RGBlink MVP8043 Quick start guide

MVP 8043 Quick Start

VIEWSIZE THE WORLD

 8 Display Windows Multiviewer

 4 HD/3G SDI Inputs

 8 Pictures, 10 Pictures Preview

 Program and Preview Outputs by DVI and SDI

 Genlock Reference Input for Multiple Sync

 Multiple Seamless Mapping by Stack up

 Local Operation and Rotary Knob for Fade

Speed Control

 Remote Control by USB, TCP/IP

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

1

CONTENT

Product Introduction ............................................................................................................................... 2

Packing Configuration ............................................................................................................................ 3

Hardware Orientation .............................................................................................................................. 4

Front Panel ......................................................................................................................................... 4

Back Panel ......................................................................................................................................... 5

System Operation .................................................................................................................................... 6

Content ............................................................................................................................................... 6

How to Choose the Language on the LCD ................................................................................. 7

How to Adjust the Output Resolution .......................................................................................... 8

How to Realize Signal Switching ................................................................................................ 9

How to Set up the Size and Position of Single Image ................................................................ 9

How to Crop Input Image ............................................................................................................ 9

How to Realize Genlock ............................................................................................................ 10

How to Switch Between Preview and Program ........................................................................ 10

How to Realize Preview Image Full Display ............................................................................. 11

How to Select Move Effects Switching ..................................................................................... 11

How to Save the Parameter ...................................................................................................... 12

How to Load the Saved Parameter ........................................................................................... 12

Product Application ............................................................................................................................... 13

Application 1: 14 Channel Input, 8 Image Preview and Seamless Switching ................................. 14

Application 2: 8 Channel Input, 8 Image Preview, Seamless Switching and Split........................... 17

Contact Information............................................................................................................................... 19

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

2

Product Introduction

MVP 8043 is a pure-hardware professional

multi-screen video wall controller, which is capable

of showing and displaying multi-dynamic pictures

on multi-screens to realize the function of splicing

multi-windows.

It supports signal input, including SDI (SD/HD-SDI,

3G-SDI), high-definition digital signal (HDMI or

high resolution DVI signal). Single output channel

supports maximum resolution 2560×816@60Hz.

It is specially designed for the needs for

displaying multi-pictures with high quality,

especially suitable for flexibly controlling

various types of screens and resolutions. MVP

8043 is ideal for the application in command

centers, video conference, and multi-media

hall.

System Connection

RGBlink offers solutions to

demanding technical problems.

Any application questions, or

required further information,

please contact with our

customer Support Engineers.

MVP 8043 System Connection Diagram

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

3

Packing Configuration

Note: The color of the screw driver is randomly when packing.

Power Cord

USB Cable

Network Cable

DVI-D Cable

DVI 转 HDMI 线

USB Disk

Screw Driver

防静电袋

Certification

SDI Cable

Antistatic Bag

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

4

Hardware Orientation

Front Panel

Button Instruction

MENU

Menu button

LOAD

Load button

INF

Information display button

DVI1~DVI4

DVI signal source button

PAD LOCK

Key lock button

SDI1~SDI4

SDI signal source button

SCALE

Scale button

0~9

Number button, use for scale, crop

and custom setting

CROP

Crop button

BLACK

Black button

FS

Full screen switch button

TP

Test pattern button

FREEZE

Freeze button

ALPHA

Effect switch button

GEN

LOCK

Signal synchronization button

MOVE1,

MOVE2

Move effect shortcut button

OUT

Output Format select button

TAKE

Signal, Black and Effect switch button

MODE

Preview image full display button

LCD Panel

Show operation menu items

SAVE

Save button

Knob

Confirm and adjust LCD menu

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

5

Back Panel

Input Interface

1~4

DVI Input DVI-I port

9~12

3G-SDI input BNC port

13

Genlock Input BNC port

Output Interface

5

Preview SDI Output BNC port

6

Program SDI Output BNC port

7

Preview DVI Output DVI-I port

8

Program DVI Output DVI-I port

other Interface

14

10/100M Interface RJ45

15

USB Interface USB-B

16

Power

17

Upgrade Button

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

6

System Operation

Content

 How to Choose the Language on the LCD

 How to Adjust the Output Resolution

 How to Realize Signal Switching

 How to Set up the Size and Position of Single Image

 How to Crop Input Image

 How to Realize Genlock

 How to Switch Between Preview and Program

 How to Realize Preview Image Full Display

 How to Select Move Effects Switching

 How to Save the Parameter

 How to Load the Saved Parameter

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

7

How to Choose the Language on the LCD

The language in menu is optional, it includes Chinese, English, etc. English is the default language.

Following is the operation for how to change Chinese to English, and the opposite applies as well.

1. Push the [MENU] button to enter menu items.

2. Turn the knob and choose <System> option.

3. Push the knob to confirm, LCD displays “Language”.

4. Push the knob to confirm, turn the knob and choose <English>, push the knob to confirm,

and change “Chinese” to “English”.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

8

How to Adjust the Output Resolution

1. Push the [MENU] button to enter menu option.

2. Turn the knob and choose <Output>, push the knob to confirm, and enter next level menu.

3. Choose <Program>, and enter <Program Format>, push the knob to confirm.

4. Choose the output resolution, push the knob to confirm, and finish the choice of resolution.

User can also custom the resolutions according to actual need. And the operations are as follows:

1. Push the [MENU] button to enter menu option.

2. Turn the knob and choose <Output>, push the knob to confirm, and enter next level menu.

3. Choose <Program>, and enter <Program Custom Format>, push the knob to confirm.

4. Turn the knob on each bit position, and change the value of the bit by the digital buttons on the

front panel.

5. After the digital push knob will add ×, means before × is the horizontal size. Same operation

for vertical size.

6. After the digital push knob will add @, means before @ is the vertical size. Same operation

by push the digital buttons to set the refresh rate.

8. After input all the values, push the knob to enable MVP 8043 to output this resolution. MVP 8043

will take 5 to 10 seconds to enable this output resolution.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

9

How to Realize Signal Switching

1. System default DVI1 to the current input source (key lights) when boot.

2. If need switch to other source such as SDI1, push the SDI1 button, key flashes, again push the

[TAKE] button, SDI1 key lights, and switch SDI1 to Program output.

3. After choose SDI1 signal, the former button DVI1 flashes, and SDI1 key lights, it realize the

input signal switching (Switch input signal DVI1 to SDI1).

Same with above, switch DVI2, DVI3, DVI4, SDI2, SDI3, SDI4.

How to Set up the Size and Position of Single Image

1. Push the [SCALE] button to enter menu option.

2. Choose the item to set, push the knob to confirm, it is selected when appear “*” before

the item need to set.

3. Turn the knob or push the number button to set the value.

4. Push the knob to confirm, and finish the setting.

How to Crop Input Image

1. Push the [CROP] to enter menu option.

2. Choose the item and push the knob to confirm, it is selected when appear “*” before

the item need to set.

3. Turn the knob or push the number button to set the value.

4. Push the knob to confirm, and finish the crop setting.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

10

How to Realize Genlock

1. Input sync signal from controller or signal generator.

2. Push the [GENLOCK] button, key lights, the output will be sync to the reference input timing. Each

time the button push, will sync to the reference input once.

When push the [GENLOCK] button again, the function is cancel, and the sync signal has no effect on

the device.

How to Switch Between Preview and Program

1. System default DVI1 to the current input source (key lights) when boot.

2. Choose any other signal, for example, DVI2, DVI2 button flashes, red frame of DVI2

corresponding image flashes, and the image is in Preview state.

3. Push the [TAKE] button, DVI2 key light is on, and it is switched to Program output and the former

DVI1 key flashes. red frame of DVI1 corresponding image flashes, the image is in Preview state.

Same with above, it can realize the preview and program switching among DVI3, DVI4, SDI1, SDI2,

SDI3, SDI4.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

11

How to Realize Preview Image Full Display

1. Choose Preview signal, for example: DVI2, DVI2 key flashes, red frame of DVI2 corresponding

image flashes, and the image is in Preview state.

2. Push the [MODE] button, MODE key light is on, and the Preview image is full displayed:

3. Push the [MODE] button again, MODE key light is off, and exit the full display.

How to Select Move Effects Switching

1. Push the [MENU] button to enter to the menu option.

2. Turn the knob and choose <Effect>, push the knob to confirm, and enter to next level menu.

3. Turn the knob and choose Move1 or Move2, for example, choose Move1.

4. Push the knob to confirm, turn the knob and choose move effect.

5. Push the knob to confirm and finish MOVE1 effect shortcut setting, push the [MOVE1] button,

and then push the [TAKE] button, it can achieve MOVE1 effect switching.

6. Same with above, set the MOVE2 effect switching.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

12

How to Save the Parameter

MVP 8043 provides ten save modes, operations are as follows:

1. Push the [SAVE] button, the key light is on, and enable the save function.

2. DVI1, DVI2, DVI3, DVI4, SDI1, SDI2, SDI3, SDI4, BLACK, TP lights are on at the same time.

3. The numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 are corresponding save mode 1~10, select the number to save

the current user data. For example, push button [1], and save the parameter to SAVE 1.

How to Load the Saved Parameter

MVP 8043 provides ten load modes, operations are as follows:

1. Push the [LOAD] button, the key light is on, and enable the LOAD function.

2. DVI1, DVI2, DVI3, DVI4, SDI1, SDI2, SDI3, SDI4, BLACK, TP lights are on at the same time.

3. The numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 are corresponding load mode 1~10, select the number to load

the saved parameter. For example, push button [1] to load from SAVE 1.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

13

Product Application

Combined with RMS 8424, 2 pieces of VSP 168S and DV4, MVP 8043 can support eight images

preview and seamless switching, and installed in a 8U air box. Besides 8 images preview, RMS 8424

can also support LED Display preview. And there are two different applications for this scheme.

Application 1: Format conversion and seamless switching, convert signal format by inputting signal to

VSP 168S, and then output to MVP 8043.

Application 2: Seamless switching and split, super resolution of LED Display, do cascade with VSP

168S if need.

Scheme

Configuration List

No.

Model

Name

Quantity

1

MVP 8043

8 channel input and seamless switching processor

1

2

VSP 168S

LED Display video processor

2

3

RMS 8424

Standard 4U rack mount monitor

1

4

DV4

DV4 Sending Card Install Case

1

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

14

Application 1: 14 Channel Input, 8 Image

Preview and Seamless Switching

Connection

Advantage

1. Input 14 channel signals, it can achieve 8 image preview and seamless switching with MVP 8043,

and signal format conversion with VSP 168S, it also can add 2 × CVBS, 2 × VGA/YPbP, 2 ×

DVI/HDMI, 2 × SDI.

2. Enable the PIP function in VSP 168S, and switch between single image and double images.

8 Image Preview and Single Image Switching

Convert the VGA signal of laptop, CVBS signal of DVD and set top box, SDI signal of HD camera, DVI

signal of desktop to DVI signal with VSP 168S, then connect to MVP 8043. MVP 8043 support 8 image

preview and seamless switching.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

15

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

16

8 Image Preview and Single and Double Images Switching

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

17

Application 2: 8 Channel Input, 8 Image

Preview, Seamless Switching and Split

Connection

Advance

Application 2 is mainly for LED Display super resolution. If need do split, input signal to MVP 8043 to do

8 image preview and seamless switching, then split with 2 pieces of VSP 168S, and connect sending

card to LED Display.

8 Image Preview and Switching

MVP 8043 can input 8 channel signal. Output SDI preview to the first RMS 8424S, and output SDI

program to the second RMS 8424S for 8 image preview and LED timely monitor. Connect DVI program

to the HDMI LOOP of the first VSP 168S, and connect the HDMI LOOP of the first VSP 168S to the

HDMI IN of the second VSP 168S, split with VSP 168S, and then output to LED Display.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

18

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

19

Contact Information

Warranty:

All video products are designed and tested to the highest quality standard and backed by

full 3 years parts and labor warranty. Warranties are effective upon delivery date to

customer and are non-transferable. RGBlink warranties are only valid to the original

purchase/owner. Warranty related repairs include parts and labor, but do not include

faults resulting from user negligence, special modification, lighting strikes,

abuse(drop/crush), and/or other unusual damages.

The customer shall pay shipping charges when unit is returned for repair.

Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial Development Zone

Xiamen, Fujian Province, P.R.C

● Tel: +86-592-5771197

● Fax: +86-592-5771202

● Customer Hotline: 4008-592-315

● Web:

~ http://www.rgblink.com

~ http://www.rgblink.cn

● E-mail: support@rgblink.com

RGBlink MVP8043 Quick start guide

RGBlink MVP8043 Quick start guide

Related papers

Other documents