HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) User guide

Brand: HPE

Model: 5960 400G Pwr2Prt BF Fan Tray (R9Y17A)

Type: User guide

About the fan tray

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) provides power supply side-intake and

port side-exhaust airflow and delivers high cooling efficiency. It is small, hot swappable,

and can automatically adjust the fan speed based on the device temperature.

Installing or removing the fan tray

Installing the fan tray

Specifications

Views

• Before you install or remove the fan tray, wear an ESD wrist strap and make sure the

wrist strap has good skin contact and is reliably grounded.

• Do not touch any bare wire or terminal.

• Do not place the fan tray in a damp environment and prevent liquid from flowing into the fan tray.

• When an internal circuit or component is faulty, do not remove any components from the fan

tray. Contact HPE Support.

• Before you install the fan tray, make sure the fan tray model is compatible with the device

and the airflow direction matches the airflow design at the installation site.

• To avoid damaging the fan tray and the backplane connector, insert the fan tray slowly. If you

encounter a resistance or the fan tray tilts when you insert it, remove the fan tray and reinsert it.

Removing the fan tray

• Ensure electricity safety when you remove the fan tray on an operating device.

• Never touch the fan tray when it is rotating.

• To prevent an unbalanced fan from causing loud noise, do not touch the fan blades or

rotation axis, even if it is not rotating.

• Place the removed fan tray on an anti-static mat or put it into an anti-static bag.

Dimensions (H × W × D, including the handle )

Airflow direction

Max fan speed

Max airflow

Max power consumption

Operating voltage

Operating temperature

Operating humidity

Storage temperature

Storage humidity

40 × 40 × 136 mm (1.57 × 1.57 × 5.35 in)

From the power supply side to the port side

29000 RPM

38 CFM

60W

12 V

0℃ to 45℃ (32°F to 113°F)

5% RH to 95% RH, noncondensing

40℃ to +70℃ ( 40°F to +158°F)

5% RH to 95% RH, noncondensing

LED

Status

Item Specification

Steady green

Steady red

Off

The fan tray is operating correctly

The fan tray is faulty

The fan tray is not installed securely or no power is present

Description

Press the red part of the handle with one hand to unlock the fan

tray, and then pull the fan tray slowly out of the slot.

1. Orient the fan tray with its connectors facing downwards.

2. Holding the fan tray with one hand and supporting the fan tray bottom with the other, gently

insert the fan tray into the slot along the guide rails until the fan tray is seated securely in the

slot and has a firm contact with the connectors on the backplane.

Installing the fan tray

Removing the fan tray

The information contained herein is subject to change without notice.

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A)

Status LED

Handle Airflow direction arrow

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) User Guide-AP100

BOM: 3101A14E Part number: 5200-8665

Documentation

To access documentation and support services, go to the Hewlett Packard Enterprise

Support Center website:www.hpe.com/support/hpesc

5200-8665

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) User guide

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) User guide

HPE 5960 400G Pwr2Prt BF Fan Tray (R9Y17A) User guide

Related papers

Other documents