ESAB CM 39 / CM 10 Troubleshooting instruction

ESAB
Brand
ESAB
Model
CM 39 / CM 10
Type
Troubleshooting instruction
TECHNICAL
BULLETIN
Date: 03/23/2009
Product: CM 39 / CM 10 By: Jorge Santana
Subject: CutMaster 39 and CutMaster 10
Summary: AC light flashing
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0007
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Valued Thermadyne Service Provider
It just come to our attention that some time ago the vendor that supply us with the fans for the CutMaster 39 and the
CutMaster 10 changed its specification slightly … the new fans stop drawing current for approximately 40ms
when the unit is first turned on. This situation may be interpreted by the main board as a problem with the fan and the
AC light will begin to flash.
In most cases the problem is resolved by simply turning the unit off and back on.
An alternative option is to remove D14 from the Main PCB ( just clip it off from the board) and apply RTV to the
exposed terminals. Removal of D14 will defeat the current measuring circuit for the fan and it will not affect the
functionality of the unit.
The following page shows the location of diode (D14) in the main PCBoard.
Note. All the Cut Masters 39 and CutMasters 10 manufactured after January 15, 2009 have D14 removed from the
Main board.
Please do not hesitate to contact us if you have any questions.
For More information Contact:
TECHNICAL
BULLETIN
Date: 03/23/2009
Product: CM 39 / CM 10 By: Jorge Santana
Subject: CutMaster 39 and CutMaster 10
Summary: AC light flashing
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0007
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
For More information Contact:
Remove D14
  • Page 1 1
  • Page 2 2

ESAB CM 39 / CM 10 Troubleshooting instruction

ESAB
Brand
ESAB
Model
CM 39 / CM 10
Type
Troubleshooting instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents