Best Redwood PBB-1711721905 Operating instructions

Assembly instructions for Picnic Tables

Step 1.- Locate Table top and 2 A shaped Legs.

Step 2.- Position the table upside down.

Step 3.- Using a ½ Inch ratchet, position A shaped legs underneath

table into position.

Note: align using the numbers printed on each part.

Assembly instructions for Picnic Tables

Step 1.- Locate Table top, 2 A shaped Legs, 2 seats.

Step 2.- Position the table upside down.

Step 3.- Using a ½ Inch ratchet, position A shaped legs underneath

table into position.

Step 4.- Position the seating on top of support beams and insert crews

and tighten with bolts.

Note: align using the numbers printed on each part.

In case of having separate benches: Only align support pieces

underneath the bench, and carefully position the screws in their place,

using a small screwdriver.

Note: align using the numbers printed on each part.

8 Wood galvanized screws will be

wrapped in plastic for each bench.

