Aventura FBR-1VM-RX-MINI User manual
- Category
- Network media converters
- Type
- User manual
This manual is also suitable for
Aventura FBR-1VM-RX-MINI is a receiver for the transmission of one baseband NTSC or PAL video signal over a single multimode fiber. It converts an optical fiber input into one video output, making it suitable for use in security, surveillance, and industrial applications. The unit is compact and rugged, with internal dc voltage regulation and detachable terminal blocks for easy installation. It also features LED indicators for power, optical link, and video input status, making it easy to monitor the unit's operation.
Aventura FBR-1VM-RX-MINI is a receiver for the transmission of one baseband NTSC or PAL video signal over a single multimode fiber. It converts an optical fiber input into one video output, making it suitable for use in security, surveillance, and industrial applications. The unit is compact and rugged, with internal dc voltage regulation and detachable terminal blocks for easy installation. It also features LED indicators for power, optical link, and video input status, making it easy to monitor the unit's operation.
AventuraTechnologies
180AdamsAvenue
Hauppauge,NY11788
(877)707‐9600
www.aventuratechnologies.com
Instruction Manual
Small Size, One Channel Video Transmitter and Receiver
Model Numbers:
FBR-1VM-TX-MINI – Transmitter, Multimode Fiber
FBR-1VM-RX-MINI – Receiver, Multimode Fiber
© Copyright 2008, Aventura Technologies, Inc.
© Copyright 2008, Aventura Technologies, Inc.
2
INSTALLATION AND OPERATION INSTRUCTIONS
FUNCTIONAL DESCRIPTION
The FBR-1VM-TX-MINI and FBR-1VM-RX-MINI operate as a transmitter / receiver pair for the
transmission of one baseband NTSC or PAL video signal, over a single multimode fiber.
The FBR-1VM-TX-MINI converts one video input, to an optical fiber output.
The FBR-1VM-RX-MINI converts an optical fiber input into one video output.
These units are contained in compact and rugged steel housings with internal dc voltage regulation. The
detachable terminal blocks and LED indicators provide for easy installation and monitoring of video,
optical link, and dc power.
The units operate surface mounted, as modular, stand-alone units.
INSTALLATION
THE INSTALLATION OF THIS UNIT SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON(S) AND MUST CONFORM TO ALL LOCAL CODES.
The general connectivity of the units is detailed in Figure 1.
Mount the unit to a secure surface using #8 (3mm) hardware in four places. See Figure 2 for a full size
mounting template. Be sure to allow sufficient room for the required minimum bend radius of the fiber
cable used.
POWER SOURCE
The unit requires a +12VDC power source for proper operation. The DC input is diode protected against
reverse polarity connection.
In the USA and in Canada, for standalone surface mounted installation, an Aventura Technologies FBR-
PSUS12DC1A is supplied with this unit. Contact Aventura Technologies for ordering power supply
units for use in countries other than the USA and Canada.
POWER CONNECTION
Power is supplied to the unit via a two pin, detachable terminal block connector. Follow the labeling on
the unit for proper connections of the +12 volt dc and ground leads.
VIDEO INPUT/OUTPUT CONNECTION
The video input and output connections are made via BNC connectors on the front of the units. The
video input and output are 75 ohms. For proper operation, the video output must be terminated with 75
ohms. For optimum performance, the use of the shortest practical length of coax cables is recommended.
FIBER CONNECTION
The fiber optic connections are made via ST connectors, located on the rear of the units.
STATUS INDICATORS
The unit provides the following LED status indicators to aid in installation and troubleshooting:
© Copyright 2008, Aventura Technologies, Inc.
3
POWER INDICATOR
A bi-color LED indicator monitors the voltage at the module’s power input connector and the operating
internal voltage of the module. The power status associated with this LED is summarized below.
Power Indicator Power Status
Green Proper Input Voltage Present – Proper Internal Operating Voltage Present
Red Proper Input Voltage Present – Internal Operating Voltage Faulty
Off No Input Voltage Detected
OPTICAL LINK INDICATOR
A bi-color LED indicator monitors the power of, and proper synchronization with the optical input
signal that is being received at the FBR-1VM-RX-MINI. The Optical Link status associated with this
LED is summarized below.
Optical Link Indicator Optical Status
Green Proper Optical Input Present
Red Optical Input Not Detected
Off Check Power Supply
VIDEO INPUT INDICATORS
A bi-color LED indicator for the video input channel of the FBR-1VM-TX-MINI monitors the status of
the video input. The video input status associated with this LED is summarized below.
Video Input Indicator Video Input Status
Green Proper Video Input Present
Red Video Input Not Correct (Wrong Level or Polarity)
Off No Video Input Detected
Figure 1 – General Connectivity of Units
© Copyright 2008, Aventura Technologies, Inc.
4
Figure 2 – Surface Mounting Template (1:1)
© Copyright 2008, Aventura Technologies, Inc.
5
LIMITED LIFETIME WARRANTY INFORMATION
This limited lifetime warranty applies only to the original end user customer of the product for so long
as the original end user customer owns the product. This limited warranty is non-transferable.
Damage due to shipping the products to you is covered under this limited warranty. Otherwise, this
limited warranty does not cover damage due to external causes, including accident, abuse, misuse,
problems with electrical power, servicing not authorized by Aventura Technologies, Inc., usage not in
accordance with product instructions, failure to perform required preventive maintenance, and problems
caused by use of parts and components not supplied by Aventura Technologies, Inc.
During the warranty period beginning on the invoice date, Aventura Technologies, Inc. will repair or
replace products covered under this limited warranty that are returned to Aventura Technologies, Inc.'s
facility. To request limited warranty service, you must contact Aventura Technologies, Inc.'s Customer
Technical Support within the limited warranty period. Refer below to find the appropriate contact
information for obtaining customer assistance. If limited warranty service is required, Aventura
Technologies, Inc. will issue a Return Material Authorization Number. You must ship the products back
to Aventura Technologies, Inc. in their original or equivalent packaging, prepay shipping charges, and
insure the shipment or accept the risk of loss or damage during shipment. Aventura Technologies, Inc.
will ship the repaired or replacement products to you freight prepaid if you use an address in the
continental United States, where applicable. Shipments to other locations will be made freight collect.
To view the full terms of the warranty, please go to: www.ati247.com
SERVICE INFORMATION
There are no user serviceable parts inside the unit.
In the event that service is required to this unit, please direct all inquiries to:
Aventura Technologies, Inc.
180 Adams Avenue Phone: (631) 300-4000
Hauppauge, NY 11788 FAX (631) 434-7000
E-mail:
© Copyright 2008, Aventura Technologies, Inc.
6
-
1
-
2
-
3
-
4
-
5
-
6
Aventura FBR-1VM-RX-MINI User manual
- Category
- Network media converters
- Type
- User manual
- This manual is also suitable for
Aventura FBR-1VM-RX-MINI is a receiver for the transmission of one baseband NTSC or PAL video signal over a single multimode fiber. It converts an optical fiber input into one video output, making it suitable for use in security, surveillance, and industrial applications. The unit is compact and rugged, with internal dc voltage regulation and detachable terminal blocks for easy installation. It also features LED indicators for power, optical link, and video input status, making it easy to monitor the unit's operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aventura FBR-1VS-TX User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Radio Shack SYSTEM 933 SYSTEM 933 User manual
-
Dish Basic User guide
-
Konami Caslevania Lords Of Shadow User manual
-
-
Danfoss Maneurop MT MTZ series - GB - SI User guide
-
Danfoss Maneurop MT MTZ series - US User guide
-
-
CompeGPS TEAM 002-6000550 Datasheet
-
-