Logik LCRDAB10 User manual

Brand: Logik

Model: LCRDAB10

Category: Alarm clocks

Type: User manual

Logik LCRDAB10 is a DAB clock radio that offers a wide range of features to enhance your listening experience. With its DAB/FM tuner, you can enjoy a variety of digital and analog radio stations. The unit also features an auto scan function that automatically searches for available stations, making it easy to find your favorites. Additionally, the LCRDAB10 has an alarm clock with dual alarms, snooze function, and sleep timer, providing you with convenient and flexible wake-up options.

DAB Clock Radio

Instruction Manual

LCRDAB10

LCRDAB10_IB_final111001_Zell.indd 1 01/11/2011 12:22 PM

LCRDAB10_IB_final111001_Zell.indd 2 01/11/2011 12:22 PM

Contents

Unpacking .....................................................................................................................5

Product Overview .........................................................................................................6

Front View .............................................................................................................................................6

Rear View ...............................................................................................................................................6

Top View ................................................................................................................................................7

Power Source ................................................................................................................7

Mains Power .........................................................................................................................................7

Basic Operation ............................................................................................................8

Powering ON/OFF ..............................................................................................................................8

Selecting Modes ................................................................................................................................. 8

Memory..................................................................................................................................................8

Adjusting the Volume .......................................................................................................................8

Setting the Time .................................................................................................................................9

Setting the Alarms .............................................................................................................................9

Checking the Alarm .........................................................................................................................10

Snooze Function ...............................................................................................................................10

Setting the Sleep Time ...................................................................................................................10

System Reset ......................................................................................................................................10

Using Earphones...............................................................................................................................11

DAB Operation ............................................................................................................12

Auto Scan Modes .............................................................................................................................12

Manual Tuning ...................................................................................................................................12

Secondary Services ..........................................................................................................................13

Storing Stations.................................................................................................................................13

Recalling a Stored Station .............................................................................................................13

DAB Display Modes .........................................................................................................................14

LCRDAB10_IB_final111001_Zell.indd 3 01/11/2011 12:22 PM

FM Operation ..............................................................................................................15

Switching from DAB to FM Mode ...............................................................................................15

Auto Scan ............................................................................................................................................15

Manual Scan .......................................................................................................................................15

Storing Stations.................................................................................................................................15

Recalling a Stored Station .............................................................................................................16

FM Display Modes ............................................................................................................................17

Maintenance ...............................................................................................................18

Hints and Tips .............................................................................................................18

Specication ...............................................................................................................19

Safety Warnings ..........................................................................................................20

LCRDAB10_IB_final111001_Zell.indd 4 01/11/2011 12:22 PM

Mains Adapter

(P.N.: SDF0500100G1BC)

The Main Unit

Instruction Manual

(P.N.: LCRDAB10-003)

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose of it

please do so according to local regulations.

The following items are included:

Thank you for purchasing your new Logik DAB Clock Radio.

We recommend that you spend some time reading this instruction manual in

order that you fully understand all the operational features it oers. You will

also nd some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction

manual for future reference.

If items are missing or damaged, please contact Partmaster (UK only).

Tel: 0844 800 3456 for assistance.

LCRDAB10_IB_final111001_Zell.indd 5 01/11/2011 12:22 PM

DC5V

ANT

1. Radio Aerial

2. Earphones Socket

Product Overview

Front View

1. LCD Display

Rear View

3. DC 5V IN

LCRDAB10_IB_final111001_Zell.indd 6 01/11/2011 12:22 PM

1. SELECT button

2. ALARM2 button

3. ALARM1 button

button

5. STANDBY button

6. SLEEP button

7. SNOOZE/MUTE button

Top View

ALARM1 ALARM2

STANDBY SLEEP

DAB/FM DISPLAY

PRESET

/SAVE

SCAN

VOL

SELECT

SNOOZE/MUTE

8. VOL+ button

9. DAB/FM button

10. DISPLAY button

11.

button

12. SCAN button

13. PRESET/SAVE button

14. VOL– button

Power Source

Mains Power

Before using, connect the supplied mains

adapter to the DC 5V IN socket and then to

the mains socket.

DC5V

ANT

LCRDAB10_IB_final111001_Zell.indd 7 01/11/2011 12:22 PM

• Press the STANDBY button to switch the unit back to Standby mode.

• Disconnect the mains adapter from the mains socket if you want to switch the

unit o completely.

Selecting Modes

Press the DAB/FM button repeatedly to switch between modes (DAB, FM).

Memory

When you power up the unit again, the unit plays the same mode and station (DAB

or FM) as the last operation.

Adjusting the Volume

Press the Vol+ or Vol– button to increase/decrease the volume.

Basic Operation

Powering ON/OFF

When you rst connect the mains adapter to the unit and the mains socket, the unit

will enter Standby mode.

• Press the STANDBY button to switch the unit on.

• Your radio will start in DAB mode and will automatically tune into all the available

DAB radio stations.

• Once complete the display will advise you of the number of DAB stations found.

If there are no DAB stations available in your area the display will read “Service

N/A”. All available stations will be saved for future use.

Aerial positioning

• You may need to reposition the aerial for optimum

reception. The best position is dependent on the station

and the strength of the signal.

• There is a signal bar icon

in the top right corner of the

radio display. Use this as a reference to nd the best signal.

LCRDAB10_IB_final111001_Zell.indd 8 01/11/2011 12:22 PM

Setting the Time

When you rst turn on your radio it will automatically set the time by searching out

the DAB signal. It will continue to search for the clock whilst in DAB mode until it

has managed to set the time. If after 10 minutes the clock has not automatically set

itself try repositioning the radio to get better reception. You cannot manually set

the time on this unit.

If the radio cannot nd a DAB frequency to set the clock. You can use the FM mode

(some FM stations also transmit time and date information).

1. Switch to FM mode by pressing the DAB/FM button.

2. Search for a station using either the

or button or the SCAN button.

3. Press the DISPLAY button repeatedly to scroll to the Time & Date display.

4. If the FM station is transmitting the time, the unit will set the time itself.

5. Please be aware that not all FM stations transmit the time. If the time does not

set after 3 minutes, then press the SCAN button to nd another station; repeat

until the time is set.

Setting the Alarms

1. Press and hold the ALARM 1 button once to set alarm 1.

2. The alarm displays Alarm 1 Time Set.

3. The minute digits will ash. Press the

or button to adjust the minute

digits, then press the SELECT button to conrm.

4. The hour digits (in 24hr time) will then ash. Press the

or button to

adjust the hour digits, then press the SELECT button to conrm.

5. Press the

or button (0-20) to set the alarm volume, then press the

SELECT button to conrm. Now press the or button to select either

BEEP TONE 1 or BEEP TONE 2 for your alarm sound. Press the SELECT button

to conrm.

6. Press the

or button (0-10) to select the DAB preset station you want to

set the clock to wake up to. Press the SELECT button to conrm.

7. If you want to set your alarm wake-up to your FM preset station you can select FM

preset (01-10) by pressing the

or button, then press the SELECT button.

8. Press the Alarm 1 button to select from in the four options, Alarm O, Alarm

Beep, Alarm DAB, Alarm FM. The selection you make will be automatically

conrmed after 3 seconds. You will see

on your display, conrming your

alarm has been set.

9. You can set ALARM 2 in the same way.

LCRDAB10_IB_final111001_Zell.indd 9 01/11/2011 12:22 PM

Checking the Alarm

1. To view the alarm time set, press the DISPLAY button until ALARM 1 or

ALARM 2 status is displayed.

2. You can see whether ALARM 1 or ALARM 2 is set as the

will illuminate

on the top left corner of the display.

Snooze Function

When the alarm sounds, the snooze indicator “ SNOOZE ” will appear in the display.

You can have two options.

1. Press the STANDBY button to turn o the alarm.

2. Press the SNOOZE/MUTE button when the alarm sounds. The snooze

indicator “ SNOOZE ” will illuminate in the display. The alarm will go o and

will then sound again in approximately 5 minutes.

3. Use the VOL+ and VOL– buttons to change the volume of the radio or buzzer.

Setting the Sleep Time

Press the SLEEP button to set the sleep time. You can select from 5 options, Sleep

O, Sleep 90 mins, Sleep 60 mins, Sleep 30 mins, Sleep 10 mins by pressing it

repeatedly. The selection you make will be automatically conrmed after 3 seconds.

System Reset

There may be times when you need to reset your unit back to the factory settings.

If you experience reception problems you may want to reset and try again. If you

move the unit to another part of the country and pick up the local and national

DAB stations in that area, your previously tuned channels may no longer be

available.

You can reset your radio by the following steps.

1. Press and hold down the DISPLAY button until the display changes.

2. Press the DISPLAY button again to scroll through the options until System

Reset appears on the screen.

3. Press the SELECT button to conrm the system reset.

After the system reset, all the tuned stations, DAB & FM preset

stations and alarm settings will be erased.

LCRDAB10_IB_final111001_Zell.indd 10 01/11/2011 12:22 PM

Using Earphones

You can listen to your radio using earphones

with a 3.5mm plug. Plug the earphones into

the socket on the side of your radio.

DC5V

ANT

• You can select the desired

volume using the VOL+ and

VOL– buttons.

• You can press the MUTE button

to turn o the sound and

press it again to return to the

previous volume level.

Long-term exposure to loud music

may cause hearing damage. It is

best to avoid extreme volume when

using earphones, especially for

extended periods.

LCRDAB10_IB_final111001_Zell.indd 11 01/11/2011 12:22 PM

DAB Operation

To listen to the tuned stations press the buttons. Each time you press the

buttons, you will skip to the previous or next stored station. The unit will display

the station name on the top line of the display. Press the SELECT button to conrm.

Auto Scan Modes

When you turn on your radio for the rst time it should have tuned in all the

available DAB stations. If you wish to retune a DAB station or search for new

stations press the SCAN button once to start a quick scan, or press and hold the

SCAN button to start a full scan.

1. Press the

or button to see what stations are present in the found DAB

station.

2. Press the SELECT button to listen to your chosen station.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help

you when aligning your aerial or when adding stations that were missed while auto

tuning.

1. Press and hold the DISPLAY button, the display will now show Manual tune,

then press the SELECT button.

2. Press the

or button to cycle through the DAB channels, which are

numbered from 5A to 13F.

3. After your desired channel number is selected, press the SELECT button to

enter the current multiplex, the top line will now display the rst station in the

multiplex.

4. Press the

or button to see what stations are present in the found

multiplex.

5. Once you have reached the last station in the found multiplex, it will revert

back to the rst station again. If you wish to exit the Manual Tuning mode,

just press the SELECT button.

LCRDAB10_IB_final111001_Zell.indd 12 01/11/2011 12:22 PM

Secondary Services

You may see a “ ” symbol after the name of the station. This indicates that there

are secondary services available to that station. These secondary services contain

extra services that are related to the primary station. e.g. a sports station may want

to add extra commentaries. The secondary services are inserted directly after the

primary station in the station list.

To select the secondary station, press the SELECT button when the “

” appears in

the display before the station name. When the secondary service ends, the radio

will automatically switch back to the primary station.

Storing Stations

You can store your favourite stations to the memory. This will enable you to access

your favourite stations quickly and easily.

6. Press the PRESET/SAVE button. The word PRESET followed by a number from

1-10 and the word FREE will appear on the display, if this position is empty.

7. Press the

or button to select your desired preset station number.

(Preset 1 to Preset 10)

8. Press and hold the PRESET/SAVE button, then the word PRESET and the

ashing station number will appear. Press the SELECT button to conrm and

save the station.

9. The station will be stored and the display will show “Preset # saved“.

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by

pressing the PRESET/SAVE button.

2. Press the

or button to select your desired preset station number.

3. Press the SELECT button to conrm the selection.

4. If you choose a preset station that has not been allocated a station, the unit

will be tuned to the previously playing station.

LCRDAB10_IB_final111001_Zell.indd 13 01/11/2011 12:22 PM

DAB Display Modes

Every time you press the DISPLAY button, the display will cycle through the

following display modes: Multiplex Name, Time/Date, Programme Type,

Audio Type / Bit Rate, DLS, Channel Frequency, Sleep Status, ALARM 1 Status,

ALARM 2 Status.

The information is displayed on the lower segment of the display.

Multiplex Name

A multiplex is a collection of radio stations

that are bundled and transmitted on one

frequency. There are national and local

multiplexes. Local ones contain stations

that are specic to that area.

Time/Date

The broadcaster (Radio station) provides

clock and date information automatically

you cannot manually set this information

on this unit.

Programme Type

This describes the “Style” or “genre” of

music that is being broadcast e.g. “Rock” or

“Classical”.

Audio Type / Bit Rate

The display will show the audio type and

digital audio bit rate being received.

DLS (Dynamic Label Segment)

Dynamic label segment is a scrolling

message that the broadcaster may include

with their transmissions. The message

usually includes information, such as

program details etc.

Channel Frequency

This shows the channel number and

frequency of the current station

e.g. 10A 209.936MHz.

Multiplex Name

Time/Date

Programme Type

Audio Type / Bit Rate

DLS

Sleep Status

Channel Frequency

ALARM 1 Status

ALARM 2 Status

LCRDAB10_IB_final111001_Zell.indd 14 01/11/2011 12:22 PM

FM Operation

Switching from DAB to FM Mode

In order to switch the radio from DAB to FM mode, press the DAB/FM button

once. On the top line of the display is the current frequency. On the bottom of the

display, RDS (radio data system) information will be displayed if it is available.

Auto Scan

To search for an FM station, you need to press and then release the SCAN button.

The unit will start scanning up the frequency band. To scan down the frequency

band, press and hold the SCAN button. Once a station has been found, the

scanning will stop automatically.

If no station is found, then the tuning will stop once it has cycled through the entire

FM band (87.5-108MHz).

Manual Scan

To search FM stations manually, simply press the or button repeatedly or

press and hold the or button until your desired frequency is reached.

Storing Stations

You can store your favourite stations to the memory. This will enable you to access

your favourite stations quickly and easily.

1. Press the PRESET/SAVE button. The word PRESET followed by a number from

1-10 and the word FREE will appear on the display, if this position is empty.

2. Press the

or button to select your desired preset station number.

(Preset 1 to Preset 10)

3. Press and hold the PRESET/SAVE button, then press the SELECT button to

save the station.

4. The station will be stored and the display will show “Preset # saved“.

LCRDAB10_IB_final111001_Zell.indd 15 01/11/2011 12:22 PM

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by

pressing the PRESET/SAVE button.

2. Press the

or button to select your desired preset station number.

3. Press the SELECT button to conrm the selection.

4. If you choose a preset station that has not been allocated a station, the unit

will be tuned to the previously playing station.

LCRDAB10_IB_final111001_Zell.indd 16 01/11/2011 12:22 PM

FM Display Modes

Every time you press the DISPLAY button, the display will cycle through the

following display modes: Audio Mode, Frequency, Radio Text, Time/Date,

Programme Type, Sleep Status, ALARM 1 Status, ALARM 2 Status.

Audio Mode

When in FM mode, the display will show if the

station being received is in mono or stereo.

The receiver will automatically switch between

Stereo and Mono mode. You can however

override this function, so that you can manually

switch between Stereo and Mono mode, which

is helpful if you’re listening to a poor FM signal.

Audio Mode

Program Service

Name (PS)

Radio Text

Time/Date

Programme Type

Sleep Status

ALARM 1 Status

ALARM 2 Status

Program Service Name(PS)

When a RDS station is received the name of

that station (Program Service Name (PS)) will be

displayed.

Radio Text

As with DAB, the broadcaster can include a

scrolling text that displays information about the

current program. If Radio text information is not

available, then the display will show <Radio Text

N/A>.

Time/Date

The broadcaster (Radio station) provides clock

and date information automatically so there’s

no need to manually set this information. In the

unlikely event that the broadcaster does not

transmit any clock information, an incorrect time

and date will be displayed.

Programme Type

This describes the “Style” or “genre” of music that

is being broadcast e.g. “Rock” or “Classical”.

To switch between mono and stereo, press the

SELECT button once, you will see on the display

“Mono” or “Auto”. To toggle between each

mode just press the SELECT button again.

LCRDAB10_IB_final111001_Zell.indd 17 01/11/2011 12:22 PM

Maintenance

Hints and Tips

Problem Cause / Solution

No power Check that the power is switched on at the wall socket.

Check if the mains adapter is properly plugged into the unit

and the mains socket.

No sound Check that the volume control is NOT at minimum setting.

Check that the unit is NOT set to mute.

Desired station not

found

Adjust the aerial location and position to obtain a better

signal reception.

Tune to the correct radio channel frequency.

Radio channel

reception is poor

Adjust the aerial location and position to obtain a better

signal reception.

Tune to the correct radio channel frequency.

Function disturbed If none of the above solutions work, try switching o and

unplugging your unit, leaving it for two minutes and then

reconnect to the mains socket and switch it on again.

Ensure to unplug the unit from the mains socket before cleaning.

• To clean the unit, wipe the case with a slightly moist, lint-free cloth.

• Do not use any cleaning uids containing alcohol, ammonia or abrasives.

• Do not spray an aerosol at or near the unit.

LCRDAB10_IB_final111001_Zell.indd 18 01/11/2011 12:22 PM

Specication

Adapter Input 100-240V ~ 50/60 Hz 0.18A MAX

Adapter Output 5V 1A

Frequency response FM87.5 – 108 MHz

DAB Band III 174.928 – 239.200 MHz

Speaker Output 2.5W RMS

Speakers 3 inches full range speaker x 1 piece

LCD LCD display with blue back light

Earphones 3.5mm stereo earphone socket

Power Consumption 5 W

Power Consumption (Standby) 0.8W

Features and specications are subject to change without prior notice.

LCRDAB10_IB_final111001_Zell.indd 19 01/11/2011 12:22 PM

Safety Warnings

• Read all the instructions carefully

before using the unit and keep

them for future reference.

• Retain the manual. If you pass the

unit onto a third party make sure to

include this manual.

• Check that the voltage marked on

the rating label matches your mains

voltage.

Damage

• Please inspect the unit for damage

after unpacking.

• Do not continue to operate the

unit if you are in any doubt about it

working normally, or if it is damaged

in any way - switch o, withdraw the

mains plug and consult your dealer.

Location of Unit

• The unit must be placed on a at

stable surface and should not be

subjected to vibrations.

• Do not place the unit on sloped or

unstable surfaces as the unit may

fall o or tip over.

• The mains socket must be located

near the unit and should be easily

accessible.

• This unit is designed for indoor use

only.

Temperature

• Avoid extreme degrees of

temperature, either hot or cold.

Place the unit well away from heat

sources such as radiators or gas/

electric res.

• Avoid exposure to direct sunlight

and other sources of heat.

Naked Flames

• Never place any type of candle or

naked ame on the top of or near

the unit.

Moisture

• To reduce the risk of re, electric

shock or product damage, do not

expose this unit to rain, moisture,

dripping or splashing. No objects

lled with liquids, such as vases,

should be placed on the unit.

• If you spill any liquid into the unit, it

can cause serious damage. Switch

it o at the mains immediately.

Withdraw the mains plug and

consult your dealer.

Ventilation

• To prevent the risk of electric shock

or re hazard due to overheating,

ensure that curtains and other

materials do not obstruct the

ventilation vents.

• Do not install or place this unit in

a bookcase, built-in cabinet or in

another conned space. Ensure the

unit is well ventilated.

Safety

• Always disconnect the unit from the

mains supply before connecting/

disconnecting other devices or

moving the unit.

• Unplug the unit from the mains

socket during a lightning storm.

LCRDAB10_IB_final111001_Zell.indd 20 01/11/2011 12:22 PM

Page is loading ...

Logik LCRDAB10 User manual

Brand: Logik

Model: LCRDAB10

Category: Alarm clocks

Type: User manual

Download PDF

report

Logik LCRDAB10 User manual

Logik LCRDAB10 User manual

Related papers

Other documents