Suzuki 990D0-08J70 Series Instructions For Mounting & Use
- Type
- Instructions For Mounting & Use
Suzuki 990D0-08J70 Series
The Suzuki 990D0-08J70 Series is a spoiler designed to be mounted on the original components of a Suzuki motorcycle. It is intended to enhance the appearance and aerodynamics of the motorcycle.
The spoiler is made of high-quality materials and is designed to withstand the rigors of everyday use. It is easy to install and remove, and it comes with all the necessary hardware.
The Suzuki 990D0-08J70 Series is a great way to add style and performance to your motorcycle. It is a must-have for any Suzuki enthusiast.
Here are some of the benefits of the Suzuki 990D0-08J70 Series:
Suzuki 990D0-08J70 Series
The Suzuki 990D0-08J70 Series is a spoiler designed to be mounted on the original components of a Suzuki motorcycle. It is intended to enhance the appearance and aerodynamics of the motorcycle.
The spoiler is made of high-quality materials and is designed to withstand the rigors of everyday use. It is easy to install and remove, and it comes with all the necessary hardware.
The Suzuki 990D0-08J70 Series is a great way to add style and performance to your motorcycle. It is a must-have for any Suzuki enthusiast.
Here are some of the benefits of the Suzuki 990D0-08J70 Series:
Spoiler
SUZUKI
990D0-08J70-xxx
SUZUKI GENUINE ACCESSORIES
GSR750L1
UK: INSTRUCTIONS FOR MOUNTING & USE
The holder of the vehicle should always be in possession of the
instruction manual.
D: MONTAGE - UND BEDIENUNGSANLEITUNGG
Der Fahrzeughalter sollte immer im Besitz der Montageanleitung
sein.
I: ISTRUZIONI PER L’USO E L’INSTALLAZIONE
Il proprietario del veicolo deve possedere sempre la guida delle
istruzioni per il montaggio.
F: MODE D’EMPLOI ET MONTAGE
L’exploitant du véhicule doit toujours êntre en possession des
instructions de montage.
E: MANUAL DE USO Y MONTAJE
El titular del vehiculo ha de tener siempre las instrucciones de
montaje.
2
TEXTOS
Questo accesorio a stato concepito per essere montato su motocicli in condizioni ori-
ginali. In caso di modifi che, potrebbe non essere più possibile applicare il rivestimento
in modo corretto.
I pezzi montati non devono essere mai messi in tensione per evitare fratture o rotture.
Posizionare i pezzi da montare e non stringere le viti fi no a quando questi siano ben
collocati.
Gli elementi di fi ssaggio potrebbero allentarsei durante l’operazione per effetto delle
vibrazioni. Verifi care che gli utensili di montaggio siano adeguatamente serrati confor-
memente a quanto indicato dal programma di manutenzione manuale.
ATTENZIONE
Dieses Zubehör wurde entwickelt, um es an ein Motorrad im Original- Zustand zu ver-
bauen. Jede Veränderung kann dazu führen, dass das Bauteil nicht richtig angebracht
werden kann.
Anbauteile müssen immer spannungsfrei montiert werden, da sonst Risse und Brüche
entstehen können. Alle Anbauteile lose vormontieren, und erst nach spannungsfreier
Ausrichtung die Befestigungs-Schrauben festziehen.
Anbauteile können sich durch Vibrationen lösen. Prüfen Sie in regelmäßigen Abständen
die Festigkeit der Schrauben in Übereinstimmung mit dem Werkstatthandbuch.
ACHTUNG
ATTENTION
This accessory has been designed to be mounted on the motorcycle with its original com-
ponents in place. Any alteration may affect the ability to properly mount this accessory.
Fairing parts must always be mounted without any tenseness in order to avoid cracks
and fl aws. Premount the parts loosely and tighten the fastening screws after justifi cation.
Mounting hardware may loosen from vibration during operation. Check the tightness of
the mounting hardware in accordance with the owner’s manual maintenance schedule.
3
Mounting time: 20 minutes
Montagezeit: 20 Minuten
Durata dell’installazione: 20 minuti
Durée d’installation: 20 minutes
Tiempo de montaje: 20 minutos
Ce accessoire a été conçu pour être monté sur une moto dans l’état d’origine. Toute
modifi cation apportée à la moto peut entraîner un mauvais positionnement du caré-
nage.
Les pièces montées jamais doivent être en tension pour éviter des fi ssures et déchi-
rures. Poser les pièces à monter et ne pas serrer les vis jusqu’avoir les pièces bien
en lieu.
Les éléments montés peuvent se desserrer sous l’effet des vibrations. Vérifi ez à
intervalles réguliers le bon serrage des vis en vous conformant aux instructions du
manuel d’atelier.
ATTENTION
ATENCION
Este accesorio ha sido diseñado para su instalación en una moto con los componentes
originales en su debido sitio. Cualquier modifi cación podría afectar negativamente la
posibilidad de montar con éxito este accesorio.
Las piezas montadas nunca deben quedar en tensión para evitar fi suras y roturas.
Presentar las piezas a montar y apretar los tornillos cuando la pieza esté bien colocada.
Debido a las vibraciones, los elementos montados pueden afl ojarse durante el uso.
Compruebe que estén debidamente apretados de acuerdo con el programa de man-
tenimiento del manual del usuario.
4
TEXTOS
NOTA
Die Richtzeiten für Service- und Wartungsarbeiten können durch die Montage von
SUZUKI Original Zubehör möglicherweise beeinfl usst werden. Eventuell ist die De-
montage / Montage des SUZUKI Original Zubehörs für Service- und Wartungsarbeiten
notwendig.
Der Fahrzeughalter sollte immer im Besitz der Montageanleitung sein.
HINWEIS
Due to mounted SUZUKI Genuine Accessories the service and maintanance fl at rate
might be affected. Dismounting / Mounting of SUZUKI Genuine Accessories is possibly
necessary for service and maintenance.
The mounting instructions should always be made available to the keeper of the
motorcycle.
NOTE
Il montaggio di un accessorio originale Suzuki potrebbe variare il tempo previsto per il
tagliando di manutenzione programmata. In alcuni casi sarà necessario smontare e ri-
montare l’accessorio per consentire le normali operazioni di manutenzione programmata.
Il propietario del veicolo deve possedere sempre la guida delle istruzioni per il montaggio.
5
REMARQUE
Le montage d’ Accessoires d’ Origine SUZUKI peut interférer sur les barèmes horai-
res des temps d’entretien ou de révision. Le montage ou démontage d’ Accessoires
d’ Origine SUZUKI peut être nécessaire pour la révision ou l’entretien du véhicule.
L’exploitant de véhicule doit toujours être en possession des instructions de montage.
NOTA
El montaje de accesorios originales Suzuki podría modifi car los periodos de las re-
visiones del vehículo. El desmontaje y montaje de los accesorios originales Suzuki
puede ser necesario en las operaciones de revisión y mantenimiento del vehículo.
El dueño del vehículo debe estar siempre en posesión de las instrucciones de montaje.
If you do not have the technical knowledge or experience to do any of the following steps,
you should contact your nearest SUZUKI dealer for assistance.
CAUTION
ATENCION
La condición para montar piezas es experiencia técnica. Si no está seguro de poder
realizar un paso de trabajo, debería consultar el distribuidor SUZUKI más cercano.
ACHTUNG
Die Vorraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung.
Wenn Sie sich nicht sicher sind, wie man eine bestimmte Arbeit ausführt, sollten Sie
diese Arbeit Ihrem SUZUKI-Händler überlassen.
ATTENTION
L’expérience technique est la condition nécessaire pour monter ces pièces. Si vous
n’êtes pas sûr de pouvoir le faire, vous devriez consulter le distributeur SUZUKI le plus
proche de votre domicile.
Per montare questi pezzi è necessaria esperienza tecnica. Se non si è sicuri di poterlo
fare da soli, è consigliabile rivolgersi al distributore SUZUKI di zona.
ATTENZIONE
6
7
4 mm
8 mm
10 mm
8
M6x35 (10 Nm)
M6x20 (6 Nm)
M6x12 (5 Nm)
M6x12 (10 Nm)
x1
x2
21
3
4
5
6
7 8
x1
x1
x4
9
11
12
x1
x1
x4
x1
x2
x4
10
x2
x2
x2
D:14x8.9
D:6
14
13
L
RL
D:19x12x2
D:20x24
R
x1
15
L
R
9
2
1
ORIGINAL
10 Nm
ORIGINAL
10 Nm
10 Nm
3
14
3
10 Nm
10 Nm
4
8
8
10
13
L
10
3
4
R
INSIDE
INSIDE
12
6
7
7
9
9
1
5 Nm
15
2
7
7
9
9
11
5
6
L
5
5
2
6 Nm
R
5
5
6 Nm
1
R
12
7
SUZUKI INTERNATIONAL EUROPE
BENSHEIM - GERMANY
07 / 2011
12
6
5 Nm
11
11
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Suzuki 990D0-08J70 Series Instructions For Mounting & Use
- Type
- Instructions For Mounting & Use
Suzuki 990D0-08J70 Series
The Suzuki 990D0-08J70 Series is a spoiler designed to be mounted on the original components of a Suzuki motorcycle. It is intended to enhance the appearance and aerodynamics of the motorcycle.
The spoiler is made of high-quality materials and is designed to withstand the rigors of everyday use. It is easy to install and remove, and it comes with all the necessary hardware.
The Suzuki 990D0-08J70 Series is a great way to add style and performance to your motorcycle. It is a must-have for any Suzuki enthusiast.
Here are some of the benefits of the Suzuki 990D0-08J70 Series:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Suzuki 990D0-08J70 Series
- français: Suzuki 990D0-08J70 Series
- español: Suzuki 990D0-08J70 Series
- Deutsch: Suzuki 990D0-08J70 Series
Related papers
-
Suzuki BANDIT 650 Mounting instructions
-
-
-
-
-
-
-
-
-
Other documents
-
Waeco MS900 (for Suzuki) Installation guide
-
Garmin Reactor 40 autopilot til pahngsmotorer Installation guide
-
Beta 1493J Operating instructions
-
Draw-Tite 75448 Installation guide
-
Reese 51152 Installation guide
-
-
Hoshizaki American, Inc. KM-320MAH-E User manual
-
-
Cequent Performance Products 24764 Installation guide
-
Tekonsha 118432 Installation guide
