MiniGadgets HDLiveCam User guide

Quick Start Guide - iPhone & iPad

1. Download the “HDLiveCam” app.

Scan the QR code to the left,

or visit www.minigadgets.com/hdlcios

on your iPhone or iPad.

• Before proceeding, open the app, make an account, and log in

2. After creating an account and logging into the app: Power on your

device, then connect to the device’s Wi-Fi signal on your iPhone

or iPad. Go to your Settings > Wi-Fi and connect to the the CARE-AP

signal being broadcasted (the below is an example of this signal)

3. Once connected, open the HDLiveCam app. It will automatically

detect that you are connected and ask: “The hotspot of the camera is

currently connected. Whether to watch the camera through a direct

connection.” Choose ‘OK”.

• If this does not happen, please go to your iPhone or iPads Settings >

Privacy > Local Network and make sure HDLiveCam is enabled.

4. Select the bottom button that reads ‘Set up camera Wi-Fi’

5. Select the Wi-Fi network to pair the device to and input the

password for the chosen Wi-Fi network. Then press ‘Connect’.

6.Confirm the wi-fi network and password you chose with ‘OK’.

7. A progress bar will appear and say ‘Connecting to the

camera’. Once it reaches 100% the app will ask you to name the

Camera (ex: living room, kitchen, den, etc.)

8. Your camera is now added to your router and available for remote

viewing. Tap on the picture displayed to enter the livestream.

• If your network is still not listed, move closer to the router.

• If the camera fails to connect, please hit ‘Retry’ and try moving the

device closer to the router it is being paired to.

Scan for instructional videos regarding recording to

the microSD card and motion alerts