2. Computers & electronics
  3. Networking
  4. Modems
  5. Arvig
  6. GigaSpire

Arvig GigaSpire User guide

  • Hello! I have reviewed the user guide for the Arvig GigaSpire BLAST u4 WiFi router. This document provides a quick start guide for setting up the device, including connecting the ethernet cable, powering it on, and using the app for WiFi setup. I'm ready to answer your questions about the setup process or any other details mentioned in the guide.
  • What does the solid blue light indicate?
    How do I set up my WiFi?
    How long does the boot-up process take?
2
Connect GigaSpire BLAST
to power outlet.
Ethernet
QUICK START GUIDE:
GigaSpire BLAST u4 Setup
Need help?
877.290.0560 | arvig.net/managedwi
The solid blue light indicates SUCCESS!
You are connected to the internet.
Refer to the Quick Start Guide for the app
to set up your WiFi.
3
4
Based on Arvig service area; some restrictions apply. ©Arvig 2022 Item262
Connect one end of the
supplied Ethernet cable to
one of the LAN ports found
on the back of the internet
access device provided by
your service provider (e.g.,
modem or ONT) and the
other end of the cable to the
WAN port on the back of the
GigaSpire BLAST.
1
Boot-up-time is
about 4 minutes.
/