2. WESTMAN
  3. CODA-45
CODA-45

WESTMAN CODA-45 User guide

  • Hello! I've reviewed the Self-Connect Guide for the CODA-45 modem and GigaSpire BLAST u6 router. This guide includes clear instructions for connecting your devices, checking their status, and setting up your Wi-Fi using the CommandIQ app. I'm ready to assist with any questions you might have about these steps or other features described in the document.
  • What should I do first when connecting the modem?
    How do I know if the modem is online?
    What do I connect to the yellow LAN Port 1 on the modem?
Wi-Fi Modem
Self-Connect Guide
CODA-45 & GigaSpire BLAST u6
Wi-Fi Modem Self-Connect Guide
What’s in the kit.
Connect Your Modem
Connect the supplied coaxial cable to the wall plate.
Connect the other end of the coax cable to the modem.
Tighten connectors rotating clockwise until securely fastened.
Power on Your Modem
Plug in the supplied power cord to the modem.
Plug the other end of the power cord into the wall.
The lights should come on.
Modem
(Hitron CODA-45)
Router
(Calix GigaSpire)
Coax
Cable
Ethernet
Cord
Power Cords
(Specic for each)
Coax Cable
Wall Plate
Ethernet
(LAN) Port 1
Reset Coax
Cable Port
Power Port
(12v 1.5a power supply)
2
1
Conrm Modem is Online
Wait until 2 lights are solid blue. This may take up to 10 minutes.
3
4Connecting Your GigaSpire BLAST Wi-Fi Router
Plug in the power adapter shipped with the
GigaSpire to an available wall socket and attach
the other end to the GigaSpire’s power port.
Connect one end of the supplied Ethernet cable to
the Yellow LAN Port 1 on the back of the CODA-45
internet modem and the other end of the cable to
the WAN port on the back of the GigaSpire.
Once the light is solid blue, and you are able to see the
WCG-***** SSID with your Wi-Fi devices, initial setup is complete.
Note: The SSID (network name) of your
new GigaSpire will update from CXNK-
******* to WCG-******** when the system
has updated. The password remains the
default setting; as found on the bottom
of your GigaSpire beside ‘WPA Key’.
204.725.4300 1.800.665.3337 westmancom.com
Get the CommandIQTM App to set up Wi-Fi
Please refer to the CommandIQ User Guide.
6
Connect CAT5 or better cabling to the yellow LAN Ethernet
(RJ-45) ports for direct-attached devices.
Secure all subscriber service wiring as appropriate.
Please visit support.westmancom.com and search for
“self-connect” for more info, or call our support team
at 204.717.2802 or 1.800.665-3337.
We’re here to help.
5Connecting Hardwired Devices
Power Adapter
(12v 2.5a power supply)
Ethernet WAN Cable
Ethernet Cable
/