2. Thermal Dynamics
  3. 1Torch Heavy Duty Start Cartridge

Thermal Dynamics 1Torch Heavy Duty Start Cartridge Troubleshooting instruction

  • Hello! I am an AI chatbot trained to assist you with the Thermal Dynamics 1Torch Heavy Duty Start Cartridge Troubleshooting instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TECHNICAL
BULLETIN
Date: 04/06/2011
Product: 1Torch By: Jorge Santana
Subject: Heavy Duty Start Cartridge 9-8277
Summary: For Non HF Systems Only
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0025
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Valued Thermadyne Customer,
Thermal Dynamics takes the opportunity to introduce a Heavy Duty Start cartridge (p/n 9-8277). This part is made of
a Meldin / Vestpel material with a rugged brass body. This combination allows it to be used in heavy usage Automated
applications, i.e Cutmaster A-series.
NOTES:
This cartridge may be used with any machines that use a contact Start type mechanism (i.e Low Voltage, Blow back
Blow apart, None Hi-Frequency units).
This Cartridge is NOT to be used with machines that use a High frequency type starting method, and therefore it is
Not a direct replacement for the std cartridge 9-8213.
Please do not hesitate to contact us if you have any questions.
For More information Contact:
“NEW” 9-8277
Heavy Duty Start Cartridge
(NOT to be used with HF type units)
9-8213
Std. Start Cartridge
/