2. Inkbird
  3. IWS-WD1 Water Leak Sensor

Inkbird IWS-WD1 Water Leak Sensor User manual

  • Hello! I'm a chat assistant that has reviewed the INKBIRD IWS-WD1 water leak sensor user manual. This document provides instructions on how to set up and use the device, including how to connect it to your phone app, understand its features and how to reset the Wi-Fi. I am ready to answer your questions about this device.
  • How do I connect the device to my phone?
    What kind of batteries does the device use?
    How can I reset the Wi-Fi network?
- 01 - - 02 - - 03 - - 04 -
3.3.1 Open the app and click “+” in
the upper right corner to choose
IWS-WD1 to start the connection.
3.3.2 Please make sure the device
batteries are installed correctly.
When the blue light flashes once,
confirm and click "Next Step" to
continue.
- 05 -
3.3.3 Please select the Wi-Fi
network you want to connect to
and enter the password, then
click "Next Step" to continue.
3.3.4 Please press and hold the
device button until the indicator light
flashes to enter the pairing status.
Click "Confirm" to continue.
- 06 -
3.3.5 The phone app will automati-
cally scan and find the device.
Once the device is found, confirm
and click "Next Step" to continue.
- 07 - - 08 - - 09 - - 10 -
V2.0
/