Arlo VMC3040S-100NAS User manual

June 2016

User Manual

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

202-11598-04

Arlo Q

™

Arlo Q

™

and

2

Support

For product updates and web support, visit http://www.arlo.com/en-us/support/.

Trademarks

reference purposes only.

Compliance

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

3

Contents

1. Set Up Your System 6

Connect Your Arlo Q or Arlo Q Plus Camera ��6

Set Up a New Camera ��8

Add a Camera From Another Arlo Account ��10

Arlo Q Camera Position ��12

Place or Mount Your Arlo Q Camera ��12

Use Arlo With IFTTT ��13

2. View Your Content 14

View the Cameras Page ��14

View Camera Feeds �� 15

Pan and Zoom Video ��15

Record Clips From Live Video ��16

Take a Snapshot From Live Video ��16

Talk and Listen �� 17

Control the Camera Feed Image ��17

Cloud Recording �� 19

View Recordings and Snapshots �� 20

3. Use an SD Card With Arlo Q Plus 23

Insert an SD Card ��23

View the SD Card Status ��23

Safely Eject and Remove an SD Card ��24

View Video Clips on an SD Card ��25

Change the SD Card Overwrite Setting��26

Format an SD Card ��26

Turn SD Card Recording O and On �� 27

4

4. Personalize Your Camera 28

Name Your Camera ��28

Proﬁle Settings ��28

Grant Access to Friends �� 30

5. Modes, Rules, and Smart Alerts 33

Select a Mode �� 33

Change Motion Sensitivity ��35

Change Audio Sensitivity �� 36

Manage Alerts �� 37

Set Up Geofencing ��38

Geofencing With Multipe Mobile Devices ��39

Geofencing Accuracy ��40

Geofencing First In Last Out ��41

Schedule Your Camera Rules ��41

Add a Mode ��44

Motion Detection Activity Zones �� 45

6. Settings 48

Turn the Arlo App Fingerprint ID Login On and O 48

Change the Time Zone �� 48

Status LED ��49

Audio Settings �� 51

Change the WiFi Network ��53

View Device Information �� 53

Restart the Camera��54

Remove a Camera From Your Account �� 54

5

7. Manage Your Subscription Plan 56

Subscription Plans ��56

Renew Your Service Plan �� 56

Select a Premier or Elite Subscription Plan ��56

Start or Stop a Continuos Video Recording Plan 57

8. Continuous Video Recording 58

View the Timeline �� 58

Navigate Through the Timeline ��59

View the Timeline Calendar �� 60

9. Troubleshooting 61

Manage Bandwidth for Streaming ��61

Can’t See Video Streams in a Browser ��61

Not Receiving Push Notiﬁcations ��61

6

1. Set Up Your System

Setting up your Arlo Q camera involves a few simple steps: Get the Arlo app, and then

use the app to get an Arlo account and connect your camera to your network. Your

Arlo account lets you view videos from any Internet-connected computer or mobile

device. You can use the same Arlo app to set up and manage both Arlo Q and Arlo

Wire-Free Cameras.

Connect Your Arlo Q or Arlo Q Plus Camera

You can connect your Arlo Q camera using WiFi. You can connect your Arlo Q Plus

camera to the Internet in any of three dierent ways:

• WiFi. Connect the Arlo Q or Arlo Q Plus camera to your router using WiFi and

power the camera with the included micro USB cable and power adapter.

• Arlo Q Plus Power over Ethernet (PoE). Connect the Arlo Q Plus

camera to a PoE switch using the included PoE adapter if you want to power

and connect the camera to the Internet with a single cable.

• Arlo Q Plus Ethernet. Connect the Arlo Q Plus camera to your router with

Ethernet, but power the camera with the included micro USB cable and power

adapter.

Connect an Arlo Q or Arlo Q Plus Camera With WiFi

¾ To connect an Arlo Q or Arlo Q Plus camera with WiFi:

1. Connect the micro USB cable that was included with your camera to the

connector on the back of the camera.

For Arlo Q Plus, connect the micro USB cable to the larger half of the port on

the back of the camera. See the following diagram.

This example shows

an Arlo Q Plus camera

7

Set Up Your System

2. Connect the other end of the micro USB cable to the power adapter.

3. Plug the USB adapter into a wall socket and wait for the camera LED to blink

amber.

4. Continue installing your camera.

For more information, see Set Up a New Camera on page 8.

Connect an Arlo Q Plus Camera With PoE

¾ To connect an Arlo Q Plus camera with PoE:

1. Connect the PoE adapter to the camera.

2. Connect your own Ethernet cable to the PoE adapter.

3. Connect the other end of the Ethernet cable to your PoE switch.

4. Continue installing your camera.

For more information, see Set Up a New Camera on page 8.

8

Set Up Your System

Connect an Arlo Q Plus Camera With Ethernet

¾ To connect an Arlo Q Plus camera with Ethernet:

1. Connect the PoE adapter to the back of your camera.

2. Connect your own Ethernet cable to the PoE adapter.

3. Connect the other end of the Ethernet cable to an Ethernet switch or a router.

4. Connect the included micro USB cable to the side of the PoE adapter.

5. Connect the other end of the micro USB cable to the USB power adapter.

6. Plug the USB adapter into a wall socket.

7. Continue installing your camera.

For more information, see Set Up a New Camera on page 8.

Set Up a New Camera

On mobile devices, use the Arlo app for the best viewing experience. Visit the Apple

App Store, the Amazon App Store, or the Google Play Store to download the Arlo

app for iOS and Android devices.

¾ To set up a new Arlo Q or Arlo Q Plus camera:

1. Tap the Arlo icon

on your mobile device.

Your moble device must be connected to the same WiFi network as the Arlo

camera.

1

2

4

5

6

9

Set Up Your System

You can also enter arlo.netgear.com in the address bar of a browser.

If you are using a mobile device with a Touch ID® ﬁngerprint identity sensor,

you are prompted to enable Touch ID or skip.

2. To use Touch ID, tap Enable Touch ID.

If you tap Skip, you can turn on the Arlo app ﬁngerprint ID login later. See Turn

the Arlo App Fingerprint ID Login On and O on page 48.

3. Click or tap New System Setup.

A list of cameras displays.

4. Click or tap the camera that you want to set up.

5. Apply power to your camera:

• Arlo Q camera. Plug in your Arlo Q camera.

• Arlo Q Plus or Arlo Q camera WiFi connection. See Connect an Arlo Q or

Arlo Q Plus Camera With WiFi on page 6.

• Arlo Q Plus camera PoE connection. See Connect an Arlo Q Plus Camera

With PoE on page 7.

• Arlo Q Plus camera Ethernet connection. See Connect an Arlo Q Plus

Camera With Ethernet on page 8.

6. Wait until the camera LED is blinking amber.

A slow blinking amber LED indicates that the camera is powered on and is ready

for setup.

7. Click or tap Continue.

8. Enter the name and password for the WiFi network that you want your camera

to connect to.

10

Set Up Your System

If you use an existing Arlo Wire-free system, do not sync your Arlo Q camera to

your base station.

9. Press the Sync button on your camera until the blue LED starts blinking.

A slow blinking blue LED indicates that the camera is connecting to a WiFi

network. A fast blinking blue LED indicates that the camera is connecting to

Arlo servers.

10. Click or tap Continue.

11. Hold the QR code 4 to 8 inches (10 to 20 cm) in front of the camera until you

hear a chime sound.

12. Click or tap Yes if you heard a chime sound.

Click or tap No if you did not hear a chime sound.

13. Wait for the app to discover the Arlo Q camera.

If you did not hear a chime sound, try moving the camera closer to or farther

away from the QR code. If you hear a buzz sound, try the following remedies:

• Check to ensure that you entered the WiFi network name and password

correctly. The WiFi network name and password are case-sensitive.

• Try moving your Arlo Q camera closer to your WiFi router. Do not place your

camera farther than 300 feet (91 meters) from your WiFi router.

Note: For initial setup, you can place the camera in the same room as your WiFi router,

and then move the camera to another location aer you ﬁnish the setup. During setup,

the Arlo Q camera must connect to the same WiFi network that you plan to use later.

14. Choose a service plan.

For more information, see Subscription Plans on page 56.

Your Arlo account is set up.

Add a Camera From Another Arlo Account

¾ To add a camera from another Arlo account:

1. Tap the Arlo icon

on your mobile device.

You can also enter arlo.netgear.com in the address bar of a browser

The Cameras page displays.

11

Set Up Your System

2. Log in to the old Arlo account.

3. Click or tap Settings.

The Settings page displays.

4. Click or tap My Devices.

A list of cameras displays.

5. Click or tap the camera.

The settings for the camera display.

6. Scroll down and click the Remove Device button.

The camera is removed from your account.

7. Log out of the Arlo app.

8. Log in to your current Arlo account.

9. Click or tap Add Device.

10. Click or tap the image of the Arlo Q camera.

11. Plug in your camera and wait until the light is blinking amber.

A slow blinking amber LED indicates that the camera is powered on and is ready

for setup.

12. Click or tap Continue.

13. Enter the name and password for the WiFi network that you want your camera

to connect to.

14. Click or tap Continue.

15. Press the Sync button on your camera until the blue light starts blinking.

A slow blinking blue LED indicates that the camera is connecting to a WiFi

network. A fast blinking blue LED indicates that the camera is connecting to

Arlo servers.

16. Click or tap Continue.

Your monitor or mobile device displays a QR code.

12

Set Up Your System

17. Hold your camera in front of your monitor or hold your smartphone or mobile

device in front of your camera until you hear a chime sound.

18. If you hear a chime sound, click or tap Yes.

19. If you do not hear a chime sound, click or tap No and follow the onscreen

instructions.

Arlo Q Camera Position

When positioning your Arlo Q camera, keep these tips in mind:

• Avoid positioning the camera in an area that gets a lot of light shining directly

into the camera lens.

• You can conﬁgure Arlo Q cameras to monitor part of the ﬁeld view and to

detect motion only in the areas that you want monitor.

• Keep active locations in the camera’s ﬁeld of view.

Arlo Q provides a 130-degree viewing angle. Position your camera so that the

space that you want to monitor is within the camera’s ﬁeld of view.

• Aim with the cloud.

To help with positioning your camera, do a live stream from the Arlo Q camera.

Aim the camera while watching the video feed on your Arlo smartphone app to

make near-real-time adjustments to the camera’s position.

Place or Mount Your Arlo Q Camera

You can place your Arlo Q camera on a shelf or a ﬂat surface or you can mount it

on the wall.

¾ To mount your Arlo Q camera on the wall:

1. Make sure that the mounting plate is separate from the camera base.

13

Set Up Your System

2. Place the wall plate and secure it in place with four screws.

Note: If you’re mounting the camera to drywall, be sure to use the plastic drywall

anchors that are provided.

3. Slide the camera into the wall plate.

Arlo Q also comes with a magnetic plate that can attach to any ﬂat steel or iron

surface. (Magnets do not stick to aluminum or stainless steel.)

Caution: Do not attempt to mount the Arlo Q camera to a half-dome Arlo Wire-free

Camera mount. This might result in the camera falling from the mount and being

damaged.

For more information, see the YouTube video How to Install Arlo Q Smart Home

Security Camera.

Use Arlo With IFTTT

You can use the Arlo app with If This Then That (IFTTT), a free cloud-based service,

that connects smart home devices and applications.

To add Arlo to your IFTTT app, visit https://ifttt.com/channels and see Security and

Monitoring Systems.

To learn more about Arlo and IFTTT, visit the NETGEAR Arlo community.

14

2. View Your Content

Videos recorded by your camera are stored in a library. You can view your recordings

and snapshots, mark them as favorites, and search using the ﬁlter.

View the Cameras Page

When you launch the Arlo app, the Cameras page displays.

Live Feed

Icon

Click or tap Live to display Camera Icon Display is based on the mode and

camera setup

Pause Motion detection is on

Record video manually Sound detection is on

Snapshot WiFi signal

Brightness Arlo Q Plus power

Microphone. Start using Talk and Listen Arlo Q Plus Ethernet

Speaker. Mute the audio Arlo Q Plus SD card

Full screen.

Camera name

Camera feed

Camera icons

Select

cameras

Optional continuous

video recording (CVR)

View oers

New recordings

Snapshot and

video library

Detection

modes

Settings

View Your Content

15

View Camera Feeds

You can view your Arlo Q camera feeds at any time.

¾ To view camera feeds:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays. The icons above each camera feed depend on the

rules in the currenty selected mode and how the camera is connected.. For

information about these icons, see View the Cameras Page on page 14.

2. To view and listen to a live feed, click or tap Live on the camera feed image.

A row of live feed icons displays below the live stream image for the camera.

3. To stop viewing and listening to the live feed, click or tap the Pause icon.

Pan and Zoom Video

You can pan and zoom to focus in on the high-def details of any live or recorded

video. Just pinch and drag any image as you do with photos on your smartphone.

¾ To pan and zoom video:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Library.

The calendar displays on the top of the page.

3. Click or tap any live video or prerecorded video from your Arlo library.

4. To pan and zoom using a mobile device, do the following:

• To zoom in and out of the video, use the pinch gesture.

• To move around the zoomed-in frame, touch and drag.

View Your Content

16

5. To pan and zoom using a computer, do the following:

• To zoom in and out, click the Zoom icon.

• To move around in the frame, use your mouse button.

Record Clips From Live Video

¾ To record clips from live video:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Live in the camera feed image.

The camera feed icons display at the bottom of the camera feed image.

3. Click or tap Record Video

.

This icon turns red to indicate that you are recording the live feed.

4. To stop recording, click or tap Record Video

.

Take a Snapshot From Live Video

¾ To take a snapshot from live video:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Live in the camera feed image.

3. Click or tap Snapshot

.

The snapshot is saved in your library.

View Your Content

17

Talk and Listen

¾ To talk and listen:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Live in the camera feed image.

3. Click or tap Microphone

.

A microphone button displays.

4. Wait for the button to turn bright green.

This can take up to ﬁve seconds. When the button is bright green, Talk and

Listen is ready.

5. Press and hold or click and hold the Microphone button and speak.

Control the Camera Feed Image

If you use more than one camera, you can change the order in which the camera feeds

are displayed on the Cameras page. You can also zoom, invert, or rotate the camera

feed image.

Change the Camera Order

¾ To change the camera order on the Cameras page:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Settings.

The Settings page displays.

View Your Content

18

3. Under System, click or tap Camera Order.

A list of cameras displays in the order that they display on the Cameras page.

4. If you are using a smartphone or tablet, tap Edit at the top of the page.

A list icon displays.

5. Tap and hold or right-click the list icon and drag the camera to the correct

position on the list.

6. Click or tap Done.

Your settings are saved.

Zoom a Camera Image

To zoom a camera image:

1. Tap the Arlo icon

on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Settings > My Devices.

A list of cameras displays.

3. Click or tap the camera.

The camera settings display.

4. Click or tap Video Settings.

5. Under Activity Zones, click or tap Zoom

.

6. Resize and position the image box as necessary.

7. Click or tap Zoom

.

Your settings are saved.

View Your Content

19

Rotate a Camera Feed

You can invert the video feed image.

¾ To rotate the video display:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Settings > My Devices.

A list of cameras displays.

3. Click or tap the camera.

The camera settings display.

4. Click or tap Video Settings.

The Video Settings page displays.

5. Click or tap Rotate Image.

6. The camera feed image is inverted.

Cloud Recording

With cloud recording, everything the Arlo Q cameras record is sent to the cloud

for secure storage in your library. You can access these recordings from anywhere

you are using a mobile device, or on a Windows or Mac computer. All recordings

are encrypted with the user name and password you that create. No one else can

access your recordings.

We provide free cloud storage for the life of the Arlo Q cameras. We store a rolling

7 days of recordings that are created when the Arlo Q camera detects motion or

sound. You can pay to store recordings in the cloud for the last 14 days or 30 days.

You can download recordings and save them to your mobile device or computer for

long-term storage.

View Your Content

20

View Recordings and Snapshots

Your Arlo Q camera stores recordings and snapshots in the library. You can use the

ﬁlter and the calender to ﬁnd and view speciﬁc recordings.

Use the Library

You can use the library to ﬁnd and view recordings based on the date.

¾ To use the library:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter arlo.netgear.com in the address bar of a

browser.

The Cameras page displays.

2. Click or tap Library.

The calendar displays on the top of the page.

3. If it is more than one month since you started recording, use the arrows on

either side of the month to select a month to view.

Days on which a video clip was recorded are indicated with a green circle.

4. Click or tap a highlighted date.

Recordings from that date display below the calendar.

Arlo VMC3040S-100NAS User manual

Related papers

Other documents