Andersen Auxiliary Foot Lock Replacement Service Instructions

  • I have analyzed the user guide for replacing the Auxiliary Foot Lock for Andersen E-Series gliding patio doors. This document provides a step-by-step procedure for replacing the foot lock, lists necessary tools, and includes crucial safety measures. I'm here to assist you with any questions you might have about this process.
  • What parts are included?
    What tools are needed?
    What should I do with old auxiliary foot lock?
9069178 BA-0 0 Revised 01/19/18
Tools Needed
Safety Glasses
Drill/Driver
Auxiliary Foot Lock Replacement
for Andersen® E-Series Gliding Patio Doors
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Parts Included
(1) Auxiliary Foot Lock
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.andersenwindows.com.
Please leave this guide with building owner.
Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Andersen” and all other marks where denoted are trademarks of Andersen Corporation. © 2018 Andersen Corporation. All rights reserved.
Auxiliary Foot Lock
Drill/Driver
Screws
2
9069178
Procedure is complete.
1
Interior
2
Interior
Remove auxiliary foot lock screws with a drill/driver and save for
reuse. Note auxiliary foot lock location. Remove auxiliary foot lock
and dispose of properly.
Position new auxiliary foot lock in noted location and fasten using
saved screws.
Auxiliary Foot Lock
Drill/Driver
Screws
Auxiliary Foot Lock
/