Noble House 301806 Operating instructions

Brand
Noble House
Model
301806
Type
Operating instructions

This manual is also suitable for

Noble House 301806

The Noble House 301806 is a versatile and durable piece of furniture that can be used to create a comfortable and stylish seating area in your home. With its sturdy construction and easy-to-assemble design, the Noble House 301806 is a great choice for anyone looking for a sofa that will last for years to come.

The Noble House 301806 is made from high-quality materials, including a solid wood frame and durable upholstery. The sofa is also easy to clean, making it a great choice for families with children or pets.

Noble House 301806

The Noble House 301806 is a versatile and durable piece of furniture that can be used to create a comfortable and stylish seating area in your home. With its sturdy construction and easy-to-assemble design, the Noble House 301806 is a great choice for anyone looking for a sofa that will last for years to come.

The Noble House 301806 is made from high-quality materials, including a solid wood frame and durable upholstery. The sofa is also easy to clean, making it a great choice for families with children or pets.

Label Picture Description QTY
A
Side Panel
1
B
Back Support Bar
1
C
Seat Panel
(Labeled with 'face' and
'bottom')
1
D
Leg Support Bar
1
E
Seat Cushion
2
F
Back Cushion
2
Caution : You must read this before you proceed
Right Sofa
Page -4105 OF 8
Label Picture Description QTY
①
Bolt (M6*20MM)
11
②
Allen Key
1
Before
Beginnin
g
Assembly
:
Page -4104 OF 8
Step 1
Overview
This Sofa has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Sofa parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Take out the plastic plug in the four ends of the Seat Board(C) using Allen key (②) as shown
above.
FRONT FACING
Leg Support Bar(D)
Side Panel(A)
Back Support Bar(B)
Seat Panel(C)
Seat Cushion(E)
Back Cushion(F)
Page -4103 OF 8
Step 2
Step 3
Place the Side Panel(A) with its inside facing up.
Insert Seat Panel(C) into the Side Panel(A).
3.1) Attach the Seat Panel(C) to Side Panel(A) using Bolts(①) with Allen Key(②) as shown
above.
3.2) Attach the Seat Panel(C) to Side Panel(A) using Bolts(①) with Allen Key(②) as shown
above.
Page -4102 OF 8
Step 4
Step 5
Insert the Back Support Bar(B) into the Side Panel(A).
Attach the Back Support Bar(B) to the Side Panel(A) using Bolt(①) with Allen Key(②).
Do not fully tighten Bolt.
A
Page -4101 OF 8
Step 6
Insert the Leg Support Bar(D) into the Back Support Bar(B) and Seat Panel(C) as shown above.
Page -4100 OF 8
Step 7
Step 8
7.1) Attach the Leg Support Bar(D) to Back Support Bar(B) and Seat Panel(C) using Bolts(①) with
Allen Key(②) as shown above.
7.2) Attach the Leg Support Bar(D) to Seat Panel(C) using Bolt(①) with Allen Key(②) as shown
above.
Do not fully tighten Bolts.
Page -4099 OF 8
Step 9
Put Seat Cushions(E) and Back Cushions(F) on the Sofa, and stick the vercro.
Your Left Sofa is ready for use.
Stand the Sofa up.
Place the Sofa on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit onto to the Sofa.
This will help to align all parts at all the joints.
Then get off the Sofa, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute the same process.
If the Sofa is not stable it could lead to damage to the product.
Note: This step is done best with the assistance of a second adult.
Page -4098 OF 8
Label Picture Description QTY
A
Side Panel
1
B
Back Support Bar
1
Caution : You must read this before you proceed
Sofa Corner
Page -4105 OF 9
C
Seat Panel
(Labeled with 'face' and
'bottom')
1
D
Leg Support Bar
1
E
Seat Cushion
1
F
Back Cushion
2
Label Picture Description QTY
①
Bolt (M6*20MM)
11
②
Allen Key
1
Before
Beginning
Assembly:
Page -4104 OF 9
Overview
This Sofa Corner has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Sofa parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Before
Beginning
Assembly:
FRONT FACING
Leg Support Bar（D）
Side Panel（A）
Back Support Bar（B)
Seat Panel（C）
Seat Cushion（E）
Back Cushion（F）
Page -4103 OF 9
Step 1
Step 2
Open the carton and place all the parts onto a clean, non-marring surface.
Remove the plastic plugs in the four ends of the Seat Board(C) using Allen Key(②) as shown
above.
Place the Side Panel(A) with its inside facing up.
Insert the Seat Panel(C) into the Side Panel(A).
Page -4102 OF 9
Step 3
Step 4
3.1) Attach the Seat Panel(C) to Side Panel(A) using Bolts(①) with Allen Key(②) as shown
above.
3.2) Attach the Seat Panel(C) to Side Panel(A) using Bolts(①) with Allen Key(②) as shown
above.
Insert the Back Support Bar(B) into the Side Panel(A).
Page -4101 OF 9
Step 5
Step 6
Attach the Back Support Bar(B) to the Side Panel(A) using Bolt(①) with Allen Key(②).
Do not fully tigthen Bolts.
Insert the Leg Support Bar(D) into the Back Support Bar(B) and Seat Panel(C) as shown above.
Page -4100 OF 9
Step 7
Step 8
7.1) Attach the Leg Support Bar(D) to Back Support Bar(B) and Seat Panel(C) using Bolts(①) with
Allen Key(②) as shown above.
7.2) Attach the Leg Support Bar(D) to Back Support Bar(B) using Bolts(①) with Allen Key(②) as
shown above.
Do not fully tigthen Bolts.
Page -4099 OF 9
Step 9
Put Seat Cushion(E) and Back Cushions(F) on the Sofa, and stick the vercro.
Your Sofa Corner is ready for use.
Stand the Sofa Corner up.
Place the Sofa Corner on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit onto the Sofa Corner.
This will help to align all the parts at all joints.
Then get off the Sofa Corner, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute the same process.
If the Sofa is not stable it could lead to damage to the product.
Note: This step is done best with the assistance of a second adult.
Page -4098 OF 9
Page -4097 OF 9
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Noble House 301806 Operating instructions

Brand
Noble House
Model
301806
Type
Operating instructions
This manual is also suitable for

Noble House 301806

The Noble House 301806 is a versatile and durable piece of furniture that can be used to create a comfortable and stylish seating area in your home. With its sturdy construction and easy-to-assemble design, the Noble House 301806 is a great choice for anyone looking for a sofa that will last for years to come.

The Noble House 301806 is made from high-quality materials, including a solid wood frame and durable upholstery. The sofa is also easy to clean, making it a great choice for families with children or pets.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents