Warrior Products 2.5" Wide Leaf Spring Shims Installation guide

Hello! I've reviewed the Installation Instructions for the Warrior Products Leaf Spring Shim 800050 & 800060 Series. These shims are designed to bolt into the leaf pack through the cross pin, and the document provides details on pin sizing and necessary steps for installation. I'm ready to address any questions you might have about this product or the installation process.
How are these shims designed to attach to the leaf spring?

What do I do if my cross pin is not long enough?

What is the standard cross-pin size for these shims?

What should I do if have the larger cross pin size?

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

800050 & 800060 Series

Leaf Spring Shims

INSTALLATION INSTRUCTIONS

NOTE: Leaf spring shims should be installed by someone with a strong aptitude in leaf spring suspension. If you are unsure

on how to use and install these shims, it is best if you refer to a professional.

1. These shims are designed to bolt into the leaf pack through the cross pin in the springs.

2. If your cross pin is not long enough to fit through the shim, you will need to get a longer pin

3. Cross-pin size is 5/16”. If you have a larger pin size, you will need to drill out the shim.

For more information on Warrior Products Jeep Parts and Accessories, please visit us on the web at