Motorola MBP669CONNECT-2 User manual

User’s Guide

2.8" Wi-Fi

®

Video Baby Monitor

Models: MBP669CONNECT, MBP669CONNECT-2,

MBP669CONNECT-3, MBP669CONNECT-4

The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...

to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing the Digital Video Baby Monitor. Now you can see

and hear your baby sleeping in another room or you can monitor your older

children in their play room.

Please retain your original dated sales receipt for your records. For

warranty service of your Motorola product, you will need to provide a copy

of your dated sales receipt to confirm warranty status. Registration is not

required for warranty coverage.

For product-related questions, please call:

This User's Guide provides you with all the information you need to get the

most from your product.

Before you use the Digital Video Baby Monitor, we recommend that you

insert and fully charge the battery in the Parent Unit, so that it continues to

work if you disconnect it from the power supply. Please read the Safety

Instructions on pages 7 - 9 before you install the Units.

Got everything?

• 1 x Parent Unit

• 1 x Baby Unit (Camera)

• 1 x Rechargeable Ni-MH battery pack for the Parent Unit

• 1 x Battery door for Parent Unit

• 1 x Power adapter for Parent Unit

• 1 x Power adapter for Baby Unit

In multi-camera packs, you will find one or more additional Camera Units

with power adapters.

+44 (0) 844 557 0890 (UK only)*

*Calls cost 7p per minute plus your telephone company's access charge

+44 (0) 8187 62092 (ROI)

Overview of the Parent Unit

1. Display (LCD screen)

2. Sound Level indicators

Show the sound level detected by

the Baby Unit - the louder the sound

detected, the more LEDs light up.

The first green LED flashes while in

pairing mode.

3. Power/Link indicator

Lights up in green when the Parent

Unit is turned on.

4. Charging indicator

Lights up in blue when the power

adapter is plugged in. Lights up in

red when the battery is low.

5. Control key panel

UP / VOLUME+

Press to increase speaker volume.

When in a menu, press to scroll up.

DOWN / VOLUME -

Press to decrease speaker volume.

When in a menu, press to scroll

down.

LEFT / VIDEO ON-OFF

Press to turn the display ON or OFF.

When in a menu, press to choose

the option on the left.

RIGHT / ZOOM

Press to zoom in or out.

When in a menu, press to choose

the option on the right.

O

Press to Enter/Exit remote scan

mode.

When in a menu, press to choose an

item, or save a setting.

6. Microphone

7. TALK button T

Press and hold to speak to your

baby.

8. DC Power micro-USB Socket

9. Menu button M

Press to open menu options.

10. POWER ON/OFF button 0

Press and hold to turn the Unit on or

off.

11. Battery Cover

12. Stand

13. Speaker

1

2

34

5

6

7

8

9

10

11

12

13

Parent Unit menu icons

Signal Level Indication (4 Levels)

Night Vision Mode (Video also changes to Black/White)

Battery Level Indication (4 Levels)

Volume Level Control (8 Levels + Off)

Camera Control (scan, view, add, delete)

Set Video On Timer (5min, 30min, 60min)

Brightness Level Control (8 Levels)

Zoom Level Control (1X, 2X)

Audio Playlist (Lullaby, Soothing song, Audio book and Personal

audio playback )

Alarm Setting (6h, 4h, 2h, OFF)

Temperature Scale setting in menu (ºC / ºF).

Readings turn RED if > 29ºC / 84ºF, and reading displays

HH ºC / ºF > 36ºC / 97 ºF

Readings turn RED if < 14ºC / 57ºF, and reading displays

LL ºC / ºF < 1ºC / 34 ºF

Multi-screen option (only available if more than one camera paired to

the parent unit.)

Overview of Your Baby Unit

1. Photo Sensor (Night Vision Mode)

2. Camera Lens

3. Infrared LEDs (x 8, for night vision)

4. Power LED

On when linked to Parent Unit

Flashes when searching for Parent

Unit

5.

Microphone

6. Camera Battery LED

On when AC power is connected to

camera.

Flashes when the battery level of the

camera is low.

7. POWER ON/OFF switch

8. Temperature Sensor

9. Power Adapter Outlet

10. PAIR Button

11. Speaker

12. Star Grip or Tripod Mount

13. Antenna

Important guidelines for installing your Baby Monitor

• To use your Video Monitor Baby and Parent Units together, you must be able to

establish a radio link between them, and the range will be affected by environmental

conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or

reinforced concrete between the Baby and Parent Unit may block the radio signal.

• The signal strength may also be reduced by other solid structures, like walls, or by

radio or electrical equipment, such as TVs, computers, cordless or mobile phones,

fluorescent lights or dimmer switches.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi

®

routers),

Bluetooth™ systems, or microwave ovens, may cause interference with this product,

so keep the Baby Monitor away at least 1 metre from these types of products, or turn

them off if they appear to be causing interference

• If the signal is weak, try moving the Parent and/or the Baby Unit to different positions

in the room(s).

6 Table of contents

Table of contents

1. Safety Instructions ..................................................................................... 7

2. Getting Started........................................................................................ 10

2.1 Baby Unit Power Supply............................................................................ 10

2.2 Parent Unit Battery Installation .................................................................. 11

2.3 Parent Unit Power Supply ......................................................................... 12

2.4 Desktop Stand of the Parent Unit ............................................................. 13

3. Using the Baby Monitor........................................................................... 14

3.1 Setting Up.................................................................................................. 14

3.2 Night Vision Mode .................................................................................... 14

3.3 Video ON/OFF ......................................................................................... 14

3.4 Talk Mode.................................................................................................. 14

3.5 Temperature Display (HH °C / °F or LL °C / °F)...................................... 14

4. Parent Unit Menu Options ...................................................................... 15

4.1 Adjust Speaker Volume ............................................................................ 15

4.2 Zoom ........................................................................................................ 15

4.3 Set Screen Off Time on the Parent Unit ................................................... 15

4.4 Pan and Tilt ...................... ......................................................................... 16

4.5 LCD Brightness t ....................................................................................... 16

4.6 Set Alarm time for the Parent Unit ............................................................ 17

4.7 Monitor the Temperature ........................................................................ 17

4.8 Audio Playlist ............................................................................................. 17

4.9 Camera Control ....................................................................................... 18

5. Wi-Fi

®

Internet Viewing.......................................................................... 20

5.1 Minimum System Requirements .............................................................. 20

5.2 Getting Started - Connecting Devices..................................................... 21

5.3 User Account and Camera Setup on Android™ Devices....................... 22

5.4 User Account and Camera Setup on iPhone

®

/iPad

®

............................. 26

5.5 Camera Functions: ................................................................................... 32

5.6 Working with PC/Notebook .................................................................... 35

5.7 Procedure for Resetting the Camera ....................................................... 35

6. Disposal of the Device (Environment).................................................... 36

7. Cleaning .................................................................................................. 37

8. Help.......................................................................................................... 38

9. General Information ................................................................................ 45

10. Technical Specifications ......................................................................... 50

4.10 Multi-Camera Use .................................................................................... 19

Safety Instructions 7

ENGLISH

1. Safety Instructions

WARNING

:

Strangulation Hazard: Children have

STRANGLED in cords. Keep this cord out

of the reach of children (more than

1

m

away). Never use extension cords with AC

Adapters. Only use the AC Adapters

provided.

8 Safety Instructions

WARNING

This Digital Video Baby Monitor is compliant with all relevant standards

regarding electromagnetic fields and is, when handled as described in the

User's Guide, safe to use. Therefore, always read the instructions in this User's

Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when

assembling.

• This product is not a toy. Do not allow children to play with it.

• This Digital Video Baby Monitor is not a substitute for responsible adult

supervision.

• Keep this user's guide for future reference.

• Keep the cords out of reach of children.

• Do not cover the Digital Video Baby Monitor with a towel or blanket.

• Test this monitor and all its functions so that you are familiar with it prior to

actual use.

• Do not use the Digital Video Baby Monitor in damp areas or close to water.

• Do not install the Digital Video Baby Monitor in extreme cold or heat, direct

sunlight, or close to a heat source.

• Only use the chargers and power adapters provided. Do not use other

chargers or power adapters as this may damage the device and battery pack.

• Only insert a battery pack of the same type.

• Do not touch the plug contacts with sharp or metal objects.

• Connect the power adapters to easily accessible mains power sockets.

CAMERA SET UP & USE:

• Choose a location for the Baby Unit that will provide the best view of

your baby in his/her cot.

• Place the Baby Unit on a flat surface, such as a dresser, bureau or

shelf, or mount the Baby Unit on a wall securely using the keyhole

slots in the underside of the stand.

• NEVER place the Baby Unit or cords within the cot.

Safety Instructions 9

ENGLISH

CAUTION

There is a risk of explosion if the battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

The Unit shall be setup and used so that parts of the user's body other than the

hands are maintained at a distance of approximately 20 cm (8 inches) or more.

10 Getting Started

2. Getting Started

2.1 Baby Unit Power Supply

1. Connect the small plug of the power adapter to the Baby Unit (camera) and

the other end to a suitable mains power socket.

NOTE

Only use the enclosed Power Adapter (5V DC / 1000mA).

2. Slide the POWER ON/OFF switch to the ON position to turn the Baby Unit

on.

3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby

Unit off.

Getting Started 11

ENGLISH

2.2 Parent Unit Battery Installation

A rechargeable battery pack is supplied and should be installed and charged, so

that the Parent Unit can be moved without losing the link and picture from the

Baby Unit(s).

Charge the battery in the Parent Unit before using it for the first time or when the

Parent Unit indicates that the battery is low (flashes in red).

1. Unclip and remove the battery compartment cover.

2. Insert the plug of the battery pack into the socket inside the battery

compartment, and fit the battery pack into the compartment.

3. Replace the battery compartment cover, and pull out the desktop stand

(refer to section 2.4).

Black

Red

12 Getting Started

2.3 Parent Unit Power Supply

1. Insert the DC Micro-USB plug of the power adapter into the micro-USB

power socket on the side of the Parent Unit.

2. Connect the other end of the power adapter to a suitable mains power

socket. The blue Charging indicator turns on.

IMPORTANT

Only use the supplied power adapter (5V DC / 1000mA) and battery pack.

While the Parent Unit can work with the power adapter connected, without a

battery pack, it is recommended that you install and charge the rechargeable

battery pack fully before use. This will allow the Parent Unit to operate on

battery in the event of a power failure, or when moving to a different room.

3. Once the Baby and Parent Units are both switched ON, the display on the

Parent Unit will show the colour image captured by the Baby Unit. But if the

room is dark, the image will be displayed in black and white and with a

icon, due to infra-red illumination by the Baby Unit.

4. If there is no connection or you are out of range, the video display will go

off, a symbol will appear on the LCD screen, and the Parent Unit will

beep. Move the Parent Unit closer to the Baby Unit to re-establish the link.

Getting Started 13

ENGLISH

2.4 Desktop Stand of the Parent Unit

Flip out the stand on the back of the Parent Unit to set up the desktop stand.

14 Using the Baby Monitor

3. Using the Baby Monitor

3.1 Setting Up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor.

• Adjust the Baby Unit’s camera angle by rotating it up, down, left and right

until you are satisfied with the image that appears on the Parent Unit.

NOTE

Do not place the Baby Unit within reach of a child or baby. If there is

interference with the picture or sound, try moving the Units to different locations,

and ensure that they are not close to any other electrical equipment.

3.2 Night Vision Mode

The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in

the dark. When the built-in photo sensor on the front of the Unit detects a low

level of ambient light, the LEDs will automatically activate and the screen on the

Parent Unit will display in black and white. The icon will be displayed at the

top of the screen.

3.3 Video ON/OFF

Press the VIDEO On/Off button on the Parent Unit to turn the LCD display

on or off, but still leaving the audio monitor on.

3.4 Talk Mode

Press and hold the TALK button T on the Parent Unit to talk to your baby through

the Baby Unit’s loudspeaker. The

T icon will be displayed at the top of the LCD

screen.

3.5 Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the Baby

Unit will be displayed at the top of the LCD screen. The readings will turn RED if

the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will

change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading

will change to LL °C / °F if the temperature falls below 1°C / 34°F.

<

Parent Unit Menu Options 15

ENGLISH

M

O

>

M

O

<

M

O

>

M

O

<

4. Parent Unit Menu Options

4.1 Adjust Speaker Volume

You can adjust the speaker volume from

Volume 1

to

Volume 8

, or turn it off .

Press + or - on the Parent Unit when it is in camera viewing mode.

4.2 Zoom

You can zoom in or out while viewing the image from a Baby Unit.

1. Press to zoom in.

2. Press to zoom out.

4.3 Set Screen Off time for the Parent Unit

When the Parent Unit is operating on battery only, the screen turns off if no

buttons are pressed for a specific time interval, to help extend the battery

operation time. The audio will still be heard even when the screen is off. You can

change the screen off time to 5mins, 30mins or 60mins.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to select (

60mins

,

30mins

,

5mins

or

OFF

).

4. Press O to confirm your selection.

<

>

4.4 Pan and Tilt

4.5 LCD Brightness

You can adjust the brightness of the Parent Unit screen from level 1 to level 8.

1. Press M when the Parent Unit is in camera viewing mode,

is displayed.

2. Press or to adjust the brightness.

2. Use the button to pan around the image.

3. Press the button to exit menu mode.

1. Press the button when the Parent Unit is in camera viewing mode.

<

>

16 Parent Unit Menu Options

M

O

>

M

O

<

M

O

>

M

O

<

M

O

>

M

O

<

4.7 Monitor the Temperature

Your Baby Unit measures the surrounding temperature, which is displayed at the

top of the Parent Unit screen. The reading only updates about once a minute,

and should only be used as a general indication of the temperature around the

Baby Unit. If the detected temperature goes beyond a preset temperature

range (14 - 29

o

C/57 - 84

o

F) the temperature display changes to red. You can

change the setting for the temperature format (°F or °C) as follows:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to choose

°F

or

°C

.

4. Press M to save the setting and return to camera viewing mode.

<

>

4.6 Set Alarm Time on the Parent Unit

You can use the Parent Unit to set a 2, 4 or 6 hour alarm as a reminder for you to

take care of your baby.

If an alarm time is selected, the blue alarm icon will appear at the top of the screen.

The Parent Unit will beep at the end of the selected

2

,

4

or

6

hour period. The alarm

will reset and start the next time period after 60 seconds or by pressing any button

on the Parent Unit.

Turn on and set the alarm when it is currently off:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to choose

2h

,

4h

or

6h

.

4. Press M to save the setting and return to camera viewing mode.

Turn off the alarm when it is currently on:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to choose

Off

.

4. Press M to save the setting and return to camera viewing mode.

<

>

<

>

Parent Unit Menu Options 17

ENGLISH

M

O

>

M

O

<

M

O

M

O

<

4.8 Audio Playlist

You can playback audio content - Lullabies, Soothing Sounds and Audio

Book (English only) on the Baby Unit. The audio content can be

downloaded and stored in the Baby Unit via Hubble App. You have 10

preloaded lullabies/soothing sounds and 10 audio books in the Baby

Unit.

4.8.1 Lullaby/Soothing Sounds Playback

• Press M button then or to scroll to option at the menu bar.

• Scroll or button to select then confirm with O button.

• Press or button to view the desired Lullabies/Soothing Sounds.

The song name appears on the screen.

• Press O button to play the selection.

4.8.2 Audio Book (English only) Playback

• Press O button to play the selection.

4.8.3 Personal Audio Playback

NOTE

Before playback your personal audio, you are required to record your audio

following the instructions in Hubble for Motorola Monitors App.

<

>

• Press M button then or to scroll to option at the menu bar.

• Scroll or button to select then confirm with O button.

• Press or button to view the desired Audio Book. The book title

appears on the screen.

<

>

• Press M button then or to scroll to option at the menu bar.

• Scroll or button to select then confirm with O button.

• Press or button to view your personal audio, the audio list

appears on the screen.

• Press O button to play the selection.

<

>

18 Parent Unit Menu Options

M

O

>

M

O

<

M

O

>

M

O

<

4.9 Camera Control

4.9.1 Add (pair) a camera

6. Press and hold the PAIR button underneath the camera unit until the

parent unit finds the camera, beeps and the picture from the camera

appears.

NOTE

A camera can only be registered to one parent unit at any one time.

4.9.2 Delete a camera

Note:

You are not allowed to delete the camera if there is only one registered camera

in the system.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or button to scroll to .

3. Press or button to choose (

add)

.

4. Press the O button to confirm, will pop up.

5.

Press or button to select the desired camera position, and press

O button to start searching for a amera unit. The green audio level

LED will flash rapidly while searching.

<

>

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or button to scroll to .

3. Press or button to choose (

delete)

.

<

>

4. Press O button to confirm, will pop up.

5. Press or button to select the desired camera, and press O

button to delete that registration.

M

O

>

M

O

<

M

O

>

M

O

<

M

O

>

M

O

<

ENGLISH

Parent Unit Menu Options 19

4.10 Multi-Camera Use

You can pair up to 4 cameras with the Parent Unit. If more than one camera is

paired with the Parent Unit, you can select which camera to view or set it in

Patrol mode , where the Parent Unit automatically cycles through the paired

cameras about every 15 seconds.

You can also select a multi-picture screen option, where all the paired cameras

can be viewed at the same time, but with smaller images.

NOTE

The audio from a camera can only be heard on the Parent Unit when that

camera is selected. In the multi-picture screen option, the selected camera

picture has a red frame.

4.10.1 View a camera

4.10.2 Scan camera

4. The screen will then display images from different registered cameras in a

loop of Camera , changing about every 12 seconds.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or button to scroll to .

3. Press or button to choose (

view)

.

<

>

4. Press O button to confirm, will pop up.

5. Press or button to select the desired camera, and press O button

to view the picture from that camera.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or button to scroll to .

3. Press or button to choose (scan

)

, and Press O button to confirm.

<

>

4.10.3 Multi-picture option

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to select OFF or ON.

4. The multi-picture view indicates the selected camera with a red frame, and

the audio is only heard from that selected camera. Press , , or

>

to select a different camera.

<

>

<

>

<

>

<

>

<

>

<

5. Wi-Fi

®

Internet Viewing

5.1 Minimum System Requirements

Web Portal

• Windows

®

7

• Mac OS

®

10.7

• Chrome™ 24

• Internet Explorer

®

9

• Safari

®

6

• Java™ 7

• Firefox

®

18.0

• Adobe

®

Flash

®

Player 15.0

Android™ System

• Version 5.0 or above

iPhone

®

/iPad

®

iOS

• Version 8.0 or above

High Speed (Wi-Fi

®

) Internet

• At least 0.6 Mbps upload bandwidth per camera (you can test your internet

speed on this site: http://www.speedtest.net)

20 Wi-Fi® Internet Viewing

Page is loading ...

Motorola MBP669CONNECT-2 User manual

This manual is also suitable for

Motorola MBP669CONNECT-2 User manual

Related papers

Other documents