GoVideo NOA Setup Manual

Brand: GoVideo

Model: NOA

Type: Setup Manual

Hi, I’m Noa.

Setup Guide

Table of Contents

Welcome

Acvang a New User

Working with Apple (iOS)

Working with Android

Renaming Your Cameras

Time Zone Change

Unscrew

Welcome to the GoVideo Family!

We would like to welcome you to the GoVideo Family.

By this me you have opened the box, now let’s get to know Noa.

In the box you should nd

the following items:

(If the camera is not slow ashing blue, press the reset buon for 3

seconds. See the diagram.)

Once unscrewed, ip camera up.

(You will need a pin to push reset buon)

Direcons for preparing your camera:

1. Remove all the pieces from their plasc bags.

2. Unscrew the camera from the base.

3. Open the baery bay inside the camera.

4. Insert the baeries. Polarity is shown on the lid.

5. Close baery lid and slide clip closed.

6. Screw base back onto the camera.

7. Wait 1 Minute. You should see a slow ashing

blue LED light.

1 camera 1 mounng

plate

1 bag of screws4 CR123A

baeries

Reset Buon

Acvang New User

Before you can begin:

Download and install the

GoVideo App to your phone/

tablet from the mobile app

store (GoVideo Cam on iOS

and GoVideo on Android).

You will also need your user-

name and password which

will be provided by your

GoVideo dealer.

Step 1

Step 2

Enter your email address and

the password provided by the

GoVideo dealer.

Select Login.

An acvaon code will be sent to

the email address you provided.

Open this email to view the 4

digit acvaon code. Enter this

code into the GoVideo app.

Select Connue.

Step 3

Step 5

Step 4

Choose a new password for the

GoVideo app. Enter the password

you selected twice.

Select Submit

At this point, you are logged into

the GoVideo app and can view a

list of cameras that are currently

linked to your account.

Choose a nickname for the

phone/tablet being used. This

selected nickname will be used

to idenfy and disnguish what

devices are currently logged in.

Select Connue

Examples: John’s Tablet, Jane’s Phone, etc.

Before you can begin:

GoVideo cameras can only be

connected to 2.4GHz WiFi

networks. Please ensure your

iPhone/iPad is connected to

the same 2.4GHz network

that you want to connect

your GoVideo camera to.

Step 1

Step 2

Find the UID in the list of camer-

as that matches the UID on the

back of your camera.

Select the gear icon next to the

UID to enter Setup.

Once in setup select WiFi Setup.

Working with Apple (iOS)

Step 3 Step 5Step 4

If your WiFi is turned o in the

sengs of your iPhone/iPad you will

see this screen. Please turn on your

WiFi in the iOS sengs and select

Next. If your WiFi is already turned on

in your iPhone/iPad you will not see

this screen and can skip this step.

Enter the WiFi password for the

WiFi network you want to connect

to and then select Next.

Note: You can select the eye icon in the

password box to reveal the password to

ensure it has been entered correctly.

If your iPhone/iPad is not

connected to the WiFi network

you want to connect the camera

to, please do so now. Once

connected to the desired WiFi

network select Next.

Step 6

Step 7

In order for the WiFi sengs to

be pushed to the camera, you will

now need to switch the WiFi net-

work to the GoVideoAP network.

To do this, go to the iOS Sengs

page and select WiFi.

Locate the GoVideoAP WiFi

network and select it to connect

to it. Once connected to the

GoVideoAp WiFi network navigate

back to the GoVideo App.

Note: The GoVideoAP WiFi network will not

require a password to connect.

Working with Apple (iOS)

Step 8 Step 9

Once you have navigated back to the

GoVideo App, select the Next buon

to connect the camera to the WiFi

network.

Note: If your rst try fails to connect the camera,

please wait 30 seconds and try again. Some

customer’s routers require 30 seconds before this

step can be completed.

The camera will now be added to

the WiFi network. Please wait 5

minutes for the camera to reboot

and then check the live video

stream.

Note: If the WiFi password is

incorrect the camera will not be

connected to the WiFi network and

you will not see live video stream. If

you do not see live video stream aer

ve minutes, please press and hold the

reset buon for 3 seconds and return

to Step 1 (see diagram on page 5).

Step 1

Step 2

Find the UID in the list of

cameras that matches the UID on

the back of your camera.

Select the gear icon next to the

UID to enter Setup.

Once you are in the Setup

category, select the WiFi Setup.

Working with Android

Before you can begin:

GoVideo cameras can only be

connected to 2.4GHz WiFi

networks. Please ensure your

phone/tablet is connected to

the same 2.4GHz network

that you want to connect

your GoVideo camera to.

Step 3 Step 5Step 4

If the WiFi is turned o in the sengs

of your Android device you will see

this screen. Please turn on your WiFi

in the device sengs and select Next.

If your WiFi is already turned on in

your Android device you will not see

this screen and can skip this step.

Enter the WiFi password for the

WiFi network you want to connect

to and then select Next.

Note: You can select the eye icon in the

password box to reveal the password to

ensure it has been entered correctly. .

Select the WiFi network you want

to connect the camera to and

then select Next.

Step 6

Select the GoVideoAP network for the camera you want

to connect. Once selected press the Next buon to

connect the camera to the WiFi network.

Note: If the rst try fails to connect the camera, please wait 30 seconds and

try again. Some customer’s routers require 30 seconds before this step can

be completed.

Working with Android

Step 7

The WiFi sengs will now be pushed to the camera so it

can be added to the WiFi network.

Note: If the WiFi password is

incorrect the camera will not be

connected to the WiFi network and

you will not see live video stream. If

you do not see live video stream aer

ve minutes, please press and hold the

reset buon for 3 seconds and return

to Step 1 (see diagram on page 5).

Step 1

Step 2

Find the UID in the list of camer-

as that matches the UID on the

back of your camera. Select the

gear icon next to the UID to enter

Setup.

Once in Setup select Camera Info.

Renaming Cameras

Prerequisites:

The customer has acvated

the account and connected

the camera to the internet.

Step 3 Step 5Step 4

In the Camera informaon page select

the edit icon in the top right corner of

the screen.

Once the camera name is saved,

the app will return to the Cameras

screen. On the Cameras screen,

you will see the new name of the

camera displayed.

Enter the desired camera name

and then select Save.

Step 1

Step 2

Find the UID in the list of

cameras that matches the UID on

the back of your camera.

Select the gear icon next to the

UID to enter Setup.

Once in Setup select Camera

Sengs.

Time Zone Change

Prerequisites:

Customer has acvated the

account and connected the

camera to the internet.

Step 3 Step 4

In the Camera Sengs page

select Time Zone.

Use the up and down arrows

to select the me zone that the

camera is in. When nished, press

the back arrow in the top le

corner unl you are back to the

camera list.

866-511-0000

www.GoVideo.com

GoVideo NOA Setup Manual

GoVideo NOA Setup Manual

Related papers

Other documents