Noble House 41905 Operating instructions

Type
Operating instructions

This manual is also suitable for

Noble House 41905

The Noble House 41905 is a versatile and stylish seating option that can be configured to meet your specific needs. With its modular design, you can create a sofa, corner sofa, or even a chaise longue. The assembly process is straightforward and can be completed in under 30 minutes.

The 41905 is constructed from durable materials, including metal and fabric, and is built to last. The cushions are filled with high-density foam for added comfort and support. The sofa also features adjustable feet, so you can level it on uneven surfaces.

Noble House 41905

The Noble House 41905 is a versatile and stylish seating option that can be configured to meet your specific needs. With its modular design, you can create a sofa, corner sofa, or even a chaise longue. The assembly process is straightforward and can be completed in under 30 minutes.

The 41905 is constructed from durable materials, including metal and fabric, and is built to last. The cushions are filled with high-density foam for added comfort and support. The sofa also features adjustable feet, so you can level it on uneven surfaces.

Label Picture Description QTY
A
Side Panel
1
B
Back Support Bar
1
C
Seat Panel
(Labeled with 'face' and
'bottom')
1
D
Leg Support Bar
1
E
Seat Cushion
2
F
Back Cushion
2
Caution : You must read this before you proceed
Right Sofa
Page -4105 OF 8
Label Picture Description QTY
Bolt (M6*20MM)
11
Allen Key
1
Before
Beginnin
g
Assembly
:
Page -4104 OF 8
Step 1
Overview
This Sofa has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Sofa parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Take out the plastic plug in the four ends of the Seat Board(C) using Allen key () as shown
above.
FRONT FACING
Leg Support Bar(D)
Side Panel(A)
Back Support Bar(B)
Seat Panel(C)
Seat Cushion(E)
Back Cushion(F)
Page -4103 OF 8
Step 2
Step 3
Place the Side Panel(A) with its inside facing up.
Insert Seat Panel(C) into the Side Panel(A).
3.1) Attach the Seat Panel(C) to Side Panel(A) using Bolts() with Allen Key() as shown
above.
3.2) Attach the Seat Panel(C) to Side Panel(A) using Bolts() with Allen Key() as shown
above.
Page -4102 OF 8
Step 4
Step 5
Insert the Back Support Bar(B) into the Side Panel(A).
Attach the Back Support Bar(B) to the Side Panel(A) using Bolt() with Allen Key().
Do not fully tighten Bolt.
A
Page -4101 OF 8
Step 6
Insert the Leg Support Bar(D) into the Back Support Bar(B) and Seat Panel(C) as shown above.
Page -4100 OF 8
Step 7
Step 8
7.1) Attach the Leg Support Bar(D) to Back Support Bar(B) and Seat Panel(C) using Bolts() with
Allen Key() as shown above.
7.2) Attach the Leg Support Bar(D) to Seat Panel(C) using Bolt() with Allen Key() as shown
above.
Do not fully tighten Bolts.
Page -4099 OF 8
Step 9
Put Seat Cushions(E) and Back Cushions(F) on the Sofa, and stick the vercro.
Your Left Sofa is ready for use.
Stand the Sofa up.
Place the Sofa on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit onto to the Sofa.
This will help to align all parts at all the joints.
Then get off the Sofa, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute the same process.
If the Sofa is not stable it could lead to damage to the product.
Note: This step is done best with the assistance of a second adult.
Page -4098 OF 8
Label Picture Description QTY
A
Side Panel
1
B
Back Support Bar
1
Caution : You must read this before you proceed
Left Sofa
Page -4105 OF 10
C
Seat Panel
(Labeled with 'face' and
'bottom')
1
D
Leg Support Bar
1
E
Seat Cushion
2
F
Back Cushion
2
Label Picture Description QTY
Bolt (M6*20MM)
11
Allen Key
1
Before
Beginning
Assembly:
Page -4104 OF 10
Overview
This Sofa has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Sofa parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Before
Beginning
Assembly:
FRONT FACING
Leg Support BarD
Side PanelA
Back Support BarB)
Seat PanelC
Seat CushionE
Back CushionF
Page -4103 OF 10
Step 1
Step 2
Place the Side Panel(A) with its inside facing up.
Insert Seat Panel(C) into the Side Panel(A).
Open the carton and place all the parts onto a clean, non-marring surface.
Remove the plastic plugs in the four ends of the Seat Board(C) using Allen Key() as shown
above.
Page -4102 OF 10
Step 3
Step 4
3.1) Attach the Seat Panel(C) to Side Panel(A) using Bolts() with Allen Key() as shown
above.
3.2) Attach the Seat Panel(C) to Side Panel(A) using Bolts() with Allen Key() as shown
above.
Do not fully tighten Bolts.
Page -4101 OF 10
Step 5
Attach the Back Support Bar(B) to the Side Panel(A) using Bolt() with Allen Key().
Do not fully tighten Bolt.
Insert the Back Support Bar(B) into the Side Panel(A).
Page -4100 OF 10
Step 6
Insert the Leg Support Bar(D) into the Back Support Bar(B) and Seat Panel(C) as shown above.
Page -4099 OF 10
Step 7
7.1) Attach the Leg Support Bar(D) to Back Support Bar(B) and Seat Panel(C) using Bolts() with
Allen Key() as shown above.
7.2) Attach the Leg Support Bar(D) to Seat Panel(C) using Bolt() with Allen Key() as shown
above.
Do not fully tighten Bolts.
Page -4098 OF 10
Step 8
Stand the Sofa up.
Place the Sofa on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit onto to the Sofa.
This will help to align all parts at all the joints.
Then get off the Sofa, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute the same process.
If the Sofa is not stable it could lead to damage to the product.
Note: This step is done best with the assistance of a second adult.
Page -4097 OF 10
Step 9
Put Seat Cushions(E) and Back Cushions(F) on the Sofa, and stick the vercro.
Your Left Sofa is ready for use.
Page -4096 OF 10
Label Picture Description QTY
A
Side Panel
1
B
Back Support Bar
1
Caution : You must read this before you proceed
Sofa Corner
Page -4105 OF 9
C
Seat Panel
(Labeled with 'face' and
'bottom')
1
D
Leg Support Bar
1
E
Seat Cushion
1
F
Back Cushion
2
Label Picture Description QTY
Bolt (M6*20MM)
11
Allen Key
1
Before
Beginning
Assembly:
Page -4104 OF 9
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Noble House 41905 Operating instructions

Type
Operating instructions
This manual is also suitable for

Noble House 41905

The Noble House 41905 is a versatile and stylish seating option that can be configured to meet your specific needs. With its modular design, you can create a sofa, corner sofa, or even a chaise longue. The assembly process is straightforward and can be completed in under 30 minutes.

The 41905 is constructed from durable materials, including metal and fabric, and is built to last. The cushions are filled with high-density foam for added comfort and support. The sofa also features adjustable feet, so you can level it on uneven surfaces.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI