Best Redwood PBB-1711361905 Operating instructions

Assembly instructions for Picnic Benches

Step 1.- Locate Seating, 2 (A shaped) Legs and 2 support piece. As well

as, hardware kit. (Screws, bolts, etc).

Step 2.- Position legs into its place at the sides of the seating, and

introduce carriage bolts & screws to tighten them together.

Step 3.- Finally, place the Support pieces into place, and introduce the

wood screws to tighten. (note: holes are pre-drilled, be careful in this

step)

Note: align using the numbers printed on each part and use the

following pictures for support.

8 Wood galvanized screws will be

wrapped in plastic for each bench.



This manual is also suitable for