26” Full HD Digital
LCD TV with DVD Player
Instruction Manual
L26DVDB20
L26DVDB20_IB_final110210_running change4.indd 1 10/02/2011 3:43 PM
Contents
Preparation ............................................................................................................................................................................... 4
Unpacking the TV ...................................................................................................................................................................................................4
Installing / Removing the Base Stand .............................................................................................................................................................5
Front View and Controls .......................................................................................................................................................................................6
Rear View and Sockets ..........................................................................................................................................................................................7
Installing Batteries in the Remote Control ....................................................................................................................................................8
Remote Control Operation Range ....................................................................................................................................................................8
Remote Control .......................................................................................................................................................................................................9
Connections ............................................................................................................................................................................ 12
Making Video and Audio Connections ........................................................................................................................................................ 12
Connecting an AV Device with an HDMI Cable ........................................................................................................................................ 12
Connecting a Computer with a VGA Cable ................................................................................................................................................ 13
Connecting an AV Device with a Component (YPbPr) Cable .............................................................................................................. 13
Connecting an AV Device with a SCART Cable ......................................................................................................................................... 14
Connecting an AV Device with a Composite Cable ................................................................................................................................ 14
Connecting a SPDIF Audio Receiver ............................................................................................................................................................. 15
Connecting a USB Storage Device ................................................................................................................................................................. 15
Connecting the Aerial ........................................................................................................................................................................................ 16
Initial Setup ............................................................................................................................................................................ 17
Turning the TV on for the First Time ............................................................................................................................................................. 17
− Selecting the Input Source................................................................................................................................................................... 18
− Channel Selection ................................................................................................................................................................................... 18
− Display Channel Information .............................................................................................................................................................. 18
− Volume Adjustment ................................................................................................................................................................................ 18
Using the Features ................................................................................................................................................................. 19
Customising the Channel Setting (TV, DTV or Radio Mode) ................................................................................................................ 19
− Auto Install ................................................................................................................................................................................................. 19
− DTV Manual Install ..................................................................................................................................................................................20
− ATV Manual Install ................................................................................................................................................................................... 20
− Channel Edit .............................................................................................................................................................................................. 21
− CI (Common Interface) Information ..................................................................................................................................................22
Customising the Picture Setting .................................................................................................................................................................... 23
Customising the Sound Setting ..................................................................................................................................................................... 25
Customising the Time Settings....................................................................................................................................................................... 25
Customising the Option Setting .................................................................................................................................................................... 26
− Language .................................................................................................................................................................................................... 26
− Audio Language (DTV Mode) .............................................................................................................................................................. 27
− Subtitle Language (DTV Mode) .......................................................................................................................................................... 28
− Factory Reset ............................................................................................................................................................................................. 28
Customising the LOCK Setting ........................................................................................................................................................................29
− Lock System ............................................................................................................................................................................................... 29
− Change Password .................................................................................................................................................................................... 29
− Block Channel ........................................................................................................................................................................................... 30
− Parental Guidance ................................................................................................................................................................................... 30
Teletext (TV Mode) .............................................................................................................................................................................................. 31
− To Turn on Teletext Function............................................................................................................................................................... 31
Digital Teletext (DTV Mode) ............................................................................................................................................................................. 32
− Teletext within Digital Service ............................................................................................................................................................ 32
EPG (Electronic Programme Guide) .....................................................................................................................................33
EPG (Electronic Programme Guide) (DTV Mode) ..................................................................................................................................... 33
− Switch On/O EPG ................................................................................................................................................................................... 33
− View a Programme .................................................................................................................................................................................. 33
L26DVDB20_IB_final110210_running change4.indd 2 10/02/2011 3:43 PM
Using the DVD Features .........................................................................................................................................................34
Using the Built-in DVD Player ..........................................................................................................................................................................34
Compatible Disc Types ......................................................................................................................................................................................34
− Supported Formats ................................................................................................................................................................................. 34
− Region Code .............................................................................................................................................................................................. 34
Basic DVD Playback Functions ........................................................................................................................................................................ 35
− Playing the DVD .......................................................................................................................................................................................35
− Menu Playback (for DVD) ...................................................................................................................................................................... 35
− Stopping Playback ................................................................................................................................................................................... 35
− Previous / Next (for DVD / CD / Multimedia discs) ...................................................................................................................... 35
− Forward / Backward (for DVD / CD / Multimedia discs) ............................................................................................................. 35
− Pause (for DVD / CD / Multimedia discs) ......................................................................................................................................... 35
− Repeat (for DVD / CD / Multimedia discs) ....................................................................................................................................... 35
− Display (for DVD) ...................................................................................................................................................................................... 36
− Goto (for DVD / CD / Multimedia discs) ........................................................................................................................................... 36
− Audio (for DVD / CD) ............................................................................................................................................................................... 36
Program (for DVD) ............................................................................................................................................................................................... 36
Using the DVD Language Setup Page.......................................................................................................................................................... 37
− OSD Language .......................................................................................................................................................................................... 37
− Subtitle ........................................................................................................................................................................................................ 37
− Audio ............................................................................................................................................................................................................ 37
− DVD Menu .................................................................................................................................................................................................. 37
Using the DVD Video Setup Page .................................................................................................................................................................. 37
− Aspect Ratio ............................................................................................................................................................................................... 37
− TV System ................................................................................................................................................................................................... 37
Using the DVD Rating Setup Page ................................................................................................................................................................. 38
− Parental Control ....................................................................................................................................................................................... 38
− Set Password .............................................................................................................................................................................................38
Using the MISC Setup Page .............................................................................................................................................................................. 38
− MISC Setup ................................................................................................................................................................................................. 38
Playing Multimedia Discs .................................................................................................................................................................................. 39
− MP3/WMA/JPEG PLAYBACK ................................................................................................................................................................. 39
− PICTURE CD PLAYBACK .......................................................................................................................................................................... 39
− Image rotation .......................................................................................................................................................................................... 39
− CARD READER ........................................................................................................................................................................................... 39
− 3 in 1 Card Reader .................................................................................................................................................................................... 39
− USB ................................................................................................................................................................................................................ 39
Maintenance ...........................................................................................................................................................................40
Hints and Tips ......................................................................................................................................................................... 41
Display Modes ........................................................................................................................................................................43
YPbPr Mode ........................................................................................................................................................................................................... 43
VGA Mode ............................................................................................................................................................................................................... 43
HDMI Mode ........................................................................................................................................................................................................... 43
Specification ...........................................................................................................................................................................44
Safety Warnings .....................................................................................................................................................................45
L26DVDB20_IB_final110210_running change4.indd 3 10/02/2011 3:43 PM
GB-4
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Using the DVD Features Hints and Tips, Specification
and Safety Warnings
Congratulations on the purchase of your new Logik 26" Full HD Digital LCD TV with DVD
Player.
Your new TV has many features and incorporates the latest technology to enhance your viewing
experience. We recommend that you spend some time reading this instruction manual in order that you
fully understand these features. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Unpacking the TV
Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
Preparation
TV with TV Base
(TV Base’s P.N.: 101C2612134)
Remote Control / AAA Batteries x 2
(P.N.: 504C2612104 & 32200007158)
Instruction Manual
(P.N.: 4031C261214-V3)
Quick Start Guide
(P.N.: 4033C261206)
Digital TV Switchcover Addendum
(P.N.: 4031C261210)
SLEEP ASPECT
TEXTTV/RADI ODVD SETU P
EPG FAV INFO
DISPLAY
DVD AUDIO
ANGLEPBCDVD/USB /CARD TIT LE
SUBPAGE SIZE MIX
REVEAL
HOLD LIST
INDEX
RETURN
SUBTIT LE
FREEZE
PROGRAM REPEAT A-B
DVD MENU SOUND EXIT
PICTURE
STANDBY MUTE
TV AUDIO
RECALL/ GOTO
TV MENU SOURCE
+
CH
_
+
_
VOL
1 2 3
4 5 6
7 8 9 0
OK
L26DVDB20_IB_final110210_running change4.indd 4 10/02/2011 3:43 PM
GB-5
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Using the DVD FeaturesHints and Tips, Specification
and Safety Warnings
5. Mounting on the wall. This TV is designed to be wall-
mounted with a standard 200 mm x 100 mm mounting
kit designed for flat-panel TVs (sold separately).
Mount this TV according to the instructions included
in the mounting kit. Due to space restrictions, we
recommend that you make all connections (refer to
page 12-16 for details) before mounting on to the wall.
Installing / Removing the Base Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure
that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO
NOT exert pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side
facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam)
beneath the screen.
3. To install the base stand, slide in the base stand until
the screw holes are aligned. Secure the base stand
with the 4 screws.
Remove the base stand before mounting the TV
onto the wall.
4. To remove the base stand, untighten the 4 screws that
hold the base stand to the rear of the TV. Slide the
base stand out.
Keep all the screws. You will need them if you
want to use the base stand option.
Unscrew
Slide out
Screw
Slide in
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
Screws x 4
(P.N.: 209030427B1)
Screws x 4
(P.N.: 209030427B1)
200 mm
100 mm
Four mounting holes
(size M4x27 screw)
L26DVDB20_IB_final110210_running change4.indd 5 10/02/2011 3:43 PM
GB-6
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Using the DVD Features Hints and Tips, Specification
and Safety Warnings
Front View and Controls
Item Description
1 POWER LED
Illuminates green when the TV is turned on. Illuminates red when the TV is in standby
mode. The LED will illuminate green when the timer programming has started in the
standby mode.
2 IR (Infrared Receiver)
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
3 USB port
Allows the insertion of a USB storage device to play video, audio, photo and text files
by using the USB extension cable provided. (DVD Mode)
4 SD/MMC/MS port
Allows the insertion of a SD/MMC/MS card to play video, audio, photo and text files.
(DVD mode)
5 /
Press to skip to the beginning of the previous / next chapter or track. (DVD mode)
6
Press to stop playback. (DVD mode)
7
Press to start playback or pause. (DVD mode)
8
Press to eject disc. (DVD mode)
9 SOURCE
Press to select among different input signal sources:
DTV / TV / Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2.
10 MENU Displays the OSD (on screen display) menu.
11 CH +/- Press to select a channel or select a sub-menu from the OSD menu.
12 VOL +/-
Adjusts the volume.
Press to select and adjust a setting in the OSD menu.
13
Switches the TV on from standby.
Switches the TV back to standby.
9
10
12
13
11
USB
SD/MMC MS
3
4
6
7
8
5
1 2
L26DVDB20_IB_final110210_running change4.indd 6 10/02/2011 3:43 PM
GB-7
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Using the DVD FeaturesHints and Tips, Specification
and Safety Warnings
VGA INP UT
Y Pb Pr
L R SPDIF
AUDIO
VGA INPU T
SCART
HDMI 1
HDMI 2
ANT
100-240V~ 5 0/60 Hz
AC-INPUT
CO MMO N I NT E RF A CE
CA RD F AC E F RO NT
Rear View and Sockets
Item Description
1 AC~INPUT Connects the mains cable to the mains socket.
2 HDMI1 / 2
To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray
disc player or AV receiver.
3 VGA INPUT / AUDIO To connect to a computer or other devices with a VGA interface.
4 Y, PB, PR
To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component
(YPbPr) video and audio output sockets.
5 AUDIO (L/R) To connect to the AUDIO (L/R) output sockets on audio devices.
6 SPDIF To connect to the audio socket on a digital / standard 5.1 audio system.
7 COMMON INTERFACE Allows the insertion of a Common Access Module. (Refer to page 22 for details)
8 ANT 75 Ω 5V 50mA/Output To connect to the aerial socket on the wall with the RF coaxial cable.
9 SCART To connect to a VCR, DVD Player, or other AV device with a SCART output socket.
10 HEADPHONE To connect earphones for private listening.
11 VIDEO/AUDIO (L/R)
To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video
devices.
1 2
3
65
4
87 9
HEADPHONE
Video
AV
L
R
OFF ON
10
11
L26DVDB20_IB_final110210_running change4.indd 7 10/02/2011 3:43 PM
GB-8
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Using the DVD Features Hints and Tips, Specification
and Safety Warnings
Remote Control Operation Range
Point the remote control at the TV no more than 5 metres from the
remote control sensor on the TV and within 60° in front of the TV.
The operating distance may vary depending on the brightness of the
room.
Installing Batteries in the Remote Control
1. Press and lift the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends
of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
Handling the Batteries
• Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will
not function. Replace both batteries at the same
time with new ones.
• Do not install new batteries with used ones and
do not mix different types of batteries.
• Do not dispose of used batteries as domestic
waste. Dispose of them in accordance with local
regulations.
Handling the Remote Control
• Take care of your fingernails when you press and
hold the battery release tab.
• Do not drop or cause impact to the remote
control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time, as it
could cause corrosion or battery leakage and may
result in physical injury and/or property damage
including fire.
3. Close the battery compartment cover.
SLEEP AS PECT
TEXTTV/RADIODVD SETUP
EPG FAV INFO
DISPLAY
DVD AUDIO
ANGLEPBCDVD/USB/ CARD TITLE
SUBPAGE SIZE MIX
REVEAL
HOLD LIST
INDEX
RETURN
SUBTITL E
FREEZE
PROGRAM REPE AT A-B
DVD MENU SOUND EXIT
PICTURE
STANDBY M UTE
TV AUDIO
RECALL/G OTO
TV MENU SOURCE
+
CH
_
+
_
VOL
1 2 3
4 5 6
7 8 9 0
OK
30° 30°
5M
L26DVDB20_IB_final110210_running change4.indd 8 10/02/2011 3:43 PM
GB-9
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Using the DVD FeaturesHints and Tips, Specification
and Safety Warnings
SLEEP ASPECT
TEXTTV/RADIODVD SETUP
EPG FAV INFO
DISPLAY
DVD AUDIO
ANGLEPBCDVD/USB/CARD TITLE
SUBPAGE SIZE MIX
REVEAL
HOLD LIST
INDEX
RETURN
SUBTITLE
FREEZE
PROGRAM REPEAT A-B
DVD MENU SOUND EXIT
PICTURE
STANDBY MUTE
TV AUDIO
RECALL/G OTO
TV MENU SOURCE
+
CH
_
+
_
VOL
1 2 3
4 5 6
7 8 9 0
OK
1 STANDBY
Switches the TV between on and standby mode.
2 MUTE
Mutes and restores your TV sound.
3 0-9 Number Button
Press to select a programme.
4 TV AUDIO
Switches between different audio languages (only applicable
when the TV programme has this feature).
Press to eject a disc. (DVD mode)
5 RECALL/GOTO
Press to return to the previous viewing channel.
Press to skip to a specific location on a DVD / CD. (DVD mode)
6 TV MENU
Displays the OSD (On Screen Display) menu.
7 SOURCE
Press to select from different input signal sources:
DTV / TV / Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2.
8
Allows you to navigate the OSD menus and adjust the system
settings to your preference.
OK
Press to confirm the selection in the OSD menus.
9 DVD MENU
Press to display the DVD menu. (DVD mode)
10 EXIT
Press to exit the OSD (On Screen Display) menu.
11 SOUND
Press to select sound mode: Standard / Music / Movie / Sports /
User.
12 VOL + / –
Adjusts the volume.
13 CH + / –
Press to select a channel.
14 PICTURE
Press to select picture mode: Standard / Mild / User / Dynamic.
15 SLEEP
Sets the TV sleep timer: OFF/10/20/…/180/240 min.
16 ASPECT
Allows you to watch the screens in various formats: 4:3 / Auto /
16:9 / Smart Zoom / Zoom / Subtitle.
17 DVD SETUP
Press to display and exit the DVD setup menu. (DVD mode)
18 TV/RADIO
A short-cut to switch input source to TV / digital radio channels.
Display / remove the programme information.
19 TEXT
Turns on and off the Teletext function. (TV / DTV mode)
Remote Control
10
13
1
6
9
12
17
15
11
18
19
16
14
2
7
4
5
3
8
L26DVDB20_IB_final110210_running change4.indd 9 10/02/2011 3:43 PM
GB-10
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Using the DVD Features Hints and Tips, Specification
and Safety Warnings
SLEEP ASPECT
TEXTTV/RADIODVD SETUP
EPG FAV INFO
DISPLAY
DVD AUDIO
ANGLEPBCDVD/USB/CARD TITLE
SUBPAGE SIZE MIX
REVEAL
HOLD LIST
INDEX
RETURN
SUBTITLE
FREEZE
PROGRAM REPEAT A-B
DVD MENU SOUND EXIT
PICTURE
STANDBY MUTE
TV AUDIO
RECALL/G OTO
TV MENU SOURCE
+
CH
_
+
_
VOL
1 2 3
4 5 6
7 8 9 0
OK
20 EPG
Displays the EPG (Electronic Programme Guide). (DTV
mode)
Press to start playback or pause. (DVD mode)
21 FAV
Displays the Favourite Channel List. (TV / DTV mode)
Stop
Press to stop playback. (DVD mode)
22 INFO
Displays the present screen information such as the
current channel and the input source.
23 Coloured buttons (RED / GREEN / YELLOW / BLUE)
Press to access the TELETEXT items or programme edit
when using Digital / Freeview TV Channels. (TV / DTV
mode)
DVD/USB/CARD (red)
Switch input source. (DVD mode)
TITLE (green)
Displays the DVD title content. (DVD mode)
PBC (yellow)
Switches the PBC (Playback Control) On / Off (only
applicable when the VCD has this feature). (DVD mode)
ANGLE (blue)
Press to select different angles for the video. (DVD
mode)
24
Press to advance or reverse playback rapidly.
25
Press to skip to the beginning of the previous or next
chapter / track / photo. (DVD mode)
26 RETURN
Displays the DVD title menu or plays the first title. (DVD
mode)
DISPLAY
Displays the present screen information such as the
current title / chapter. (DVD mode)
DVD AUDIO
Changes the audio language or audio channel. (DVD
mode)
SUBTITLE
Displays subtitles which are broadcast with the
programme. (TV / DTV mode)
Displays subtitles on the DVD. (DVD mode)
21
20
22
24 25
23
26
L26DVDB20_IB_final110210_running change4.indd 10 10/02/2011 3:43 PM
GB-11
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Using the DVD FeaturesHints and Tips, Specification
and Safety Warnings
SLEEP ASPECT
TEXTTV/RADIODVD SETUP
EPG FAV INFO
DISPLAY
DVD AUDIO
ANGLEPBCDVD/USB/CARD TITLE
SUBPAGE SIZE MIX
REVEAL
HOLD LIST
INDEX
RETURN
SUBTITLE
FREEZE
PROGRAM REPEAT A-B
DVD MENU SOUND EXIT
PICTURE
STANDBY MUTE
TV AUDIO
RECALL/G OTO
TV MENU SOURCE
+
CH
_
+
_
VOL
1 2 3
4 5 6
7 8 9 0
OK
27 REVEAL
Reveals hidden information such as the answer to a quiz
in Teletext. (TV mode)
HOLD
Freezes a multi-page passage on screen in Teletext. (TV
mode)
LIST
• The user can set four favourite pages to be directly
linked to the four colour keys. While list mode is
activated, it is not possible to use TOP or FLOF
navigation with the colour keys. The favourite page
numbers should be stored and restored to/from
nonvolatile memory for each channel by the system
software. (TV /DTV mode)
• Displays the text page on the teletext screen. (TV
mode)
INDEX
Press to select the page number of the Index from
teletext. (TV mode)
28 SUBPAGE
Displays the subpage on the teletext screen. (TV mode)
PROGRAM
Press to program and view the selected starting point of
a chapter and title REPEAT on the DVD disc. (DVD mode)
29 SIZE
Press to enlarge the picture on the TV in teletext. (TV
mode)
REPEAT
Press to select between different repeat modes —
REPEAT CHAPTER / REPEAT TITLE / REPEAT OFF. (DVD
mode)
30 MIX
Press to select TELETEXT with a TV programme.
A–B
Repeat a segment between A and B. (DVD mode)
31 FREEZE
Press to freeze a picture on screen.
27
28
31
29 30
L26DVDB20_IB_final110210_running change4.indd 11 10/02/2011 3:43 PM
GB-12
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Connections
Making Video and Audio Connections
Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and
connection procedures.
When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are
complete.
Signal Type
Separate audio
connection required
HDMI
HDMI
(480i/480p/576i/576p/720p/1080i/1080p*)
No
VGA INPUT
VGA
Yes
Y Pb Pr
Component Video
(480i/480p/576i/576p/720p/1080i/1080p*)
Yes
SCART
SCART (RGB Input) No
Composite Video
Yes
Best Video
Performance
*1080p: Although this TV is compatible with a 1080p input, the screen is not capable of
displaying this resolution and consequently the image will be scaled to suit the screen.
Connecting an AV Device with an HDMI Cable
• This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection)
Protocol.
• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to
the HDMI function and the TV will automatically detect the resolution used by the HDMI source.
• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x
1080p.
1. Use a HDMI cable to connect the TV’s HDMI input
socket to the external AV device’s HDMI output socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch at
the side of the TV.
3. Press the button on the side panel of the TV or on
the remote control to turn on your TV.
4. Press the SOURCE button to display the Source List.
Use the buttons to select HDMI and then press
the OK button to confirm.
Although this TV is able to connect to a HDMI
device, it is possible that some devices may
not operate correctly.
Rear View of TV
Blu-ray Player / DVD Player /
Recorder
Set-top BoxGame Console
HDMI Cable
(not included)
VGA INPUT
Y Pb Pr
L R SPD IF
AUD IO
VGA INPUT
SCART
HDM I 1
HDM I 2
ANT
100 -240V ~ 50/6 0Hz
AC- INPUT
COM MON I NTERF ACE
CARD FACE FRON T
L26DVDB20_IB_final110210_running change4.indd 12 10/02/2011 3:43 PM
GB-13
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Connecting an AV Device with a Component (YPbPr) Cable
1. Use a component cable to connect the TV’s YPbPr
input sockets to an external AV device’s component
output sockets.
2. Use an AV cable to connect the TV’s AUDIO(L/R) input
sockets to the external AV device’s component audio
output sockets. (Audio Left = white, and Audio Right
= red)
Component port on the TV Y Pb Pr
Video output ports on DVD
player
Y Pb Pr
Y Cb Cr
3. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch at
the side of the TV.
4. Press the button on the side panel of the TV or on
the remote control to turn on your TV.
5. Press the SOURCE button to display the Source List.
Use the buttons to select YPbPr and then press
the OK button to confirm.
Satellite Receiver
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
Rear View of TV
L
R
COMPONENT
OUT
Y
Pr
Pb
AV Cable
(included)
Yellow (Video)
Red (R)
White (L)
Yellow (Video)
Red (R)
White (L)
Connecting a Computer with a VGA Cable
1. Use a VGA cable to connect the TV’s VGA input
socket to a computer’s VGA output socket. Use an
audio cable to connect the TV’s PC AUDIO input
socket to the computer’s audio output socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
at the side of the TV.
3. Press the button on the side panel of the TV or
on the remote control to turn on your TV.
4. Press the SOURCE button to display the Source
List. Use the buttons to select PC and then
press the OK button to confirm.
• The best resolution is 1920 x 1080.
• If your computer is set to shut down after a
few minutes of idle mode, the TV will also
switch to standby due to no signal being
received, this is to save energy. Press the
button on the side panel of the TV or on
the remote control to restart the TV.
Rear View of TV
VGA Cable
(not included)
Audio Cable
(not included)
Computer
Component Cable
(not included)
Pb/Cb
Pb/Cb
Pr/Cr
Pr/Cr
Y
Y
VGA INPUT
Y Pb Pr
L R SPD IF
AUD IO
VGA INPUT
SCART
HDM I 1
HDM I 2
ANT
100 -240V ~ 50/6 0Hz
AC- INPUT
COM MON I NTERF ACE
CARD FACE FRON T
VGA INPUT
Y Pb Pr
L R SPD IF
AUD IO
VGA INPUT
SCART
HDM I 1
HDM I 2
ANT
100 -240V ~ 50/6 0Hz
AC- INPUT
COM MON I NTERF ACE
CARD FACE FRON T
L26DVDB20_IB_final110210_running change4.indd 13 10/02/2011 3:43 PM
GB-14
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Connecting an AV Device with a Composite Cable
1. Use an AV cable to connect the TV’s AUDIO(L/R)/
VIDEO input sockets to an external AV device’s
composite audio/video sockets. (Video = yellow,
Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
at the side of the TV.
3. Press the button on the side panel of the TV or
on the remote control to turn on your TV.
4. Press the SOURCE button to display the Source
List. Use the buttons to select AV and then
press the OK button or to confirm.
Connecting an AV Device with a SCART Cable
1. Use a SCART cable to connect the TV’s SCART input
socket to an external AV device’s SCART output
socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch at
the side of the TV.
3. Press the button on the side panel of the TV or on
the remote control to turn on your TV.
4. The TV will change the input source to SCART
automatically once the AV device is switched on.
Rear View of TV
SCART Cable
(not included)
Satellite Receiver
VCR
DVD Player / Recorder
Set-top Box
Side View of TV
VGA INPUT
Y Pb Pr
L R SPD IF
AUD IO
VGA INPUT
SCART
HDM I 1
HDM I 2
ANT
100 -240V ~ 50/6 0Hz
AC- INPUT
COM MON I NTERF ACE
CARD FACE FRON T
Satellite Receiver
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Game Console
Yellow (VIDEO)
Red (R)
White (L)
Yellow (VIDEO)
White (L)
Red (R)
HEADPHONE
Video
AV
L
R
AV Cable
(included)
L26DVDB20_IB_final110210_running change4.indd 14 10/02/2011 3:43 PM
GB-15
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Using the DVD FeaturesHints and Tips, Specification
and Safety Warnings
Connecting a USB Storage Device
1. Switch off the TV before connecting any USB storage device.
2. Connect your USB storage device to the USB port of your TV.
3. Plug the connected devices into the mains socket before switching on the
POWER ON/OFF switch at the side of the TV.
4. Press the button on the side panel of the TV or on the remote control to turn
on your TV and your audio receiver and then set it to DVD mode.
5. Press the RED button on the remote control and then press the buttons to
select USB or SD/MMC/MS, press the OK button to confirm.
USB
SD/MMC MS
Connecting a SPDIF Audio Receiver
For better sound quality, you may want to play the
DVD audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV’s SPDIF
output socket to an external audio receiver’s
audio SPDIF input socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
at the bottom of the TV.
3. Press the button on the side panel of the TV or
on the remote control to turn on your TV and your
audio receiver and then select SPDIF to "ON" in
the SOUND menu of your TV.
The TV's volume control will have no effect.
You may control the audio level via the Audio
Receiver.
Rear View of TV
Side View of TV
USB Cable
AdapterPortable
hard Disk
USB
OR
• If a hard disk is used, make sure its mains adapter is connected to the mains supply.
• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current
consumption may exceed 500mA.
• If a USB hub is used, you may refer to the Recording Device on page 38 for details on selecting the
active device when several USB storage devices are connected.
• The maximum supported storage space of the hard disk is 160 GB.
• The file system only supports FAT32 format.
• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device
must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and
a warning statement will be shown on the screen. If this happens, please upgrade your USB storage
device.
• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard
disk. This is normal and the starting time may vary depending on the brand and the memory size of the
connected hard disk.
• Disconnect the USB storage device if it is not in use.
Audio Cable
(not included)
VGA INPUT
Y Pb Pr
L R SPD IF
AUD IO
VGA INPUT
SCART
HDM I 1
HDM I 2
ANT
100 -240V ~ 50/6 0Hz
AC- INPUT
COM MON I NTERF ACE
CARD FACE FRON T
L26DVDB20_IB_final110210_running change4.indd 15 10/02/2011 3:43 PM
GB-16
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
VGA INPUT
Y Pb Pr
L R COAX IAL
AUD IO
VGA I NPUT
SCA RT
HDM I 1
HDM I 2
ANT
100- 240V ~ 50/6 0Hz
AC-I NPUT
COMM ON IN TERFA CE
CARD FACE FRONT
OR
Connecting the Aerial
Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to
the RF (75Ω) socket at the bottom of your TV.
Do not connect the TV to the mains supply
until you have completed all the connections.
RF coaxial cable
(not included)
L26DVDB20_IB_final110210_running change4.indd 16 10/02/2011 3:43 PM
GB-17
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. Switch on the POWER ON/OFF switch at the back of the TV. At
this stage, the TV switches to standby mode. The power LED on
the front panel of the TV will illuminate.
3. In standby mode, press the button on the side
panel of the TV or on the remote control to turn
the TV on.
7. A pop-up screen will be displayed, press the OK button on the
remote control to start the Auto Tuning.
Select Cancel on the screen or press the EXIT button to cancel
the new installation. An installation reminder will appear the next
time you turn on the TV.
Always disconnect the TV from the mains socket when not in use for a long period of time.
The button on the side panel of the TV or on the remote control is only used for switching the TV into standby,
it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove
the mains plug from the mains socket.
6. Press the button and then press the OK button or the
button to select Auto Tuning.
Initial Setup
Language
Auto Tuning
English
INSTALLATION GUIDE
Language
Auto Tuning
English
INSTALLATION GUIDE
To the mains socket
OFF ON
STANDBY
Language
Auto Tuning
English
INSTALLATION GUIDE
Please ensure aerial is plugged in!!
Then press OK button.
4. The first time you turn the TV on, it will go straight into the
INSTALLATION GUIDE menu. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
“Selecting the Input Source” on the next page.)
5. The default on-screen menu language is set as English.
L26DVDB20_IB_final110210_running change4.indd 17 10/02/2011 3:43 PM
GB-18
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Selecting the Input Source
1. Press the SOURCE button to display the input source list.
2. Press the buttons to select the input source that you want: DTV / TV /
Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2.
3. Press the OK button to confirm your selection.
Alternative
• Press the TV/RADIO button to switch to digital radio channels
directly. Press it again to return to the previous DTV channel.
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9
buttons to select the channel.
• Press the FAV button to view the Favourite List. Then use the buttons
to highlight and select the favourite channel if you have previously preset
your favourite channels. Press the OK button to confirm the setting.
• Press the RECALL/GOTO button to return to the previously viewed channel.
• If a blocked channel is selected, the password screen will be displayed. Press
the 0-9 buttons to enter the password, the channel will then be unlocked
(refer to page 30 for details on Block Channel).
Display Channel Information
• Press the INFO button to view the current information.
Volume Adjustment
• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the MUTE button, press the MUTE button again or the VOL + button to resume
audio listening.
DTV
TV
Scart
AV
DVD
YPbPr
PC
HDMI1
HDMI2
Input Source
L26DVDB20_IB_final110210_running change4.indd 18 10/02/2011 3:43 PM
GB-19
PreparationConnectionsInitial SetupUsing the FeaturesEPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Auto tuning
DTV Manual tuning
ATV Manual tuning
Channel edit
CI information
CHANNEL
4. If you want to skip the DTV tuning, press the TV MENU button to interrupt
the tuning half way. A pop-up screen will be displayed, press the button to
select Yes and then press the OK button to confirm. You will then go straight
to ATV tuning. You may repeat the above step if you also want to skip the
ATV tuning.
5. After tuning is complete, press the EXIT button to exit. The channels are
arranged in a preset order. If you wish to skip channels, modify the preset
order or rename channels, select Channel Edit under the channel menu
(refer to page 21 for details).
3. A pop-up screen will be displayed, press the OK button to select Start on the screen to start the auto tuning. Auto tuning will
commence. This operation may take up to 15 minutes. The display will show the progress of the tuning and the number of
channels found.
Using the Features
Customising the Channel Setting (TV, DTV or Radio Mode)
Auto Install
Use this to automatically find and store all available channels. This is normally recommended if some channels have been added
or removed by the broadcaster or if you have moved house.
Please ensure aerial is plugged in!!
Then press OK button.
Saving
TV : 10 Channel(s)
DTV : 10 Channel(s)
Radio : 20 Channel(s)
TV : 0 Channel(s)
DTV : 0 Channel(s)
Radio : 0 Channel(s)
TV
Channel Tuning
Press<Menu> to skip.
Press<Exit> to skip.
1. Press the TV MENU button and then press the buttons to select the
CHANNEL menu.
2. Press the button to select Auto tuning and then press the OK button or
the button to confirm.
L26DVDB20_IB_final110210_running change4.indd 19 10/02/2011 3:43 PM
GB-20
Preparation Connections Initial Setup Using the Features EPG (Electronic
Programme Guide)
Hints and Tips, Specification
and Safety Warnings
Using the DVD Features
Auto tuning
DTV Manual tuning
ATV Manual tuning
Channel edit
CI information
CHANNEL
Auto tuning
DTV Manual tuning
ATV Manual tuning
Channel edit
CI information
CHANNEL
DTV Manual Install
Allows you to make manual fine tuning adjustments of the channel under DTV mode.
1. Press the TV MENU button and then press the buttons to select the
CHANNEL menu.
2. Press the button to select DTV Manual tuning and then press the OK
button or the button to confirm.
3. The DTV Manual Install screen will pop up. Press the buttons to select
the desired UHF channel and then press the OK button to commence the
search of that channel. When the signal has been tuned, the picture and
signal strength will be displayed on the screen.
4. Press the TV MENU button to return back to the previous menu.
5. Press the EXIT button to exit the menu.
ATV Manual Install
Allows you to make manual fine tuning adjustments if the channel reception is poor under TV mode.
1. Press the TV MENU button and then press the buttons to select the
CHANNEL menu.
2. Press the button to select ATV Manual tuning and then press the OK
button or the button to confirm.
Please select channel then
press OK to search
Bad GoodNormal
UHF CH 23
DTV Manual Tuning
MENU
L26DVDB20_IB_final110210_running change4.indd 20 10/02/2011 3:43 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
