Robus RHL5040-04 User manual

  • Hello! I've reviewed the instruction manual for the ROBUS HILUME LED Flood Lights. This document outlines the installation process and technical specifications for models RHL1040-04, RHL2040-04, RHL10040-04, RHL3040-04, and RHL5040-04. These lights feature an IP65 rating and operate at 4000K. I'm ready to answer your questions about these devices.
  • What is the IP rating of these lights?
    Are these lights dimmable?
    What color temperature do these lights have?
    Do I need a qualified electrician to setup these lights?
RHL1040-04 RHL2040-04 RHL10040-04
RHL3040-04 RHL5040-04
HILUME LED FLOOD LIGHT, IP65, BLACK, 4000K,
C/W 1M FLEX
1. Ensure mains supply is switched off before commencing work.
2. Select suitable location for luminaire.
3. Mark wall with appropriate fixing positions. Before drilling, ensure
that the hole does not impinge on pipe work, cables or other
building services.
4. Attach luminaire and fix bracket by tighten screwsthen adjust to
desired angle. Ensure that it is secure.
5. The luminaire is supplied with 1m of rubber cable. Using suitable IP
rated enclosure terminate Brown (Live), Blue (Neutral) and
Green/Yellow (Earth) to switch supply.
6. This product has no user serviceable parts. If any part is damaged,
disconnect from mains and discontinue use.
Note: No “fixings screws provided’, please use appropriate fixing screws.
LN
1 2
43
A 51mm
114mm
114mm
62mm
129mm
121mm
63mm
144mm
132mm
63mm
184mm
165mm
63mm
285mm
283mm
63mm
51mm 51mm 51mm 90mm
25.5mm 45mm
25.5mm 25.5mm 25.5mm
B
A
B
RHL1040 RHL2040 RHL3040 RHL5040 RHL10040 10W 20W 30W 50W 100W
RHL1040 RHL2040 RHL3040 RHL5040 RHL10040
W
H
D
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN
FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt
about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior
notification. For the latest technical information please visit our web site
www.robus.com.au
Issue 1 071119
Page 1
Installation
The Installation must be carried out by a qualified electrician
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65
Luminaire is non-dimmable
WD
H
LED Group Australasia
9/210 Queensport Road North Tel: 07 3890 5444
Murarrie Fax: 07 3890 4777
QLD 4172 Email: [email protected]
Australia Website: www.robus.com.au
LED Group
Crowe Hogwarth Tel: +64 0508 533 335
72 Trafalgar Square Email: [email protected]
NELSON 7010 Website: www.robusled.co.nz
New Zealand
/