SAFETY STATEMENTS & WARNINGS
Any modication to the product or failure to follow recommended care will void the product warranty.
DRINK HOLDER SET
Read assembly and care instructions carefully before using this product. Save this manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the nish.
Page 1 / 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
• Do not install into loose soil as the unit may lean or tip over.
• Ensure the step-in stake is fully inserted into the ground before use.
• Do not force into soil that is too firm.
• Do not bend the metal.
• Always wear appropriate footwear when using the step-in to install the drink holder.
• Do not twist the holder after it is installed, as doing so may cause the step-in to break.
04/2022
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
General Use & Care
CLEANING: Wet a soft cloth with clean water and wipe away dirt and debris. Do not submerge in water.
CARE & STORAGE: Exposure to moisture and/or inclement weather can cause the connection point to rust. Store in
a dry, indoor location when not in use.
Troubleshooting
THE STEP-IN STAKE WON'T GO FAR ENOUGH INTO THE GROUND
• Check for obstacles beneath the soil, such as rocks, tree roots, or pavement.
• The soil may be too dry. Soak the soil with water and try inserting the step-in stake again.
DRINKS TILT TO THE SIDE
• Ensure the unit is installed straight and the drink-holding section is not bent.
• Ensure drinks are sitting as level as possible with the bottom of the drink-holding section.
• Place a coaster (not included) into the bottom of the drink-holding section.
Align the drink-holding section with the step-in stake section and twist until the components are rmly connected.
Assembly
TIP: Install into rm soil. Soft soil may not support the drink holder during use and hard soil can cause the
step-in to break and/or the metal to bend during installation.
With a rm grip on two separate points below the drink holder, and stepping on the step-in, push the drink
holder straight into the ground until the step-in is level with the ground. DO NOT push on the drink holder
portion of the unit, as doing so may damage the shape.
Installation
-
1
Sunnydaze Decor HMI-110 User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sunnydaze Decor HMI-733 Operating instructions
-
-
-
-
-
-
-
-
-
Other documents
-
Blue Wave NB2024 Operating instructions
-
Palisades PSEA2452HD2 Operating instructions
-
Little Tikes Jump 'n Slide Bouncer User manual
-
Toro 2226 Directional Drill User manual
-
-
-
-
-
Toro 4045 Directional Drill User manual
-
