7
Long-term exposure to loud music may cause hearing damage. It is best to
avoid extreme volume when using headphones, especially for extended
periods.
Pairing
To pair headphones that have never been paired with a Bluetooth device
before, please follow the steps below:
1. Ensure the headphones are switched o.
2. Press the
button for about 8 seconds, until the blue indicator light
ashes rapidly. The headphones are now in pairing mode.
3. Activate the Bluetooth feature on the mobile phone or music player, and
set it search for new Bluetooth devices.
4. Selected “LONBT12” from the list of found devices on the mobile phone
or music player. Some mobile phones list an option to “play through
headset”. Select to use the headphones.
5. If necessary, enter the passcode, “0000”, to pair and connect the
headphones.
6. The blue indicator light will ash slowly after you have successfully paired
the headphones.
Adjusting the Volumne
To adjust the headphones volume, press and hold the or buttons during
a call or while listening to music.
Making Call
To make a call, use your mobile phone in the normal way when the
headphones are connected to it.
Headphones controls while on a call:
To Press Button For
Answer call
Short time
End call
Short time
Reject call
3 secs
LONBT12_IB_final120627.indd 7 27/06/2012 2:18 PM