Extron electronics DTP2 T 211 User manual

Brand: Extron electronics

Model: DTP2 T 211

Type: User manual

This manual is also suitable for

DTP2 R 211

User Guide

DTP2T/R211

DTP Systems

HDMI Twisted Pair Transmitters and Receivers

68‑2938‑01 Rev. A

07 19

Safety Instructions

Safety Instructions • English

WARNING: This symbol, ,when used on the product, is

intended to alert the user of the presence of uninsulated dangerous

voltage within the product’s enclosure that may present a risk of electric

shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68‑290‑01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses

Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und

die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF‑Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron‑Richtlinien für Sicherheit und Handhabung (Artikelnummer

68‑290‑01) auf der Extron‑Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68‑290‑01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68‑290‑01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di importanti istruzioni di funzionamento

e manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68‑290‑01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,

zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część

numer 68-290-01, na stronie internetowej Extron, www.extron.com.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01。

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68‑290‑01) をご覧ください。

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (

), registered service marks (

), and trademarks (

) are the property of RGBSystems, Inc. or

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global

Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V‑Lock, VideoLounge, VN‑Matrix, VoiceLift, WallVault, WindoWall, XTP,

XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu‑RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto‑Image, AVEdge, CableCover, CDRS(ClassD

Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,

MAAP, MicroDigital, Opti‑Torque, PendantConnect, ProDSP, QS‑FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope‑Trigger,

ShareLink, SIS, SimpleInstructionSet, Skew‑Free, SpeedNav, Triple‑Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and

ZipCaddy

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause interference; correcting the interference is at the expense of the user.

ATTENTION:

• The Twisted Pair Extension technology works with unshielded twisted pair (UTP)

or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE

compliance, STP cables and STP Connectors are required.

• La technologie extension paires torsadées fonctionne avec les câbles paires

torsadées blindées(UTP) ou non blindées(STP). Afin de s’assurer de la

compatibilité entre FCC ClasseA et CE, les câbles STP et les connecteurs STP

sont nécessaires.

NOTES:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

X1&

X2)

X2#

X2!

}

NOTE: For commands and examples of computer or device responses mentioned

in this guide, the character "0" is used for the number zero and "O" is the capital

letter "o."

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viiDTP2 T/R 211 • Table of Contents

Contents

Introduction ................................................1

About this Guide .................................................. 1

About the DTP2211 Transmitter and Receiver .... 1

Control Communications ................................. 1

TP Cable Advantages ...................................... 2

Application Diagram ............................................ 2

Features .............................................................. 2

Installation and Operation............................5

Installation Overview ............................................ 5

Connections ........................................................ 6

Transmitter Rear Panel Connections ................ 6

Receiver Rear Panel Connections .................... 8

Securing the HDMI Connector ....................... 10

TP Cable Termination and

Recommendations ....................................... 11

Power Supply Wiring ..................................... 12

RS-232 and IR Connector Wiring .................. 14

Operations......................................................... 15

Front Panel Features ...................................... 15

Connecting to the Front Panel USB Port ........ 17

Resetting ....................................................... 18

Analog Audio Embedding (Transmitter) .......... 19

HDMI Audio De-embedding (Receiver) ........... 19

Remote Control .........................................20

Introduction to SIS ............................................. 20

Error Messages ............................................. 20

Timeout ......................................................... 20

Symbols Used in this Guide ............................... 21

Symbol Definitions ......................................... 21

Command and Response Table for SIS

Commands ...................................................... 22

Downloading and Updating Firmware ................ 24

Downloading Extron Firmware Loader ........... 24

Installing Firmware Loader ............................. 25

Downloading Firmware to a PC ..................... 25

Updating Firmware on a DTP2211 Device .... 26

Reference Information ...............................31

Mounting the Transmitter or Receiver ................. 31

Tabletop Use ................................................. 31

Mounting kits ................................................. 31

UL Rack-Mounting Guidelines ....................... 32

Internal Settings ................................................. 32

DTP2 T/R 211 • Table of Contents viii

DTP2 T/R 211 • Introduction 1

Introduction

• About this Guide

• About the DTP2211 Transmitter and Receiver

• Application Diagram

• Features

About this Guide

This guide describes the Extron DTP2211 long distance High Definition Multimedia Interface

(HDMI) Twisted Pair Extenders, which consists of a transmitter and receiver:

• DTP2T211 — 330feet (100meters) transmitter

• DTP2R211 — 330feet (100meters) receiver

This guide describes how to install, operate, and configure the transmitter and receiver.

About the DTP2211 Transmitter and Receiver

The Extron DTP2211 transmitter and receiver pair (see figure1 on the next page) extends

the usable distance of HDMI digital video with resolutions up to 4K@60Hz (4:4:4), analog

audio, remote power, and bidirectional RS-232 and infrared (IR) control signals over one

Extron XTPDTP24 shielded twisted pair (STP) cable (recommended), or Category CAT 6a,

or CAT 7 STP, or unshielded twisted pair (UTP) cable up to 330feet (100meters).

The DTP2211 devices extend the digital signal to Legacy DTP inputs 330feet

(100meters) with a maximum resolution of up to 4K @ 60Hz, 4:4:4, supporting data rates

up to 10.2Gbps.

The DTP2211 devices extend the digital signal to DTP2 inputs 330feet (100meters)

with a maximum resolution of up to 4K @ 60Hz, 4:4:4, supporting data rates up to

18Gbps.

Both units are HDMI(2.0b and 1.4) and HDCP(2.2 and 2.0) compliant. HDCP, EDID, and

CEC transmission is negotiated from source to sink.

• DTP2 transmitters feature configurable analog audio embedding that can be configured

via Simple Instructions Set (SIS) commands.

• DTP2 receivers feature configurable digital audio de-embedding, which can be selected

using the audio toggle switch on the rear panel.

The DTP2211 transmitter and receiver are housed in 1 inch tall, quarter rack width,

6inches deep metal enclosures. They can be set on a tabletop, mounted in a rack, or under

or through furniture. The receiver can also be mounted on a projector bracket.

Control Communications

The RS-232 and IR communications are passive pass-through only. The transmitter and

receiver do not generate or respond to the RS-232 and IR communication signals. HDCP,

EDID and CEC are negotiated from source to sink, with the transmitter and receiver

transparent during the exchange.

DTP2 T/R 211 • Introduction 2

TP Cable Advantages

Twisted pair cable is much smaller, lighter, more flexible, and less expensive than coaxial

or HDMI cable. These transmitter and receiver twisted pair (TP) products make cable runs

simpler and less cumbersome. Termination of the cable with RJ-45 connectors is simple,

quick, and economical.

ATTENTION:

• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201

cable to link the transmitter and receiver. The DTP2211 T/R do not work properly

with these cables.

• N’utilisez pas le câble audiovisuel Skew Free UTP version améliorée UTP23SF-4

Extron ou le câble STP201 pour relier l’émetteur et le récepteur/sélecteur. Le

DTP2211 T/R ne fonctionne pas correctement avec ces câbles.

Application Diagram

DTP HDMI 330 Rx

OVER DTP

RS-232

Tx Rx Tx RxG

L R

POWER

12V

0.7A MAX

AUDIO

SIG LINK

DTP IN

OUTPUTS

POWER

12V

0.3A MAX

IPL PRO S3

Tx Rx RTS CTS

COM 1 COM 2 COM 3

LAN / PoE

POWER

12V

--A MAX

AUDIO

INPUTS

SIG LINK

DTP

OUT

OVER DTP

RS-232

Tx Rx Tx RxG

INPUT

POWER

FAR END

OFF

STATUS

OUTPUT

LINK

DTP T HD 4K PLUS

CONFIG

RS-323 IR

Tx Rx Tx RxG

POWER

12V

--A MAX

AUDIO

OUTPUTS

OVER DTP

SIG LINK

DTP

INPUT

POWER

FAR END

OFF

STATUS

OUTPUT

LINK

DTP R HD 4K PLUS

CONFIG

MODEL 80

FLAT PANEL

Extron

DTP2 T 211

Transmitter

Extron

DTP2 R 211

Receiver

CATx Cable up to 330' (100 m) HDMIAudio

4K/HDR Display

PC with 4K/HDR Video Output

HDMI RS-232

RS-232

Extron

IPL Pro S3

IP Link Pro

Control Processor

WiFi

1 2 3 4

Figure 1. Typical DTP2 211 Transmitter and Receiver Application

Features

• Transmits HDMI plus control and analog audio up to 330 feet (100 meters) over

a shielded CATx cable — The DTP2T211 provides high reliability and maximum

performance on an economical and easily installed cable infrastructure.

• Receives HDMI plus control and analog audio up to 330 feet (100 meters) over

a shielded CATx cable — The DTP2R211 provides high reliability and maximum

performance on an economical and easily installed cable infrastructure.

• DTP R 211 inputs and output —

• Input: One DTP2 twisted pair input on RJ-45

• Outputs: One HDMI, stereo audio on captive screw

DTP2 T/R 211 • Introduction 3

• DTP T 211 inputs and output —

• Inputs: One HDMI, one 3.5 mm stereo mini jack for audio

• Output: One DTP2 twisted pair input on RJ 45

• Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of

4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.

• Stereo audio de-embedding (DTP R 211) — The captive screw stereo output is

selectable for de embedded or pass-through analog audio.

• Analog stereo audio embedding (DTP T 211) — Analog stereo audio signals can be

selectively embedded onto the digital video output signal and transported over DTP. The

DTP2 T 211 can be set to pass the embedded digital audio, embed the analog audio,

or to automatically embed the analog audio when no digital audio is detected.

• Accepts additional analog stereo audio signals — The DTP2 R 211 accepts stereo

analog audio from a DTP enabled product. The DTP2 T 211 accepts stereo analog

audio signals for simultaneous transmission over the same shielded twisted pair cable.

• Supported HDMI 2.0b specification features include data rates up to 18 Gbps,

HDR, Deep Color up to 12 bit, 3D, HD lossless audio formats, and CEC pass-

through

• Support for HDR (High Dynamic Range) video — Enables greater contrast range

and wider color gamut by providing the necessary video bandwidth, color depth, and

metadata interchange capability for HDR video.

• Supports EDID and HDCP transmission — DDC channels are actively buffered,

allowing continuous communication between source and display.

• Remote power capability — For simplified installation, the transmitter can be remotely

configured to provide power to the connected DTP2 receiver product.

• Supports Consumer Electronics Control (CEC) signal transmission — CEC

control passes through from the transmitter to the receiver.

• Bidirectional RS 232 and IR pass-through for AV device control — Bidirectional

RS 232 control and IR signals can be transmitted alongside the video signal, allowing

remote AV devices to be controlled without the need for additional cabling.

• Supports multiple embedded audio formats — Compatible with a broad range of

multi-channel audio signals, providing reliable operation with HDMI sources.

• Front panel USB configuration port — Provides convenient access for information

and firmware updates.

• LED indicators for signal presence, power, and link status — Provide visual

indication of system status for real-time feedback and monitoring of key performance

parameters.

• RJ 45 signal and link LED indicators for DTP port — Provide a means for validating

signal flow and operation, allowing quick identification of connectivity issues

• 1-inch high, quarter rack width, metal enclosures — With low profile enclosures,

the transmitter and receiver can be discreetly installed in locations such as behind a

plasma or LCD flat-panel display.

• Includes LockIt HDMI cable lacing brackets — LockIt lacing brackets are used to

secure HDMI cables connected to the HDMI input and output connectors, preventing

accidental disconnection of the cables.

• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for

optimal performance.

DTP2 T/R 211 • Introduction 4

• Compatible with CATx shielded twisted pair cable — The DTP2R211 and

DTP2T211 fully support a maximum transmission distance of 330 feet (100 meters)

for all compatible resolutions when used with CATx shielded twisted pair cable.

Shielded twisted pair cabling with solid center conductor sizes of 24AWG or better is

recommended for optimal performance.

• External Extron Everlast power supply included (with the transmitter only) —

Provides worldwide power compatibility with high-demonstrated reliability and low

power consumption.

• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty.

DTP2 T/R 211 • Installation and Operation 5

Installation and

Operation

This section describes the installation and the operation of the DTP2211 transmitter and

receiver, including:

• Installation Overview

• Connections

• Operations

Installation Overview

To install and set up the DTP2211 transmitter and receiver:

1. Turn off all equipment and disconnect it from the power source.

2. Mount the transmitter and receiver (optional) on a rack shelf or furniture (see

Mounting the Transmitter or Receiver on page31).

3. Connect an HDMI input source to the DTP2T211 input (see figure2,

page6).

4. Connect an HDMI output device to the DTP2R211 HDMI output (see figure3,

page8).

NOTE: LockIt cable lacing brackets are provided to secure the HDMI cables to the

port to reduce stress on the HDMI connectors and prevent signal loss due to loose

cable connections (see Securing the HDMI Connector on page10).

5. Connect the transmitter DTP2 Out RJ-45 port (see figure2,

) to the receiver

DTP2 In RJ-45 port (see figure3,

) using a Twisted Pair Cable.

6. Connect an unbalanced stereo audio source to the 3.5 mm mini stereo input on

the DTP2T211 (see figure2,

) for an analog audio input.

7. Connect a balanced or unbalanced stereo or mono audio device to the

DTP2R211 via the Audio captive screw output (see figure3,

8. Set the Audio configuration toggle switch (see figure3,

) on the DTP2R211

to the UP position to de-embed digital audio from the HDMI signal and output it to the

captive screw output for analog audio output. Set the Audio configuration toggle

switch to the DOWN position for the analog input from the TRS audio port on the Tx unit

to be transported simultaneously with the digital embedded HDMI audio and output on

the captive screw output (see figure3,

9. Connect a serial RS-232 signal, a modulated IR signal, or both into this 3.5mm,

5-pole captive screw Over DTP port for bidirectional RS-232 and IR communication

(see figure2,

on the transmitter and figure3,

on the receiver).

10. Connect control devices. Connect your computer to the front panel Configuration

port (see figure8,

on the transmitter and receiver) to configure and control the

transmitter and receiver via SIS commands.

11. Power on the output display.

DTP2 T/R 211 • Installation and Operation 6

12. In a DTP2 transmitter to DTP2 receiver configuration, set the SEND POWER

toggle switch to the UP position on the powered DTP2 device to enable sending

remote power to the far end DTP2 device. Set the toggle switch to the DOWN position on

the DTP2 device receiving power (see figure8,

on page15).

ATTENTION:

• The DTP2211 device is configured to output power to DTP2 models only. If

connected to a Legacy DTP device, set the toggle switch to the DOWN (OFF)

position. Failure to turn the power OFF will damage the connected Legacy DTP

device.

• Le DTP2211 est conﬁguré pour fournir une alimentation aux modèles

DTP2 uniquement. S’il est connecté à un autre appareil, veuillez positionner

l’interrupteur à bascule sur « DOWN » (OFF). Si l’interrupteur n’est pas positionné

sur OFF, vous risquez d’entraîner la défaillance de l’appareil Legacy DTP

connecté.

13. Connect power to the transmitter or receiver.

14. Power on the source devices.

After the transmitter, the receiver, and their connected devices are powered up, the system

is fully operational. If any problems are encountered, ensure all cables are routed and

connected properly.

NOTE: Ensure the video source and display selected for the DDC are properly

connected to the transmitter and receiver pair, and the transmitter, receiver, and display

have power applied before power is applied to the video source. If the other devices

are not turned on before the video source, the image may not appear.

Connections

Transmitter Rear Panel Connections

INPUTS

POWER

12V

0.8A MAX

SIG LINK

DTP2 OUT

OVER DTP2

RS-232

Tx Rx Tx RxG

AUDIO

AA BB CC DD EE

Power inlet

Audio input

HDMI input

DTP2 Output RJ-45 port

Over DTP2 RS-232 and IR port

Figure 2. DTP2T211 Transmitter Connectors

Power inlet — Plug the included external 12VDC power supply into either this 2-pole

inlet or the power inlet on the receiver (see figure3,

, on page8, and Power

Supply Wiring on page12 to wire the connector).

NOTES:

• One power supply is included with the transmitter and can normally power

both units. Remote power is only available if both the transmitter and the

receiver are from the ExtronDTP2 series.

• The power supply can be plugged into either the transmitter or the receiver to

power both units.

• If the internal jumper setting for ground is removed, a DTP2 211 unit cannot

remotely power the other unit, because of ground potential differences. Each

unit requires a local power supply (see Internal Settings on page32).

DTP2 T/R 211 • Installation and Operation 7

Audio input (Optional)— (see figure2 on the previous page) Plug an analog audio

input into the transmitter via this female 3.5mm TRS stereo connector (see Analog

Audio Embedding (Transmitter) on page19).

NOTE: The analog audio input is in addition to the

digital audio that may be embedded in the HDMI

input (see the ﬁgure at right to identify the connector

tip, ring, and sleeve).

• A mono audio connector consists of the tip and

sleeve.

• A stereo audio connector consists of the tip, ring,

and sleeve.

Sleeve ( )

Ring (

)

Tip (+)

3.5 mm Stereo Plug Connector

(balanced)

HDMI input — Connect an HDMI cable between this port and the HDMI output port (or

DVI port, with an appropriate adapter) of the digital video source.

NOTE: See Securing the HDMI Connector on page10 to securely fasten the

HDMI connector to the transmitter and the receiver.

DTP2 Out RJ-45 port — Connect one end of a TP cable to this RJ-45 port on the

transmitter. Ensure the opposite end of this cable is connected to the receiver DTP2

Input RJ-45 port (see figure3,

on the next page).

• Signal LED — This green LED indicates the unit is receiving a TMDS clock signal

on the HDMI input.

• Link LED — This amber LED indicates a valid link is established between the units

on the DTP input and output cable.

ATTENTION:

• Do not connect these devices to a telecommunications or computer data

network.

• Ne connectez pas ces appareils à un réseau de télécommunications ou de

données informatiques.

NOTE: See TP Cable Termination and Recommendations on page11 to

properly wire the RJ-45 connectors and detailed NOTES on page9.

Over DTP2 RS-232 and IR port — Connect a serial RS-232 signal, a modulated IR

signal, or both to this 3.5mm, 5-pole captive screw port for bidirectional RS-232 and

IR communication (see RS-232 and IR Connector Wiring on page14 to wire the

connector).

DTP2 T/R 211 • Installation and Operation 8

Receiver Rear Panel Connections

OUTPUTS

POWER

12V

0.8A MAX

SIG LINK

DTP2 IN

RS-232

Tx Rx Tx RxG

AUDIO

OVER DTP2

AA BB CC DD EE FF

Power inlet

Over DTP2 RS-232 and IR port

DTP2 In RJ-45 port

HDMI output

Audio configuration toggle switch

Audio output

Figure 3. DTP2211 Receiver Connectors

Power inlet — Plug the included external 12VDC power supply into either this 2-pole

inlet or the power inlet on the transmitter (see figure2,

, on page6, and Power

Supply Wiring on page12 to wire the connector).

NOTES:

• One power supply is included with the transmitter and can normally power

both units. Remote power is only available if both the transmitter and the

receiver are from the ExtronDTP2 series.

• The power supply can be plugged into either the transmitter or the receiver to

power both units.

• If the internal jumper setting for ground is removed, a DTP2 211 unit cannot

remotely power the other unit, because of ground potential differences. Each

unit requires a local power supply (see Internal Settings on page32).

Over DTP2 RS-232 and IR port — Connect a serial RS-232 signal, a modulated IR

signal, or both to this 3.5mm, 5-pole captive screw port for bidirectional RS-232 and

IR communication (see RS-232 and IR Connector Wiring on page14 to wire the

connector).

DTP2 In RJ-45 port — Connect one end of the TP cable from the transmitter output

to this RJ-45 port. Ensure the opposite end of this cable is connected to the transmitter

DTP2 Output RJ-45 port (see figure2,

• Signal LED — This green LED indicates the unit is receiving a valid signal on the

DTP In port.

• Link LED — This amber LED indicates a valid link is established between the units

on the DTP input and output cable.

NOTE: See TP Cable Termination and Recommendations on page11 to

properly wire the RJ-45 connectors and detailed NOTES on page11.

HDMI output — Connect a display with an HDMI input port (or DVI input port, with an

appropriate adapter) to display the transmitted digital image.

NOTE: See Securing the HDMI Connector on the next page to securely fasten

the HDMI connector to the transmitter and the receiver.

Audio configuration toggle switch —

• Set the toggle switch to the UP position to de-embed digital audio from the HDMI

signal and output it to the captive screw output for analog audio output.

NOTE: If the HDMI source audio is in a multi channel format, the audio cannot

be extracted on the receiver. If the toggle switch is set to the UP position,

the analog audio output will be muted, but the audio still passes through the

HDMI output.

DTP2 T/R 211 • Installation and Operation 9

• Set the toggle switch to the DOWN position for the analog input from the TRS audio

port on the Tx unit to be transported simultaneously with the digital embedded

HDMI audio and output on the captive screw output (see figure3,

page8) (see HDMI Audio De-embedding (Receiver) on page19).

Audio output — This 5-pole, 3.5mm captive screw connector outputs the transmitted,

unamplified, line level analog audio. Connect a balanced or unbalanced stereo or mono

audio device, such as an audio amplifier or powered speakers (see figure3).

See figure4 to properly wire a captive screw output connector. Use the supplied

tie-wrap to strap the audio cable to the extended tail of the connector.

Balanced Audio Output

Tip

Ring

Tip

Ring

Sleeves

Unbalanced Audio Output

Tip

No Ground Here

Tip

Sleeves

Do not tin the wires!

Figure 4. Captive Screw Connector Wiring for Stereo Audio Output

NOTE: See the Attention notiﬁcations before wiring the captive screw connector.

ATTENTION:

• For unbalanced audio, connect the sleeves to the ground contact. DO NOT

connect the sleeves to the negative (–) contacts.

• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne PAS

connecter les manchons aux contacts négatifs (–).

• Do not tin the wire leads before installing into the connector. Tinned wires are

not as secure in the connector and could be pulled out.

• Ne pas étamer les conducteurs avant de les insérer dans le connecteur. Les

câbles étamés ne sont pas aussi bien fixés dans le connecteur et pourraient

être tirés.

• The length of the exposed wires in the stripping process is important. The

ideal length is 3/16inch (5mm). Any longer and the exposed wires may

touch, causing a short circuit between them. Any shorter and the wires can be

easily pulled out even if tightly fastened by the captive screws.

• La longueur des câbles exposés est importante lorsque l’on entreprend de

les dénuder. La longueur idéale est de 5mm (3/16inches). S’ils sont

trop longs, les câbles exposés pourraient se toucher et provoquer un court-

circuit. S’ils sont trop courts, ils peuvent être tirés facilement, même s’ils sont

correctement serrés par les borniers à vis.

DTP2 T/R 211 • Installation and Operation 10

Securing the HDMI Connector

Follow these instructions to secure the input and output connectors to the transmitter and

receiver with the LockIt HDMI lacing bracket provided:

Plug the HDMI cable into the rear panel connection.

Loosen the HDMI connection mounting screw from

the rear panel enough to allow the LockIt lacing

bracket to be placed over it. The screw does not

have to be removed.

Place the LockIt lacing bracket on the screw and

against the HDMI connector, then tighten the screw

to secure the bracket.

ATTENTION:

• Do not overtighten the HDMI connector

mounting screw. The shield it fastens to is

very thin and can easily be stripped.

• Ne serrez pas trop la vis de montage du

connecteur HDMI. Le blindage auquel elle

est attachée est très fin et peut facilement

être dénudé.

Loosely place the included tie wrap around the

HDMI connector and the LockIt lacing bracket as

shown.

While holding the connector securely against the lacing bracket, tighten the tie wrap,

then remove any excess length.

DTP2 T/R 211 • Installation and Operation 11

TP Cable Termination and Recommendations

The TIA/EIA T 568B wiring standard is detailed in figure5. Use this standard to terminate

TP cables with RJ-45 connectors.

Side

12345678

Insert

Twisted

Pair Wires

Pins:

RJ-45

Connector

Wire color

White-green

Green

White-orange

White-blue

Orange

White-brown

Brown

Blue

TIA/EIA T

568 B

Figure 5. TP Cable Termination

ATTENTION:

• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201

cable to link the XTP products or with DTP2 transmitters or receivers. The

DTP2211 does not work properly with these cables.

• N’utilisez pas le câble audiovisuel Skew-Free UTP version améliorée UTP23SF-4

Extron ou le câble STP201 pour relier les produits XTP à des émetteurs ou

récepteurs DTP2. Le DTP2 211 ne fonctionne pas correctement avec ces câbles.

Supported cables —

The DTP2211 transmitter and receiver are compatible with CAT 6a, and CAT 7 shielded

twisted pair (F/UTP, SF/UTP, and S/FTP) and unshielded twisted pair (U/UTP) cable.

Cable recommendations —

Extron recommends using the following practices to achieve full transmission distances up

to 330feet (100meters) and reduce transmission errors.

• Use the following Extron XTPDTP24SF/UTP cables and DTP 24 connectors for the

best performance:

• XTPDTP24/1000 Non-Plenum 1000feet (305meters) spool

• XTPDTP24P/1000 Plenum 1000feet (305meters) spool

• XTPDTP24 Plug Package of 10

• If not using XTPDTP24 cable, at a minimum, Extron recommends 24AWG, solid

conductor, STP cable with a minimum bandwidth of 400MHz.

• Terminate cables with shielded connectors to the TIA/EIAT568B standard.

• Use no more than two pass-through points, which may include patch points, punch

down connectors, couplers, and power injectors. If these pass-through points are

required, use CAT6 or 6a shielded couplers and punch down connectors.

NOTES: When using CAT 6a and CAT 7 cable in bundles or conduits, consider the

following:

• Do not exceed 40% fill capacity in conduits.

• Do not comb the cable for the first 65feet (20meters), where cables are straightened,

aligned, and secured in tight bundles.

• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.

• Separate twisted pair cables from AC power cables.

DTP2 T/R 211 • Installation and Operation 12

Power Supply Wiring

A 12VDC, 1.5Apower supply is provided with the DTP2211 transmitter. Follow these

instructions to wire the 2-pole captive screw connector to your power supply:

CAUTION: Risk of minor personal injury:

ATTENTION : Risque de blessuremineure :

• The DC output cables must be kept separate from each other while the power

supply is plugged in. Remove power before wiring.

• Les câbles de sortie CC doivent être séparés les uns des autres tant que la

source d’alimentation est branchée. Coupez l’alimentation avant d’effectuer les

raccordements.

ATTENTION:

• Do not connect any external power supplies until you have read the ATTENTION

notifications on the next page.

• Veuillez lire les encadrés « Attention » sur la page suivante avant de brancher une

source d’alimentation externe.

NOTES:

• One power supply is included with the transmitter and can normally power both

units, if they are both from the Extron DTP2 series.

• If the ground jumper (JMP 2) is Open (Off), (see Internal Settings on page32)

because of ground potential differences, one DTP2211 unit cannot remotely

power the other unit. Each unit requires a local power supply.

See figure6 to wire the captive screw connector and secure the power cord to the

extended tail of the connector.

SECTION A–A

Ridges

Smooth

3/16"

(5 mm) Max.

POWER

12V

--A MAX

Figure 6. Power Connector Wiring

1. Cut the DC output cord to the length needed.

2. Strip the jacket to expose 3/16inch (5mm) of the conductors.

3. Slide the leads into the supplied 2-pole captive screw plug and secure them, using a

small screwdriver.

4. To verify the power cord polarity before connecting the plug, connect the power supply

with no load and check the output with a voltmeter.

5. Use the supplied tie wrap to strap the power cord to the extended tail of the connector.

Page is loading ...

Extron electronics DTP2 T 211 User manual

Brand: Extron electronics

Model: DTP2 T 211

Type: User manual

This manual is also suitable for

DTP2 R 211

Download PDF

report

in other languages

français: Extron electronics DTP2 T 211 Manuel utilisateur

Extron electronics DTP2 T 211 User manual

This manual is also suitable for

Extron electronics DTP2 T 211 User manual

in other languages

Related papers

Other documents