit
Form No. 1453-092
Under Hood Storage Box Kit
(p/n 2436-246)
Kit includes:
p/n QTY DESCRIPTION
0417-014 6 Trim
0423-545 4 Shoulder Self-Tapping Screw
4506-037 1 Storage Box
8424-602 2 M6 Flange Nut
8476-616 2 M6 Machine Screw
1453-092 1 Instructions
1. Open the hood and remove the nine screws
securing the dash to the frame; then remove the
shift knob and pull the dash away from the
frame. See Fig. 1.
Fig. 1
ROV-514A
2. Remove the four screws securing the two hood
support brackets to the frame; then remove the
brackets. See Fig. 2.
Fig. 2
ROV-516A
3. Position Storage Box with the four mounting
locations from step 2 and the front two mount-
ing locations on the frame.
4. Install the six Trim pieces onto the rear raised
location on the storage box where the dash will
contact the box; then secure the box to the frame
using four Shoulder Self-Tapping Screws, two
M6 Machine Screws, and two M6 Flange Nuts.
Do not over-tighten. See Fig. 3.
Fig. 3
ROV-517A
5. Position the dash and secure using the existing
screws. Do not over-tighten. Close and latch the
hood.
Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1214