Robus RVAC8306550 User manual

Type
User manual

This manual is also suitable for

1 2
50m Max.
16mm
7mm
AC 220-240V
3
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION
AND RETAIN FOR FUTURE REFERENCES. ! Electrical products can
cause death or injury, or damage to property. The Installation must be
carried out by a qualified electrician.
Note:
The luminaire must be disconnected before carrying out any insulation
resistance testing. Product technical information and specification may
change over time without prior notification. For the latest technical
information please visit our web site www.robus.com.au and
www.robusled.co.nz
Issue 1 290121
Installation
-20°C < Ta < +45°C, 220-240V~50/60Hz, Class II, IP65
Luminaire is non-dimmable
Suitable for mounting on a normally flammable surface.
VEGAS AC STRIP 8W/M 240V WARM WHITE
3000K/4000K IP67 50M
RVAC8306550 RVAC8406550
LED Group
Crowe Horwath Tel: +64 3668 5285
72 Trafalgar Street Email: [email protected]
NELSON 7010 Website: www.robusled.co.nz
New Zealand
LED Group Australia Pty Limited
Suite B, 2 Pittwin Road Tel: 07 3890 5444
Capalaba Fax: 07 3890 4777
Queensland 4157 Email: [email protected]
Australia Website: www.robus.com.au
1. Ensure mains supply is switched off before commencing work.
2. Cut lengths are only provided through Robus Customised
Conversions department.
3. Maximum continuous length 50m
Mounting:
4. Using screws attach mounting bracket (RVACB ) onto the surface
( 4 x brackets for the first meter, then 3 x brackets every meter).
Attach the LED strip onto the mounting kit and close clips. Avoid
covering the LED chip as far as possible.
5. Make connections in suitable IP enclosure. Connect supply
cables: L - Blown; N - Blue.
6. Please see installation diagrams and install the strip as per
diagrams.
ACCESSORIES:
RVACB: VEGAS AC Strip Mounting Bracket Accessory Kit
(pack of 2pcs)
  • Page 1 1

Robus RVAC8306550 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI