Sandstrom SMPPCW12 User manual

Brand: Sandstrom

Model: SMPPCW12

Type: User manual

UNPACKING

PRODUCT OVERVIEW

SMPPCW12

Congratulations on the purchase of your new

Sandstr

Øm Universal USB Travel Adapter.

Please follow this quick start guide for a successful

first time set up.

We recommend that you spend some time reading the

instruction manual in order to fully understand all the

operational features it offers.

Read all the safety instructions carefully before use

and keep the instruction manual for future reference.

Quick Start Guide

Universal USB Travel Adapter

PRESS

Quick Start GuideMains USB Charger

Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so

according to local regulations. The following items are included:

If items are missing or damaged, please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

USB Socket

Mains USB charger.

Release Button

Travel Adapters

British-type USA-type

Aus-type

Euro-type

SMPPCW12_IB(80x45mm)_120910_Annie.pdf 1 10/09/2012 5:27 PM

OPERATION SPECIFICATION

SAFETY

QSG-SMPPCW12-120910V1

Visit Partmaster.co.uk today for the easiest way to

buy electrical spares and accessories. With over

1 million spares and accessories available we can

deliver direct to your door the very next day. Visit www.partmaster.co.uk or

call 0844 800 3456 (UK customers only) Calls charged at National Rate.

This symbol on the product or in the instructions means that

your electrical and electronic equipment should be disposed at

the end of its life separately from your household waste. There

are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your

retailer where you purchased the product.

DSG Retail Ltd • Maylands Avenue • Hemel Hempstead

Herts • HP2 7TG • England

• For indoor use only.

• Always insert the USB device in the correct direction. Failure to do so may result in

damage to the USB device and this unit.

• Only use with products designed to be powered or charged via a USB socket.

• Electrical interference and electrostatic discharges may cause the USB device to

malfunction and suffer damage, resulting in data loss.

• Keep the charger from any liquid.

• Do not disassemble charger.

• Do not use the charger when it is damaged.

• The adapter is used as a disconnect device.

• The mains socket must be located near the unit and should be easily accessible.

1. Choose an appropriate travel adapter (British-type,

European-type, Americantype or Australian-type) and

slide it onto the charger.

2. Connect one end of the USB cable to the USB socket of

the charger.

3. Connect the other end of the USB cable to your USB

device.

4. Plug the charger into a AC100-240V mains socket.

5. Unplug the charger from the mains socket when not in

use.

6. To detach the travel adapter from the charger, press the

Release button and slide the travel adapter out.

Input Voltage: AC100-240V ~ 50/60Hz

Output Voltage / Current: DC 5V 2.1A

PRESS

SMPPCW12_IB(80x45mm)_120910_Annie.pdf 2 10/09/2012 5:27 PM

Sandstrom SMPPCW12 User manual

Sandstrom SMPPCW12 User manual

Sandstrom SMPPCW12 User manual

Related papers

Other documents